Skip to content
Tutorials Center
My learning

Topics

Lesson 10 of 37 · Thermal Properties of Matter

Thermal Expansion

Calculate how much solids and liquids expand when heated, see why bridges have gaps, and learn why water behaves oddly near 4 degrees Celsius.

Most materials get bigger when they get hotter. Railway tracks lengthen on a summer day, a metal lid loosens when you run it under hot water, and the liquid in a thermometer rises. This is thermal expansion, and engineers must plan for it.

Why things expand

Atoms in a solid are held by forces that act like tiny springs, but the springs are not perfectly symmetric: it is easier to pull atoms apart than to push them together. When atoms vibrate more strongly (higher temperature), their average separation grows slightly. Multiplied over billions of atoms, the whole object expands.

Linear expansion

For a solid rod, the change in length is proportional to the original length and to the temperature change:

ΔL = α L₀ ΔT

  • ΔL is the change in length (m)
  • α is the coefficient of linear expansion (K⁻¹, same as per °C)
  • L₀ is the original length (m)
  • ΔT is the temperature change (K)
Material α in 10⁻⁶ K⁻¹, approximate
Aluminium 23
Copper 17
Steel 12
Concrete 12
Window glass 9
Borosilicate (laboratory) glass 3.3

Worked example. A 50 m steel bridge section is built at 10 °C and reaches 35 °C. Then ΔL = 12 × 10⁻⁶ × 50 × 25 = 0.015 m = 15 mm. This is why bridges have expansion joints, gaps that let the deck grow without buckling.

Python Linear expansion calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Area and volume expansion

When a solid heats up, every dimension grows. For a small temperature change:

  • Area: ΔA ≈ 2 α A₀ ΔT
  • Volume: ΔV = β V₀ ΔT, with β ≈ 3α for an isotropic solid

For liquids we only use the volume expansion coefficient β. Liquids expand more than solids; for example β is roughly 1.8 × 10⁻⁴ K⁻¹ for mercury and about 1.1 × 10⁻³ K⁻¹ for ethanol (approximate values near room temperature).

A hole in a metal plate also gets bigger when the plate is heated, exactly as if the hole were made of the same metal. That is why a tight jar lid can be loosened with hot water: the metal lid expands more than the glass.

Bimetallic strips

Two metals with different α, bonded together, bend when the temperature changes. The metal with the larger α ends up on the outside of the curve when heated. A bimetallic strip can switch circuits on and off, as in simple thermostats and some fire alarms.

Python How much does a bimetallic strip differ?

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The strange case of water

Most liquids keep getting denser as they cool. Water does not. As it cools from room temperature, it contracts until about 4 °C, where it is densest (about 1000 kg/m³). Below that it expands slightly until it freezes, and ice is less dense than liquid water (about 917 kg/m³ for ordinary ice).

The result is that ponds freeze from the top down. The coldest water (0 °C) floats at the surface and turns to ice, while denser 4 °C water stays at the bottom, so fish can survive the winter.

Python Density of water near 4 degrees

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The curve is a made-up parabola with the correct location of the maximum; it shows the shape but not exact densities.

Water that freezes in a closed pipe expands by about 9% in volume, and can split the pipe. Insulate pipes and let taps drip in extreme cold.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A 10 m aluminium rod (α = 23 × 10⁻⁶ K⁻¹) is heated by 40 K. How much longer does it get?

    ΔL = 23 × 10⁻⁶ × 10 × 40 = 9.2 × 10⁻³ m = 9.2 mm.
  2. 2. Why do bridges have expansion joints?

    Without gaps, the expanding deck would push against itself and could buckle.
  3. 3. At what temperature is liquid water densest?

    Water reaches its maximum density at about 4 °C.
  4. 4. A hole in a metal plate, when the plate is heated, will

    The hole expands like the material around it.

Summary

  • ΔL = α L₀ ΔT for length; ΔV = β V₀ ΔT for volume, with β ≈ 3α for solids.
  • Liquids expand more than solids for the same temperature change.
  • Bimetallic strips bend because their two metals expand by different amounts.
  • Water is densest near 4 °C, so lakes freeze from the top.

Next: Changes of State and Latent Heat