Skip to content
Tutorials Center
My learning

Topics

Lesson 11 of 37 · Thermal Properties of Matter

Changes of State and Latent Heat

Learn why temperature stays constant while ice melts or water boils, and use Q = mL to calculate the energy for changes of state.

Put a thermometer in a pan of boiling water and keep the stove on high. The reading stays at 100 °C (at standard pressure), even though energy is pouring in. Where does the energy go? It goes into changing the state of the water from liquid to gas.

States of matter

State Particle arrangement Particle motion
Solid Fixed, close together Vibrate about fixed positions
Liquid Close together, not fixed Slide past each other
Gas Far apart Move freely, fast

Changes of state have names: melting (solid to liquid), freezing (liquid to solid), boiling/evaporation (liquid to gas), condensation (gas to liquid), sublimation (solid directly to gas).

Latent heat

During a change of state, added energy does not raise the temperature. It increases the potential energy of the particles as they break free of their attractive forces. The energy per kilogram needed for the change is the specific latent heat L:

Q = m L

  • Latent heat of fusion L_f: melting or freezing.
  • Latent heat of vaporization L_v: boiling or condensing.
Substance (approximate) L_f (kJ/kg) L_v (kJ/kg)
Water 334 2260

For water, boiling takes about 6.8 times as much energy per kilogram as melting. This is because turning a liquid into gas requires pulling the molecules completely apart.

Worked example 1. Melt 0.50 kg of ice already at 0 °C: Q = 0.50 × 334,000 = 167,000 J.

Worked example 2. Boil away 0.50 kg of water at 100 °C: Q = 0.50 × 2,260,000 = 1,130,000 J.

Python Latent heat calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Why steam burns are severe

When steam at 100 °C condenses on your skin, it releases the latent heat 2260 kJ/kg and then cools as liquid water. Steam at 100 °C carries far more energy than boiling water at 100 °C, so burns from steam are more serious.

Cooling by evaporation

The fastest molecules in a liquid escape from its surface. Because the faster-than-average ones leave, the remaining liquid has a lower average kinetic energy, so it cools. This is why sweating cools the body, and why a wet cloth feels cold in the wind.

Evaporation happens at any temperature, only at the surface. Boiling happens at one temperature (for a given pressure), throughout the liquid, when vapor bubbles can form.

Boiling point and pressure

A liquid boils when its vapor pressure equals the external pressure. At lower pressure, the boiling point drops. On a high mountain, where air pressure is lower, water boils below 100 °C, which is why food takes longer to cook there. A pressure cooker raises the pressure and so raises the boiling point.

flowchart LR
  S["Solid"] -->|"melting (absorbs L_f)"| L["Liquid"]
  L -->|"boiling (absorbs L_v)"| G["Gas"]
  G -->|"condensing (releases L_v)"| L
  L -->|"freezing (releases L_f)"| S

Changes of state toward the right absorb energy; changes toward the left release it.

Mixing with a change of state

Combine latent heat with the heat-balance idea from calorimetry. How much ice at 0 °C can 0.40 kg of water at 30 °C melt before reaching 0 °C? The water gives 0.40 × 4186 × 30 = 50,232 J. Melting a mass m takes 334,000 m, so m = 50,232 / 334,000 ≈ 0.15 kg.

Python Ice in a drink

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. While ice at 0 °C is melting, adding energy

    The energy increases the potential energy of the particles; temperature stays at the melting point.
  2. 2. How much energy melts 2.0 kg of ice at 0 °C? (L_f = 334 kJ/kg)

    Q = 2.0 × 334 = 668 kJ.
  3. 3. Why does sweating cool you?

    Evaporation removes high-energy molecules and takes the latent heat from the skin.
  4. 4. Water boils at a lower temperature on a mountain because

    Boiling occurs when vapor pressure equals external pressure; lower external pressure means a lower boiling point.

Summary

  • During a change of state, temperature stays constant while energy changes the particle potential energy.
  • Q = m L, with L_f for melting and L_v for boiling; for water about 334 kJ/kg and 2260 kJ/kg.
  • Evaporation cools the remaining liquid.
  • Boiling point depends on external pressure.

Next: Heating Curves