Skip to content
Tutorials Center
My learning

Topics

Lesson 24 of 37 · Atomic Structure and Quantum Ideas

The Photoelectric Effect and Photons

Learn how light knocks electrons out of metals, why it showed that light comes in photons, and how to use E = hf and Einstein's equation with Python.

Shine ultraviolet light on a clean zinc plate and electrons escape from the metal. Shine red light, however bright, and nothing happens. This puzzle, called the photoelectric effect, could not be explained by the wave theory of light. In 1905 Albert Einstein solved it by proposing that light arrives in small packets of energy called photons. The idea started quantum physics and later earned him the 1921 Nobel Prize in Physics.

What the experiments show

When light of a suitable frequency hits a metal surface, electrons (called photoelectrons) are emitted. The observations were:

  1. Below a certain threshold frequency f₀, no electrons are emitted, however intense the light and however long you wait.
  2. Above f₀, emission is almost instant (no measurable delay).
  3. The maximum kinetic energy of the electrons grows with frequency but does not depend on intensity.
  4. Increasing intensity increases the number of electrons per second (the current), not their energy.

Wave theory predicted that a brighter wave should always eventually free electrons and give them more energy. That is not what happens.

The photon model

Einstein proposed that light of frequency f consists of photons, each with energy:

Text
E = h f = h c / λ

where h = 6.626 × 10⁻³⁴ J·s is the Planck constant, c = 3.00 × 10⁸ m/s is the speed of light and λ is the wavelength. One photon gives all its energy to one electron, in an all-or-nothing event.

A useful shortcut: h c ≈ 1240 eV·nm. So a photon of wavelength 400 nm carries 1240 / 400 ≈ 3.1 eV. The electronvolt (eV) is the energy gained by an electron crossing a potential difference of 1 V: 1 eV = 1.602 × 10⁻¹⁹ J.

Einstein's photoelectric equation

Electrons are held in the metal. The minimum energy needed to free one is the work function φ (phi), a property of the metal. Energy conservation gives:

Text
h f = φ + K_max

so the maximum kinetic energy is:

Text
K_max = h f − φ

Electrons deeper inside lose extra energy on the way out, so their kinetic energy is lower; K_max belongs to those emitted right at the surface. The threshold frequency is when K_max = 0:

Text
f₀ = φ / h

Stopping potential

If you place a reverse voltage across the tube, you can stop even the fastest electrons. The stopping potential V_s satisfies:

Text
e V_s = K_max

Worked example

A metal has a work function of 2.0 eV. Light of wavelength 400 nm falls on it.

Text
E = 1240 / 400 = 3.1 eV
K_max = 3.1 − 2.0 = 1.1 eV
V_s = 1.1 V

Threshold wavelength: λ₀ = 1240 / 2.0 = 620 nm. Any light with a longer wavelength (such as red at 700 nm) cannot free electrons from this metal.

Python Photoelectric calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The graph of K_max against frequency

Plot K_max against f. Einstein's equation K_max = h f − φ has the form y = m x + c, so you get a straight line:

  • The gradient equals h, the same for every metal.
  • The x-intercept is the threshold frequency f₀.
  • The y-intercept is −φ.

Different metals give parallel lines. This was a strong test of Einstein's theory when Robert Millikan measured it carefully in the 1910s.

Python Kmax versus frequency for two metals

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

When a question gives wavelengths in nanometers and energies in eV, use E = 1240 / λ (λ in nm). Convert to joules only when the answer is needed in J.

Intensity versus frequency

Doubling the intensity doubles the number of photons arriving each second, so (above threshold) it doubles the photocurrent. Each photon still has the same energy, so K_max is unchanged. Raising the frequency gives each photon more energy and therefore raises K_max. Next, see how quantized energy also explains atomic light in Hydrogen Spectrum and the Bohr Model.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Light of frequency below the threshold frequency shines very brightly on a metal. What happens?

    Each photon has too little energy to free an electron, and electrons cannot add up the energy from several photons.
  2. 2. What does increasing the intensity of light above threshold change?

    More photons per second free more electrons per second; the energy per photon (set by frequency) is unchanged.
  3. 3. A photon has energy 5.0 eV and the work function is 3.2 eV. What is the maximum kinetic energy?

    K_max = hf − φ = 5.0 − 3.2 = 1.8 eV.
  4. 4. What does the gradient of a K_max versus f graph equal?

    K_max = hf − φ, so the gradient is h (or h/e if you plot in volts).

Summary

  • Light travels as photons with energy E = hf = hc/λ.
  • Einstein's equation: hf = φ + K_max; no emission below f₀ = φ/h.
  • Intensity changes the number of electrons, frequency changes their maximum energy.
  • eV_s = K_max, and a K_max-f graph is a straight line with gradient h.

Next: Hydrogen Spectrum and the Bohr Model