Skip to content
Tutorials Center
My learning

Topics

Lesson 9 of 39 · Measurement, Units and Vectors

Vector Components and Addition

Resolve vectors into x and y components with sine and cosine, add vectors by components, and find the magnitude and angle of any resultant.

Drawing arrows is fine for a sketch, but it is slow and imprecise. The reliable method is to split every vector into components along two perpendicular axes, usually x (horizontal) and y (vertical). Then vector addition becomes ordinary addition of numbers.

Resolving a vector

A vector A of magnitude A at an angle θ above the positive x-axis has components:

Aₓ = A cos θ A_y = A sin θ

These come from a right triangle where A is the hypotenuse. To go back:

A = √(Aₓ² + A_y²) θ = tan⁻¹(A_y / Aₓ)

For example, a force of 50 N at 30° above the x-axis has Fₓ = 50 cos 30° ≈ 43.3 N and F_y = 50 sin 30° = 25 N.

flowchart LR
    A["Vector A<br/>50 N at 30°"] --> X["Ax = A cos θ<br/>43.3 N"]
    A --> Y["Ay = A sin θ<br/>25 N"]

A vector splits into a horizontal and a vertical part.

The formulas cos for x and sin for y assume θ is measured from the x-axis. If your angle is measured from the y-axis, the roles swap. Always sketch the triangle and decide which side is adjacent.

Python Resolve a vector into components

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Signs of components

Angles measured counterclockwise from +x give correct signs automatically. A vector pointing left has a negative x component; one pointing down has a negative y component.

Quadrant Angle range Aₓ A_y
I 0° to 90° + +
II 90° to 180° − +
III 180° to 270° − −
IV 270° to 360° + −

Adding vectors by components

To find R = A + B:

  1. Resolve each vector into components.
  2. Add all x components: Rₓ = Aₓ + Bₓ.
  3. Add all y components: R_y = A_y + B_y.
  4. Combine: R = √(Rₓ² + R_y²) and θ = tan⁻¹(R_y / Rₓ), checking the quadrant from the signs.

Example: A = 10 m at 0° and B = 6 m at 90°. Then Rₓ = 10, R_y = 6, R = √136 ≈ 11.66 m, θ = tan⁻¹(0.6) ≈ 31.0°.

Add by components

Resolve each vector
Add x with x, y with y
1 / 2
Python Vector adder

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The function uses atan2, which handles all four quadrants correctly. The plain tan⁻¹(y/x) of a calculator returns an angle in the wrong half-plane when x is negative.

Unit vectors

A unit vector has magnitude 1 and marks a direction. We write î for +x and ĵ for +y. Then any 2D vector can be written A = Aₓ î + A_y ĵ. Example: 3 î + 4 ĵ has magnitude 5. Components make subtraction easy too: A − B = (Aₓ − Bₓ) î + (A_y − B_y) ĵ.

Choosing axes cleverly

The axes are yours to choose. On a ramp, it is often easier to align x with the slope. The physics does not change, only the numbers you write down. You will use this when we study forces on inclined planes.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A vector of 10 N points 60° above the +x axis. What is its y component?

    A_y = 10 sin 60° ≈ 8.66 N.
  2. 2. Vector A has components (3, -4). What is its magnitude?

    √(3² + 4²) = 5, the sign does not matter for magnitude.
  3. 3. Why is atan2(y, x) preferred over atan(y/x) in code?

    atan2 uses the signs of both x and y to place the angle in the right quadrant.
  4. 4. To add vectors by components you add

    Components along the same axis add as ordinary numbers.

Summary

  • Components: Aₓ = A cos θ and A_y = A sin θ when θ is from the +x axis.
  • Magnitude A = √(Aₓ² + A_y²); angle θ = tan⁻¹(A_y / Aₓ) with the right quadrant.
  • Add vectors by adding their components separately.
  • Unit vectors î and ĵ write vectors compactly.

Next: Position, Distance and Displacement