Skip to content
Tutorials Center
My learning

Topics

Lesson 21 of 37 · Thermodynamics

Thermodynamic Processes: Isothermal, Isobaric, Isochoric, Adiabatic

Understand the four basic gas processes, how to read a pressure-volume diagram, and how to calculate work, heat and internal energy with Python plots.

A gas can change from one state to another in many ways. Physicists study four simple paths because they are easy to calculate and because real engines are built from them. Each one holds a different quantity fixed: temperature, pressure, volume, or heat exchange.

To compare them we use a PV diagram, a graph of pressure (vertical axis) against volume (horizontal axis). The area under the curve equals the work done by the gas. Moving right (expansion) means positive work; moving left (compression) means negative work.

The four processes

Process What stays constant Work done by gas First law result
Isochoric volume V W = 0 Q = ΔU
Isobaric pressure P W = PΔV Q = ΔU + PΔV
Isothermal temperature T W = nRT ln(V₂/V₁) ΔU = 0, so Q = W
Adiabatic heat Q (Q = 0) W = −ΔU ΔU = −W

Isochoric (constant volume)

On a PV diagram this is a vertical line. Nothing moves, so no work is done. All heat changes the temperature: Q = n·Cv·ΔT, where for a monatomic ideal gas Cv = (3/2)R.

Isobaric (constant pressure)

This is a horizontal line. The work is a rectangle: W = PΔV. The heat needed is Q = n·Cp·ΔT, with Cp = Cv + R. For a monatomic gas, Cp = (5/2)R. More heat is needed than at constant volume, because part of it escapes as work.

Isothermal (constant temperature)

The curve follows PV = constant (Boyle's law). An ideal gas has ΔU = 0, so all absorbed heat turns into work. The work is:

Text
W = nRT ln(V₂ / V₁)

where ln is the natural logarithm. It happens slowly, with the gas in thermal contact with a large reservoir.

Adiabatic (no heat exchange)

This occurs when a gas expands or is compressed quickly, or is well insulated. Because Q = 0, the work comes at the expense of internal energy, so an expanding gas cools. The curve is steeper than an isotherm and follows:

Text
P V^γ = constant        where γ = Cp / Cv
T V^(γ−1) = constant

For a monatomic gas, γ = 5/3. For a diatomic gas at room temperature, γ = 7/5 = 1.4.

Worked example: one mole expanding

One mole of monatomic ideal gas at 300 K expands from 10 L to 20 L. Compare isothermal and adiabatic expansion.

Isothermal:

Text
W = nRT ln(V₂/V₁) = (1)(8.314)(300)(ln 2) ≈ 1729 J

Heat absorbed: also about 1729 J.

Adiabatic: use T V^(γ−1) constant with γ − 1 = 2/3.

Text
T₂ = 300 × (10/20)^(2/3) ≈ 189 K
W = −ΔU = (3/2)(1)(8.314)(300 − 189) ≈ 1385 J

The adiabatic gas does less work, because it cools while it expands.

Python Compare isothermal and adiabatic work

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Plotting the paths

The next program draws the PV curves for the same starting state (300 K, 10 L). Notice how the adiabatic curve falls below the isotherm.

Python PV diagram of three expansions

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Reading a cycle

When several processes join to form a closed loop, the net work is the area enclosed by the loop. A clockwise loop gives positive net work (an engine); an anticlockwise loop gives negative net work (a refrigerator or heat pump). Over the loop ΔU = 0, so the net heat equals the net work. The next lesson, Heat Engines and Efficiency, builds on this idea. If any sign rule feels shaky, revisit The First Law of Thermodynamics.

To remember the order of steepness: on a PV diagram going down from the same point, the adiabat is steeper than the isotherm, because the gas also cools as it expands.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. In which process is the work done by the gas zero?

    Work is PΔV. At constant volume ΔV = 0, so no work is done.
  2. 2. A monatomic ideal gas expands adiabatically. What happens to its temperature?

    Q = 0, so W = −ΔU. The gas does positive work, so ΔU is negative and the temperature falls.
  3. 3. A gas expands isothermally and does 500 J of work. How much heat did it absorb?

    For an ideal gas ΔU = 0 at constant temperature, so Q = W = 500 J.
  4. 4. What does the area under a curve on a PV diagram represent?

    Because W = ∫P dV, the area under the curve is the work. It is positive for expansion and negative for compression.

Summary

  • Isochoric: constant V, W = 0. Isobaric: constant P, W = PΔV.
  • Isothermal: constant T, ΔU = 0, W = nRT ln(V₂/V₁), so Q = W.
  • Adiabatic: Q = 0, PV^γ = constant; an expanding gas cools.
  • Work equals the area under a PV curve; a closed loop's net work is its enclosed area.

Next: Heat Engines and Efficiency