Skip to content
Tutorials Center
My learning

Topics

Lesson 19 of 37 ยท Lighting and Rendering

Blender Lights: Point, Sun, Spot and Area Lights Explained

Learn the four Blender light types, how Watts and Strength work, how light size controls shadow softness, and the classic three-point lighting setup.

Lighting decides whether a render looks flat or alive. The same model can look like a toy under a single bright bulb and like a product photo under three well-placed lights. Blender gives you four light types, a handful of settings, and a small number of rules that cover almost every scene.

Blender itself cannot run on this site, so menus and shortcuts below are described in words, and every runnable example is a Python stand-in that calculates the same ideas (falloff, power, shadow size) so you can experiment with the numbers. Nothing here shows a fake Blender screenshot.

Adding a light

With the 3D Viewport active, press Shift+A and choose Light, or use Add > Light in the header. Pick one of the four types. The light appears at the 3D cursor. Select it and open the Object Data tab (the green light-bulb icon) in the Properties editor to change its settings.

You can change the type later with the Type buttons at the top of that tab, so the choice is never permanent.

The four light types

Type Behaves like Good for
Point A bare bulb that sends light in every direction Lamps, candles, fill light
Sun The sun: parallel rays from infinitely far away Outdoor daylight, big even key light
Spot A flashlight or stage spotlight with a cone Dramatic highlights, car headlights
Area A soft box or window: a glowing rectangle, disk or ellipse Studio lighting, product shots, window light

Two facts to remember:

  1. Position matters for Point, Spot and Area lights. Move them closer and the surface gets brighter (inverse-square falloff, see below).
  2. For a Sun, only the rotation matters. Because its rays are parallel and its distance is infinite, you can place it anywhere. Its Strength is in watts per square meter: values around 3 to 5 give a bright, natural-looking day once Blender's color management (Filmic or AgX) is applied.

Four light types

Point Every direction
Sun Parallel rays
Spot A cone of light
Area A soft panel

Pick by the shadow and falloff you want.

1 / 2

Power, color and size

Every light has Color and Power (called Strength on a Sun). Point, Spot and Area lights use Watts. A Blender watt is not a real electrical watt: it measures radiated power, so a "100 W" Blender light is far dimmer than a real 100 W bulb. Expect to use hundreds or even thousands of watts for a room.

The most important quality setting is the size:

  • Radius (Point, Spot) or Size (Area): how big the light source is.
  • Angle (Sun): the apparent size of the sun disk.

A tiny light makes hard, sharp shadows. A big light makes soft shadows with gradual edges. A light of size zero is a mathematical point and looks unnatural. That is why photographers use large softboxes for portraits.

Falloff: why distance changes brightness

For Point, Spot and Area lights, brightness drops with the square of the distance: double the distance and the surface gets a quarter of the light. The runnable example below shows the effect with plain numbers.

Python Stand-in: inverse-square falloff

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

This explains a common beginner problem: you move a point light back to "fix" a hot spot and the whole scene goes dark. Raise the power to compensate.

Soft or hard shadows: a calculator

The width of the soft edge (the penumbra) of a shadow depends on the light size, the light-to-object distance and the object-to-surface distance. By similar triangles:

penumbra = light_size * (object_to_surface / light_to_object)

Python Stand-in: shadow softness from light size

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Two lessons follow. A bigger light gives a softer edge. An object close to the surface it shadows (a mug on a table) has a sharper shadow near its base than a raised object, which is why contact shadows look crisp even under soft light.

Spot and Area details

  • Spot Size is the cone angle in degrees. Blend (0 to 1) softens the edge of the cone. Show Cone in the Viewport Display panel draws the cone in the viewport.
  • Area lights have a Shape: Square, Rectangle, Disk or Ellipse. Larger shapes give softer light. Rectangles make rectangular reflections in glossy surfaces, which looks like a real window or softbox.
  • Shadow quality settings differ per engine (see Eevee and Cycles).

Three-point lighting

The classic arrangement for a character or product uses three lights:

flowchart LR
  S["Subject"]
  K["Key light<br/>strongest, 45ยฐ to one side"] --> S
  F["Fill light<br/>weaker, opposite side"] --> S
  R["Rim light<br/>behind, edge glow"] --> S

Key, fill and rim lights around a subject.

  • Key: the main light, usually an Area light about 45 degrees from the camera axis and a bit above the subject.
  • Fill: a weaker, larger, softer light on the opposite side to lift the shadows. Often a quarter to half the power of the key.
  • Rim (back light): a light behind the subject that draws a bright edge and separates it from the background.

Try it: key 1000 W, fill 300 W, rim 500 W, then adjust by eye.

To aim a light at your subject, select the light, then add a Track To constraint (Object Constraint tab) and pick the subject as the target. Set To to -Z and Up to Y. The light now follows the subject wherever you move it.

Common mistakes

  • Using one small Point light for everything. Use a large Area light as the key for pleasing shadows.
  • Pure white light everywhere. A warm key and a cool fill add depth.
  • Trying to "move a Sun closer" to brighten a scene. Change its Strength instead.
  • Judging brightness in Solid view. Switch the viewport to Material Preview or Rendered shading.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Which light type produces parallel rays and is controlled mainly by its rotation?

    A Sun light is infinitely far away, so only its direction (rotation) and Strength matter.
  2. 2. You double the distance between a point light and a wall without changing its power. How bright is the wall now?

    Brightness follows the inverse-square law, so doubling the distance gives one quarter of the light.
  3. 3. How do you get softer shadows from an Area light?

    A larger source produces a wider penumbra, which means soft shadows.
  4. 4. In three-point lighting, which light is normally the strongest?

    The key light is the main light. The fill softens shadows and the rim separates the subject from the background.

Summary

  • Blender has Point, Sun, Spot and Area lights; choose by the shadow and falloff you want.
  • Power is in watts (Strength for a Sun); size controls shadow softness.
  • Brightness falls with the square of distance for non-Sun lights.
  • Three-point lighting (key, fill, rim) is the reliable starting layout.

Next: Eevee and Cycles: Choosing a Render Engine