Skip to content
Tutorials Center
My learning

Topics

Lesson 12 of 37 · Thermal Properties of Matter

Heating Curves

Read and build a heating curve, with sloping and flat sections, and calculate the total energy to turn ice into steam in stages.

A heating curve plots temperature against the energy added (or against time for a steady heater). It tells the whole story of a substance's thermal behavior in one picture: sloping sections where the temperature rises, and flat sections where the state changes.

Reading a heating curve

Imagine 1 kg of ice starting at −20 °C and heated steadily until it becomes steam above 100 °C. There are five stages:

  1. Warming ice, from −20 °C to 0 °C: Q₁ = m c_ice ΔT
  2. Melting, at 0 °C: Q₂ = m L_f
  3. Warming water, 0 °C to 100 °C: Q₃ = m c_water ΔT
  4. Boiling, at 100 °C: Q₄ = m L_v
  5. Warming steam, above 100 °C: Q₅ = m c_steam ΔT

Sloping sections use Q = m c ΔT. Flat sections use Q = m L.

Use these approximate values: c_ice = 2100, c_water = 4186, c_steam = 2000 J/(kg·K); L_f = 334,000 J/kg; L_v = 2,260,000 J/kg.

Python Energy for each stage

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Notice how much of the total goes into boiling. The flat sections are long on the graph because they need a lot of energy.

Python Plot the heating curve

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Why the slopes differ

On a graph of temperature against energy, the slope is ΔT / Q = 1 / (m c). A larger specific heat capacity gives a shallower slope. Water is shallower than ice or steam: liquid water needs about twice as much energy per degree as ice or steam.

If the graph is against time with a steady heater of power P, then Q = P t, so the shape is the same with the horizontal axis rescaled. A 1 kW heater needs about 3.09 × 10⁶ J / 1000 W ≈ 3,100 s (just under an hour) to do all five stages, if no energy is lost.

Cooling curves

Reversing the process gives a cooling curve: steam condenses, water cools, and so on. A pure substance holds a constant temperature during freezing. Mixtures and impure substances, such as salt water, freeze and melt over a range of temperatures, so their curves have gentler plateaus.

flowchart LR
  A["Ice<br/>(sloping)"] --> B["Melting<br/>(flat at 0 C)"]
  B --> C["Water<br/>(sloping)"]
  C --> D["Boiling<br/>(flat at 100 C)"]
  D --> E["Steam<br/>(sloping)"]

Sloping parts: temperature changes. Flat parts: the state changes.

A common exam type of problem

How much energy is needed to turn 0.200 kg of ice at −10 °C into water at 25 °C?

  • Warm ice: 0.200 × 2100 × 10 = 4,200 J
  • Melt: 0.200 × 334,000 = 66,800 J
  • Warm water: 0.200 × 4186 × 25 = 20,930 J
  • Total: 4,200 + 66,800 + 20,930 = 91,930 J ≈ 92 kJ

Notice melting is the biggest piece.

Python General heating-path solver

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Always check the order of stages. If the ice starts at −10 °C, you must warm it to 0 °C before any melting can start.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. On a heating curve, a flat section means

    Energy goes into changing the state, so the temperature stays constant.
  2. 2. Which stage needs the most energy for 1 kg of water?

    Boiling needs about 2260 kJ, more than warming (418.6 kJ) or melting (334 kJ).
  3. 3. The slope of temperature against energy for a sloping section equals

    From Q = m c ΔT we get ΔT/Q = 1/(m c).
  4. 4. Energy to melt 0.30 kg of ice at 0 °C and warm the water to 10 °C is about (L_f = 334 kJ/kg, c = 4186 J/(kg·K))

    Melting: 0.30 × 334 = 100.2 kJ. Warming: 0.30 × 4.186 × 10 ≈ 12.6 kJ. Total about 112.8 kJ.

Summary

  • Heating curves have sloping sections (Q = m c ΔT) and flat sections (Q = m L).
  • A larger specific heat gives a shallower slope.
  • For water, boiling needs by far the most energy per stage.
  • Work through the stages in order, one formula at a time.

Next: Conduction