Skip to content
Tutorials Center
My learning

Topics

Lesson 16 of 37 ยท Materials and Shading

UV Unwrapping

Learn UV mapping in Blender: what UVs are, marking seams, unwrapping, Smart UV Project, checking stretching with a checker texture, and packing islands.

An image is flat; a 3D model is not. UV mapping tells Blender which part of a 2D image lands on which part of a 3D surface. The letters U and V are simply the names of the 2D axes (X and Y were already used for 3D space). UV unwrapping is like cutting a model open and laying its skin flat, the way you would cut a cardboard box along its edges to flatten it.

The idea

Each vertex of a face has a 2D position in a UV map in addition to its 3D position. The UV square runs from (0, 0) at the bottom left to (1, 1) at the top right. When a texture is applied, the pixel at that UV coordinate is used for that point of the surface.

Python Stand-in: UV coordinates pick pixels

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Workflow: seams and unwrap

  1. In Edit Mode, select the edges where you want to cut the surface open. Good seam places are hidden or natural: the underside of a cube, the back of a head, along the inner leg.
  2. Press Ctrl+E > Mark Seam (or Edge menu). Seams appear in red.
  3. Select all faces (A) and press U > Unwrap (also in the UV menu). The result appears in the UV Editor.
  4. Switch to the UV Editing workspace to see the 3D view and UV map side by side. Selecting faces in the model highlights them in the UV editor (enable UV Sync Selection to see all faces).

Other unwrap methods in the U menu:

Method Best for
Unwrap Organic shapes with marked seams
Smart UV Project Quick hard-surface objects; splits by angle automatically
Cube / Cylinder / Sphere Projection Simple shapes that match the projection
Project from View Decals, flat panels seen from one side
Follow Active Quads Straightening strips and long quad rows
Lightmap Pack Game lightmaps

Checking quality with a test grid

A UV map is good when textures look even and undistorted. Create a test image: in the UV Editor choose Image > New, set Generated Type to UV Grid or Color Grid. Apply it to the object's Base Color through an Image Texture node. Look for:

  • Stretching: squares become rectangles or diamonds. Add seams or relax islands.
  • Different density: squares appear larger on one part than another. Scale islands to match, or use UV > Average Islands Scale.
  • Visible seams: texture breaks at seams; hide them in unseen places.

Enable the Overlays > Stretch option in the UV editor to see colours: blue = fine, red = heavily stretched.

Python Stand-in: how much is an island stretched?

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Equal texel density (the same amount of UV space per metre) means textures look the same scale across the whole model. The wall above is half as sharp as the floor.

Packing islands

Each separate piece of the unwrapped surface is an island. In the UV Editor:

  • UV > Pack Islands (Ctrl+P in newer versions) fits islands into the 0 to 1 square with minimal waste and sets margins so textures do not bleed.
  • Leave a margin of a few pixels between islands.
  • Keep islands inside the square unless you deliberately tile a texture (UDIMs allow multiple tiles for film work).
  • Keep orientation consistent so that wood grain runs the right way.

Multiple UV maps

An object can have several UV maps (Properties > Object Data > UV Maps). Use one for the main texture and another for baked lighting. Choose which one an Image Texture node reads with a UV Map node.

flowchart LR
  A["Mark seams"] --> B["Unwrap"]
  B --> C["Apply test grid"]
  C --> D{"Stretching?"}
  D -- yes --> A
  D -- no --> E["Pack islands"]
  E --> F["Texture"]

Unwrap, test, fix, pack.

Common mistakes

  • No seams on a complex shape: the unwrap overlaps or stretches wildly.
  • Scaling the object after unwrapping: apply scale first (Ctrl+A) so densities are right.
  • Overlapping islands by accident: textures repeat on both parts, bake and paint tools break.
  • Texture bleed: not enough margin between islands.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. What do UV coordinates describe?

    UVs map 3D surface points to 2D image positions.
  2. 2. What is a seam?

    Seams tell the unwrap algorithm where to cut the mesh.
  3. 3. How do you check for stretching?

    A grid makes distortion and uneven scale obvious.
  4. 4. Which unwrap method is a quick choice for hard-surface objects?

    Smart UV Project splits by angle, suiting mechanical shapes.

Summary

  • UVs map 3D surfaces to a 2D image space from (0, 0) to (1, 1).
  • Mark seams, unwrap, check with a grid, fix stretching and pack islands with margins.
  • Keep texel density consistent and apply scale before unwrapping.
  • Different unwrap methods suit different shapes.

Next: Image Textures and PBR Maps