Skip to content
Tutorials Center
My learning

Topics

Lesson 31 of 37 · Nuclear Physics and Radioactivity

Binding Energy, Nuclear Fission and Fusion

Learn mass defect, E = mc² and binding energy per nucleon, why fission and fusion release energy, and calculate the energy released with Python.

If you weigh a helium-4 nucleus, it is lighter than two protons and two neutrons added together. The missing mass has not vanished: it has been converted to the energy that was released when the nucleus formed, and the same amount of energy would be needed to pull it apart. This is the key to understanding nuclear power and the energy of the Sun.

Mass defect and binding energy

The mass defect Δm is the difference between the total mass of the separate nucleons and the mass of the nucleus:

Text
Δm = Z·m_p + N·m_n − m_nucleus

Einstein's relation E = mc² converts it to the binding energy E_B, the minimum energy needed to split the nucleus into free nucleons:

Text
E_B = Δm · c²

A handy conversion: 1 u corresponds to 931.5 MeV (megaelectronvolts), because 1 u = 1.6605 × 10⁻²⁷ kg and c = 3.00 × 10⁸ m/s give 1.4924 × 10⁻¹⁰ J = 931.5 MeV. (1 MeV = 1.602 × 10⁻¹³ J.)

Worked example: helium-4

Using atomic masses (which include electrons that cancel in the calculation), with hydrogen-1 1.007825 u, neutron 1.008665 u and helium-4 4.002602 u:

Text
Δm = 2(1.007825) + 2(1.008665) − 4.002602 = 0.030378 u
E_B = 0.030378 × 931.5 ≈ 28.3 MeV
Binding energy per nucleon = 28.3 / 4 ≈ 7.07 MeV
Python Binding energy calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Binding energy per nucleon

Dividing by A tells you how tightly an average nucleon is held. Plotted against A, the curve:

  • rises steeply for light nuclei (helium-4 is unusually tightly bound);
  • peaks near iron-56 and nickel-62, at about 8.8 MeV per nucleon;
  • slowly falls for heavy nuclei (about 7.6 MeV per nucleon for uranium).

More binding energy per nucleon means a more stable nucleus. Any reaction that moves nuclei toward the peak releases energy.

flowchart LR
    L["Light nuclei<br/>(low binding energy)"] -->|"Fusion"| P["Iron region<br/>(maximum binding)"]
    H["Heavy nuclei<br/>(lower binding energy)"] -->|"Fission"| P

Both fusion of light nuclei and fission of heavy nuclei move matter toward the iron peak and release energy.

Nuclear fission

In fission a heavy nucleus splits into two smaller ones. A slow (thermal) neutron can cause uranium-235 to split, for example:

Text
n + ²³⁵₉₂U → ¹⁴¹₅₆Ba + ⁹²₃₆Kr + 3 n + energy

(one of many possible product pairs). Each fission releases about 200 MeV, mostly as kinetic energy of the fragments, which becomes heat. The extra neutrons can trigger more fissions, producing a chain reaction. In a nuclear reactor control rods (made of neutron-absorbing materials such as boron or cadmium) keep the chain steady; a moderator (for example water or graphite) slows neutrons so they are more likely to cause fission. In a power station the heat makes steam that drives turbines.

Fission leaves radioactive waste that needs careful long-term storage, but it emits no carbon dioxide while operating.

Nuclear fusion

In fusion light nuclei join to make a heavier one. The Sun mostly fuses hydrogen into helium. A reaction studied for power stations on Earth is deuterium plus tritium:

Text
²₁H + ³₁H → ⁴₂He + ¹₀n + 17.6 MeV

Fusion needs temperatures of tens of millions of kelvin, because the nuclei must overcome their electric repulsion to come within range of the strong force. At those temperatures matter is a plasma, confined by magnetic fields or compressed by lasers. Fusion energy per kilogram of fuel is about four times that of fission, but sustained, net-power fusion on Earth is still an active research challenge.

Python Energy released in D-T fusion

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Mass is not "turned into" energy in a magical sense: the total mass-energy is conserved. The products simply have less rest mass because energy has been carried away as kinetic energy and radiation.

For the rest-mass energy idea in more detail, see Length Contraction and Mass-Energy. Before that, go back to Nuclear Structure and Isotopes if you need to revisit nucleon numbers.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What is binding energy?

    Binding energy equals the mass defect times c² and is the energy needed to pull the nucleus completely apart.
  2. 2. A nucleus has mass defect 0.0100 u. What is its binding energy (1 u = 931.5 MeV)?

    0.0100 × 931.5 = 9.315 MeV.
  3. 3. Which nucleus is near the peak of the binding energy per nucleon curve?

    Iron-56 (and nickel-62) are among the most tightly bound nuclei per nucleon, around 8.8 MeV.
  4. 4. Why does fusion require extremely high temperatures?

    Nuclei must come within about 1 fm for the strong force to act, so they must be moving fast enough to beat their Coulomb repulsion.

Summary

  • Mass defect Δm gives binding energy E_B = Δm c²; 1 u = 931.5 MeV.
  • Binding energy per nucleon peaks near iron-56, about 8.8 MeV.
  • Fission splits heavy nuclei (about 200 MeV per U-235 fission) and can sustain a chain reaction.
  • Fusion joins light nuclei (D-T releases about 17.6 MeV) but needs very high temperatures.

Next: Time Dilation and Special Relativity