Skip to content
Tutorials Center
My learning

Topics

Lesson 29 of 39 · Momentum and Collisions

Momentum and Impulse

Learn linear momentum p = mv, impulse J = FΔt and the impulse-momentum theorem, with worked examples on bats, airbags and crumple zones plus Python.

A tennis ball and a truck can both travel at 10 m/s, but you would rather catch the ball. What makes the truck harder to stop is its much larger momentum. Momentum combines mass and velocity into one quantity, and it turns out to be one of the most useful ideas in physics, especially for collisions and explosions.

Linear momentum

The momentum of an object is its mass times its velocity:

p = m · v

It is a vector pointing the way the object moves. The SI unit is kg·m/s (there is no special name). A 1,000 kg car at 20 m/s east has p = 20,000 kg·m/s east. A 0.15 kg ball at 20 m/s has just 3 kg·m/s.

Compare momentum with kinetic energy: p = mv grows linearly with speed and has a direction, whereas KE = ½mv² grows with the square and is a scalar. In one dimension, give the direction a sign: east positive, west negative.

Newton's second law in terms of momentum

Newton originally wrote the second law as "force equals the rate of change of momentum":

F_net = Δp / Δt

For constant mass, Δp = m Δv, so this gives F = m a, the same law. The momentum version is more general (it also works when mass changes, as in a rocket) and is the natural form for short, violent interactions.

Impulse

Rearranging gives:

F_net · Δt = Δp

The left side is called impulse, J = F Δt, with units N·s (equal to kg·m/s). The impulse-momentum theorem states: the impulse of the net force on an object equals its change in momentum.

J = F Δt = Δp = m v_final − m v_initial

For a force that varies in time, the impulse is the area under the force-time graph.

Example 1: stopping a ball

A 0.15 kg ball moving at 20 m/s is caught and brought to rest in 0.010 s. Taking the original direction as positive: Δp = 0 − 0.15 × 20 = −3.0 kg·m/s. Average force on the ball: F = Δp/Δt = −3.0 / 0.010 = −300 N. The negative sign means the force opposes the motion. By the third law, the ball pushes on the hand with 300 N.

Catch the same ball while pulling your hand back so that it stops in 0.10 s, and the average force drops to 30 N. The same change of momentum with ten times the time gives one tenth the force.

Python Same impulse, different forces

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Safety designs

Because F = Δp/Δt, you reduce the force in a crash by increasing the time over which momentum changes.

  • Airbags and seat belts stretch out the stopping time of the occupant.
  • Crumple zones let the front of a car deform, lengthening the time of the collision.
  • Gymnasts, long-jumpers and parachutists bend their knees when landing.
  • Boxers "roll with the punch"; catchers move their glove back.

Conversely, a karate expert breaking a board wants a very short contact time, to produce a very large force for the same impulse.

Impulse depends on both force and time. A small force acting for a long time can give the same impulse as a large force acting for a short time.

A varying force

In real impacts the force rises quickly to a peak and falls again. You can still find the impulse by integrating (adding up) the force over time. If you know a few force readings at equal time steps, use the trapezoid rule.

Example 2. A bat hits a 0.145 kg baseball. Suppose the force rises and falls with a triangular profile peaking at 8,000 N over 0.0020 s. The area is ½ × 0.0020 × 8000 = 8.0 N·s. The ball's change of momentum is 8.0 kg·m/s, so its speed change is 8.0 / 0.145 ≈ 55 m/s (in an idealized, one-dimensional case).

Python Impulse as area under a force-time graph

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

flowchart LR
    A["Net force F"] --> B["Acts for time dt"]
    B --> C["Impulse J = F dt"]
    C --> D["Changes momentum: dp = J"]

The impulse-momentum link.

Momentum is a vector

Remember directions. A 0.5 kg ball hits a wall at 6 m/s and bounces back at 4 m/s. Taking the initial direction as positive: Δp = 0.5 × (−4) − 0.5 × (+6) = −2 − 3 = −5 kg·m/s. The change is larger than for stopping alone (−3). A bounce takes more impulse than a stop.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What is the momentum of a 1,000 kg car moving at 20 m/s?

    p = m v = 1000 × 20 = 20,000 kg·m/s.
  2. 2. Why does an airbag reduce injuries?

    The momentum change is fixed by the crash, so a longer time gives a smaller average force (F = Δp/Δt).
  3. 3. A 0.5 kg ball hits a wall at 6 m/s and rebounds at 4 m/s. The magnitude of its momentum change is...

    Δp = 0.5 × (−4) − 0.5 × 6 = −5 kg·m/s, magnitude 5. The directions are opposite, so the magnitudes add.
  4. 4. Which unit is equivalent to N·s?

    1 N·s = 1 (kg·m/s²)·s = 1 kg·m/s, the unit of momentum.

Summary

  • Momentum p = m v is a vector in kg·m/s.
  • F_net = Δp/Δt is the general form of the second law.
  • Impulse J = F Δt = Δp; for varying force it is the area under the F-t graph.
  • A longer stopping time means a smaller average force.
  • Reversing direction needs a bigger impulse than just stopping.

Next: Conservation of Momentum