Skip to content
Tutorials Center
My learning

Topics

Lesson 15 of 37 · Gases and Kinetic Theory

Gas Pressure and the Particle Model

Learn what pressure is, how moving molecules create the pressure of a gas, and how atmospheric pressure is measured with barometers.

A balloon stays round because the gas inside pushes outward on the rubber in every direction. This push per unit area is pressure. In this lesson you will define pressure, see how it comes from molecular collisions, and learn what changes it.

Pressure

Pressure is the force acting perpendicular to a surface, divided by the area of that surface:

p = F / A

The unit is the pascal: 1 Pa = 1 N/m². Pascals are small, so we often use kilopascals (kPa) and other units:

Unit Value in pascals
1 standard atmosphere (atm) 101,325 Pa
1 bar 100,000 Pa
1 mm of mercury (mmHg) about 133.3 Pa

Worked example. A 60 kg person standing on both feet, total contact area 0.040 m², exerts p = F/A = (60 × 9.81)/0.040 ≈ 14,700 Pa, about 15 kPa. Standing on one foot doubles it. Snowshoes work by increasing the area.

Atmospheric pressure

The air above us has weight. At sea level, the atmosphere presses on every square meter with about 101,000 N. We do not feel it because the fluids inside our bodies push outward with the same pressure.

A mercury barometer measures it. A tube sealed at the top and filled with mercury is inverted in a dish. The mercury column falls until its weight per unit area balances the atmosphere's push. The pressure at the bottom of a fluid column is:

p = ρ g h

For mercury (ρ ≈ 13,595 kg/m³), a standard atmosphere supports h = p/(ρ g) = 101,325 / (13,595 × 9.81) ≈ 0.760 m = 760 mm.

Python Pressure calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

A water barometer would need a column over 10 m tall. This is why mercury, which is 13.6 times denser than water, is used. Every 10 m of water adds roughly one more atmosphere.

The particle model of a gas

The particle model (or kinetic model) of a gas says:

  • A gas is made of a huge number of tiny molecules, far apart compared with their size.
  • The molecules move randomly and constantly, in straight lines between collisions.
  • Collisions with each other and with the walls are elastic (no kinetic energy is lost on average).
  • The forces between molecules are negligible except during collisions.

Gas pressure comes from molecules hitting the walls. Each collision gives the wall a tiny push (the molecule's momentum reverses). Trillions of collisions per second add up to a steady force.

flowchart LR
  A["Molecules move randomly"] --> B["Collide with the wall"]
  B --> C["Each collision gives a tiny push"]
  C --> D["Huge number of pushes = steady pressure"]

Pressure is the average effect of countless tiny collisions.

What increases pressure?

Using the particle model:

  • More molecules in the same volume means more collisions per second, so the pressure rises.
  • A higher temperature means faster molecules: they hit harder and more often.
  • A smaller volume means molecules reach the walls more often.

This explains why pumping a bicycle tire raises its pressure (more molecules), why a sealed can can burst if it is heated (faster molecules), and why squeezing a syringe with your finger over the end raises its pressure (smaller volume).

Python A box of random molecules (simulation)

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Each molecule's contribution is random, but the average over many molecules settles near the expected value. This is why a gas gives a very steady pressure even though the molecules behave randomly.

Pressure acts equally in all directions at a point in a fluid, and always perpendicular to a surface. That is why a balloon's rubber is pushed outward everywhere.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A force of 200 N acts on an area of 0.50 m². The pressure is

    p = F/A = 200 / 0.50 = 400 Pa.
  2. 2. According to the particle model, gas pressure is caused by

    Collisions with the container walls give momentum changes that appear as a steady force per area.
  3. 3. Heating a gas in a rigid sealed container raises the pressure because

    Higher temperature means higher average speed, so collisions are more forceful and more frequent.
  4. 4. Why is mercury used in barometers rather than water?

    Mercury's high density means a standard atmosphere needs only about 0.76 m, not over 10 m.

Summary

  • Pressure is force per area: p = F/A, in pascals; 1 atm = 101,325 Pa.
  • Fluid pressure from depth: p = ρ g h.
  • The particle model explains gas pressure as the sum of many molecular collisions with the walls.
  • More molecules, higher temperature or smaller volume all raise the pressure.

Next: Boyle's, Charles's and Gay-Lussac's Laws