Skip to content
Tutorials Center
My learning

Topics

Lesson 7 of 37 · Temperature and Heat

Heat and Internal Energy

Understand the difference between heat, temperature and internal energy, and how energy is transferred by heating and by doing work.

People say "close the door, you are letting the heat out", and "this soup has a lot of heat". In physics the words are used more carefully. This lesson separates three ideas that are easy to mix up: temperature, internal energy and heat.

Internal energy

Every object is made of particles that move and interact. The internal energy U of an object is the total energy of all its particles: the random kinetic energy of their motion, plus the potential energy stored in the forces between them.

  • Raising the temperature increases the kinetic part.
  • Melting or boiling changes the potential part (particles move apart against attractive forces) without changing temperature.

Internal energy depends on how much material you have. Two liters of water at 60 °C hold twice the internal energy of one liter at 60 °C, though both are at the same temperature.

Heat

Heat Q is energy transferred between objects because of a temperature difference. It is a process, not something stored inside an object. We say an object gains or loses heat, and we measure it in joules. (The old unit, the calorie, is about 4.184 J.)

So a cup of tea does not "contain heat"; it has internal energy. When it is placed in a cooler room, heat flows out of the tea.

Quantity Meaning Unit
Temperature T Average random kinetic energy per particle K or °C
Internal energy U Total microscopic energy J
Heat Q Energy transferred due to a temperature difference J

Two ways to change internal energy

You can raise the internal energy of a system in two ways:

  1. Heating: a temperature difference transfers energy (a flame under a pan).
  2. Doing work: a force moves something and transfers energy (rubbing hands, pumping a tire, stirring a liquid).

The first law of thermodynamics combines them: ΔU = Q + W_on, where Q is the heat added to the system and W_on is the work done on it. We study it fully in the thermodynamics chapter; here, remember that heating and working both change internal energy.

flowchart LR
  Q["Heat in (Q)"] --> U["Internal energy U"]
  W["Work done on the system"] --> U
  U --> T["Temperature may rise"]
  U --> P["Or state may change (melting, boiling)"]

Heat and work are two routes for energy into a system; the result is a change in internal energy.

Joule's paddle wheel idea

In the 1840s James Prescott Joule showed that doing a measured amount of mechanical work to stir water raised its temperature by a predictable amount. This established that heat and work are both forms of energy transfer, and that there is an exchange rate between mechanical energy and thermal energy, which today we simply express by measuring both in joules.

The next example estimates a dramatic case: a falling object whose motion energy ends up in water.

Python Energy from falling to warming

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Real experiments lose some energy to the surroundings, so the idealized value is an upper limit. Notice that even 50 drops of 20 kg weights only warm half a liter of water by roughly nine degrees. Water takes a lot of energy to heat; the next lesson explains why.

Thermal energy flows from hot to cold

Heat flows spontaneously from a hot object to a cold one, never the other way, until they reach thermal equilibrium. Later, the second law of thermodynamics will explain why this direction is special.

Python Two blocks reaching equilibrium

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

This is a toy model, not a measured cooling curve, but it shows the general shape: fast change at first, slower as the temperatures approach each other.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Heat is best described as

    Heat is energy in transit due to a temperature difference.
  2. 2. Two liters of water and one liter of water are both at 50 °C. Which has more internal energy?

    Same temperature, twice the particles, so twice the internal energy.
  3. 3. Which is a way to raise a gas's internal energy without heating it?

    Work done on a system increases its internal energy, which is why a pumped tire warms up.
  4. 4. During melting at constant temperature, the added energy mostly increases

    Particles break away from fixed positions, increasing the potential energy while the temperature stays the same.

Summary

  • Internal energy is the total kinetic plus potential energy of the particles.
  • Heat is energy transferred because of a temperature difference; it is measured in joules.
  • Heating and doing work both change internal energy (first law).
  • Heat flows from hotter to colder objects until equilibrium.

Next: Specific Heat Capacity