Skip to content
Tutorials Center
My learning

Topics

Lesson 13 of 37 · Thermal Properties of Matter

Conduction

Learn how heat flows through solids by conduction, use P = kAΔT/d to calculate heat flow, and compare conductors with insulators.

There are three ways heat travels: conduction, convection and radiation. This lesson covers the first, which is how heat moves through solids and still fluids: the end of a metal spoon warms in hot soup because energy passes along it.

How conduction works

In a solid, the hot end has atoms vibrating more strongly. These vibrations pass to neighbors through the bonds, so energy spreads toward the cold end. In metals there is a second, faster way: free electrons carry energy through the metal quickly. That is why metals are good thermal conductors, and also good electrical conductors.

Materials with few free electrons (wood, plastic, wool, air) are poor conductors, called insulators. Gases conduct especially poorly, because the molecules are far apart. Trapped air (in fleece, foam or double glazing) makes excellent insulation, as long as it cannot circulate.

The rate of heat flow

For a slab of thickness d and area A with a temperature difference ΔT between its faces, the heat per second (the power P) is:

P = k A ΔT / d

  • P is the rate of heat transfer in watts (W)
  • k is the thermal conductivity, in W/(m·K)
  • A is the cross-sectional area (m²)
  • ΔT is the temperature difference across the slab (K)
  • d is the thickness (m)
Material k in W/(m·K), approximate
Copper 400
Aluminium 235
Steel 50
Window glass 1.0
Water 0.6
Wood 0.1 to 0.2
Foam insulation 0.03
Air (still) 0.026

Worked example. A window pane of area 1.5 m² and thickness 4.0 mm has 15 K between its faces. With k ≈ 1.0 W/(m·K):

P = 1.0 × 1.5 × 15 / 0.004 = 5,625 W.

Real windows lose less, because the layers of air near the glass resist heat flow, and double glazing traps air between two panes. The formula shows the conduction through the glass alone, assuming those temperatures are really the faces' temperatures.

Python Conduction calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The numbers differ by a factor of over 10,000 between copper and still air. That is why we build kettles from metal and coolers from foam.

Why metal feels colder than wood

A metal spoon and a wooden spoon are at the same room temperature. Yet metal feels colder, because it conducts heat away from your hand much faster. Your nerves sense the rate of heat loss from the skin, not the temperature of the object.

Insulation and layers

For layers in series (a wall with brick, foam and plaster), the heat flows through each in turn. Layers with low k and large d contribute large thermal resistance. Building codes often use the R-value, which is thickness divided by conductivity; higher R-values mean better insulation. (Units and conventions of R-values differ between countries.)

Python Two layers in series

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Almost all of the temperature drop happens across the foam: the better insulator takes up most of the difference.

The formula assumes steady state: temperatures are not changing with time. When objects are still warming up, the problem is harder and needs calculus or numerical simulation.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Metals are good thermal conductors mainly because

    Free electrons move through the metal and carry thermal energy in addition to atomic vibrations.
  2. 2. If the thickness of a slab doubles (same A, ΔT and material), the heat flow rate

    P is proportional to 1/d, so doubling d halves P.
  3. 3. A slab has k = 0.5 W/(m·K), A = 2.0 m², d = 0.10 m and ΔT = 10 K. What is P?

    P = 0.5 × 2.0 × 10 / 0.10 = 100 W.
  4. 4. Why is trapped air a good insulator?

    Air has very low thermal conductivity and, when trapped, does not carry energy by convection either.

Summary

  • Conduction transfers energy through particle vibrations and, in metals, free electrons.
  • P = k A ΔT / d: larger k, area and ΔT mean more flow, greater thickness means less.
  • Metals conduct well; trapped air and foam insulate well.
  • Metal feels cold because it removes heat from your skin quickly.

Next: Convection and Radiation