Skip to content
Tutorials Center
My learning

Topics

Lesson 6 of 37 ยท Interface and Navigation

Navigating the 3D Viewport

Master Blender viewport navigation: orbit, pan, zoom, numpad views, perspective versus orthographic, local view, frame selected and laptop alternatives.

Moving around in 3D space is the first real skill in Blender. You look at your scene through a virtual camera that is separate from the render camera, and you move it constantly while modelling. This lesson covers every navigation method, the standard views, and tricks that save time.

Orbit, pan and zoom

With a three-button mouse:

Action Input
Orbit (rotate the view) Hold the middle mouse button and drag
Pan (slide the view) Shift + middle mouse drag
Zoom Scroll the wheel, or Ctrl + middle drag

Orbiting rotates around the view pivot, normally the centre of the screen. If you want to rotate around what you are looking at, enable Edit > Preferences > Navigation > Orbit Around Selection or use Numpad . (see Frame Selected below). Enabling Zoom to Mouse Position in the same section makes the wheel zoom toward the cursor, which many people prefer.

No middle mouse button?

  • Use the navigation gizmo in the top-right corner of the viewport: drag the axis ball to orbit, drag the hand icon to pan and drag the magnifier to zoom.
  • In Preferences > Input, enable Emulate 3 Button Mouse and use Alt + left mouse to orbit.
  • A touchpad or tablet works with the gizmos and with two-finger scrolling if you enable the option for trackpads.

Standard views with the numpad

The numeric keypad snaps the view to useful angles. Laptops without a numpad can use View > Viewpoint or the gizmo, or enable Emulate Numpad in Preferences > Input (then the number row acts as a numpad).

Key View
Numpad 1 Front (looking along +Y)
Numpad 3 Right
Numpad 7 Top
Ctrl + Numpad 1/3/7 Back, Left, Bottom
Numpad 0 Through the active camera
Numpad 5 Toggle perspective / orthographic
Numpad 4, 6, 8, 2 Orbit in steps
Numpad . Frame the selection

Front, right and top views are orthographic (no perspective), which is perfect for aligning vertices and checking proportions.

Python Stand-in: what each view sees

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

An orthographic view loses one dimension, which is why you need at least two views to place a point exactly.

Perspective versus orthographic

In perspective, objects shrink with distance, like a real camera or eye. In orthographic, parallel lines stay parallel and size does not depend on distance. Perspective is better to judge a scene; orthographic is better to model and align. Toggle with Numpad 5, or in the viewport menu View > Perspective/Orthographic.

The apparent distortion in perspective depends on the focal length of the viewport (set in the Sidebar > View > Focal Length, default 50 mm). A long focal length looks flatter and more like orthographic.

Python Stand-in: perspective shrinks with distance

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Frame, local view and other helpers

  • Frame Selected (Numpad .) zooms to the selected objects; Home frames everything (View All).
  • Local View (Numpad /) hides everything except the selection so you can work on one object. Press again to exit. This is extremely helpful in busy scenes.
  • Walk/Fly navigation (Shift+`) lets you move with WASD like a game, for large scenes such as architecture.
  • Quad View (Ctrl+Alt+Q) shows top, front, right and perspective at once.
  • View > Align View has options to align to the active object or a face normal.
  • Clipping: if objects vanish at a distance or when you zoom in, change Clip Start and Clip End in Sidebar > View.
flowchart LR
  A["Lost in the scene?"] --> B["Home: view all"]
  A --> C["Numpad .: frame selected"]
  A --> D["Numpad /: local view"]
  A --> E["Shift+C: reset cursor and view all"]

Four ways to find your bearings.

Camera view and the render camera

Numpad 0 shows the render camera. In camera view, the border shows the final frame. Do not confuse the viewport view with the camera: orbiting does not move the camera unless you enable Lock Camera to View in the Sidebar. To move the camera to match the viewport use View > Align View > Align Active Camera to View (Ctrl+Alt+Numpad 0).

Tips for comfortable navigation

  • Keep the mouse over the viewport when pressing shortcuts: Blender sends keys to the area under the cursor.
  • Zoom in on the work; do not rely on small viewports.
  • Orthographic views with Wireframe shading (Z pie menu) or X-ray (Alt+Z) let you select hidden vertices.
  • If an object disappears, press Home, check the Outliner, and ensure it is not hidden (eye icon).

Check your understanding

Quick check ยท 5 questions

of 5 answered You scored / 5 ยท perfect!

  1. 1. How do you pan the view with a three-button mouse?

    Middle drag orbits; Shift + middle drag pans; the wheel zooms.
  2. 2. Which key gives the top view?

    Numpad 7 is Top, Numpad 1 is Front, Numpad 3 is Right and Numpad 0 is the camera.
  3. 3. What does Numpad 5 do?

    Numpad 5 switches the projection.
  4. 4. What is Local View for?

    Numpad / isolates the selection until you toggle it off.
  5. 5. What can you enable if your laptop has no numpad?

    Emulate Numpad makes the number row act as a numpad.

Summary

  • Orbit with the middle mouse button, pan with Shift, zoom with the wheel; use the gizmo or emulation if needed.
  • Numpad keys give front, right, top, camera and projection toggle views.
  • Orthographic views are for alignment; perspective is for judging the scene.
  • Frame Selected, Home, Local View and Quad View help you find and focus.
  • Moving the viewport does not move the render camera unless you lock it to the view.

Next: Selecting and Transforming Objects