Skip to content
Tutorials Center
My learning

Topics

Lesson 26 of 39 · Work, Energy and Power

Kinetic and Potential Energy

Understand kinetic energy, gravitational potential energy and elastic spring energy, with the formulas, units, worked examples and Python tables to explore them.

Energy is the capacity to do work, or put another way, a measure of how much change a system can produce. It comes in many forms, but in mechanics two families matter most: energy of motion (kinetic) and stored energy of position or shape (potential). Energy is measured in joules, the same unit as work.

Kinetic energy

Any moving object has kinetic energy:

KE = ½ m v²

Take the speed, square it, multiply by the mass and halve. Because of the square, speed matters more than mass. A 1,200 kg car at 20 m/s has KE = ½ × 1200 × 400 = 240,000 J. At 40 m/s, the same car has 960,000 J, four times as much.

Kinetic energy is never negative and does not depend on direction. A car at +20 m/s and one at −20 m/s have the same KE.

Python Kinetic energy table

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Gravitational potential energy

Lifting an object stores energy in the Earth-object system. Near Earth's surface, with height h measured from a chosen reference level:

PE_g = m g h

For a 2 kg book on a shelf 1.5 m above the floor, PE = 2 × 9.81 × 1.5 = 29.4 J relative to the floor. Relative to a table 0.75 m high, it is 14.7 J.

Only changes in potential energy have physical meaning, so you may choose the zero level wherever it is convenient (often the lowest point in the problem). The result for a change, ΔPE = m g Δh, does not depend on that choice.

This formula holds when g is nearly constant, which is true for heights small compared with Earth's radius. For large heights, a better formula comes in the gravitation lesson.

Conservative forces

Gravity is a conservative force: the work it does between two points does not depend on the path taken, and work done against it can be fully recovered. This is why we can define a potential energy for gravity. Friction is non-conservative: sliding a box around a long path costs more work than sliding it along a short path, and the energy turns into thermal energy rather than being stored as position energy.

Elastic potential energy

A stretched or compressed spring stores energy. By Hooke's law the spring force is F = −k x, where x is the displacement from the relaxed length and k is the spring constant (N/m), a measure of stiffness. Using the area under the force graph (see the work lesson), the stored energy is:

PE_s = ½ k x²

A spring with k = 200 N/m compressed by 0.10 m stores ½ × 200 × 0.01 = 1.0 J. Compressed by 0.20 m, it stores 4.0 J. Doubling the compression quadruples the energy.

Python Spring energy and launch speed

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Here the launch speed assumes all the stored energy becomes kinetic energy of the ball, with no friction. We say this is an idealized calculation.

Putting it together: lifting and dropping

Lifting a 5 kg box by 2 m at steady speed: you do W = m g h = 5 × 9.81 × 2 = 98.1 J of work (the net work is zero, since the box does not speed up, but you do positive work and gravity does equal negative work). That energy is stored as PE. If the box falls, the stored energy turns into kinetic energy.

flowchart LR
    A["Work done lifting"] --> B["Gravitational PE stored"]
    B --> C["Box falls"]
    C --> D["PE converts to KE"]

Energy is stored while lifting and released when falling.

A table of the main forms

Energy Formula When it is large
Kinetic ½ m v² Fast, massive objects
Gravitational potential m g h High, massive objects
Elastic potential ½ k x² Stiff springs, big stretch

Do not confuse energy with force or power. Energy (J) is an amount; power (W) is the rate at which energy is transferred. A 60 W bulb transfers 60 joules each second.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A 2 kg object moves at 3 m/s. What is its kinetic energy?

    KE = ½ × 2 × 3² = 9 J.
  2. 2. A 2 kg book sits 1.5 m above the floor. Its gravitational potential energy relative to the floor is about...

    PE = m g h = 2 × 9.81 × 1.5 = 29.4 J.
  3. 3. A spring is compressed twice as far. How does the stored energy change?

    PE = ½ k x² grows with x², so doubling x multiplies the energy by four.
  4. 4. Which force is non-conservative?

    Friction's work depends on path length and turns energy into thermal energy, so no potential energy can be defined for it.

Summary

  • Kinetic energy ½ m v² depends on the square of the speed.
  • Gravitational potential energy near Earth is m g h; only changes matter.
  • Spring energy is ½ k x² (Hooke's law F = −k x).
  • Conservative forces (gravity, springs) have potential energies; friction does not.
  • Energy and work share the same unit, the joule.

Next: Conservation of Energy