Skip to content
Tutorials Center
My learning

Topics

Lesson 10 of 37 ยท Modelling

Extrude, Inset and Bevel

Learn the essential Blender modelling tools: extrude, inset, bevel, bridge edge loops, knife, spin and shrink-fatten, with workflows and Python stand-ins.

Three tools do most of the work in hard-surface and general modelling: extrude, inset and bevel. Master them and you can build furniture, buildings, props and vehicles from a single cube. This lesson covers each, plus a handful of companions.

Extrude (E)

Extrude pulls selected geometry out, creating new faces that connect it to where it came from. In Edit Mode:

  1. Select a face (press 3 for face mode and click one).
  2. Press E to extrude. The new face follows the mouse along its normal.
  3. Move or type a distance (for example E, 0.5, Enter) and confirm.

You can also extrude edges and vertices (an extruded vertex draws a new edge). Constrain with an axis (E, Z) to leave the normal direction. Alt+E opens the extrude menu: Extrude Faces, Extrude Faces Along Normals, Extrude Individual Faces and more. Individual extrusion treats each selected face separately, which is great for panels and window recesses.

If you press E then right-click, the new geometry stays where it was, which usually creates duplicate geometry on top of the original. Avoid this: use Esc or cancel by moving the extrusion by zero and then fix with M > By Distance.

Python Stand-in: extrusion adds geometry

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Inset (I)

Inset shrinks the selected face(s) into a smaller copy surrounded by a border of new faces. It is the standard way to create frames, panels and thicknesses.

  • Select a face, press I and move the mouse in to set the thickness. Type a number for an exact value.
  • Press Ctrl while insetting for a depth option, or use the Adjust Last Operation panel: Boundary, Offset Even, Individual and Depth.
  • Individual (press I twice) insets each selected face on its own.

A common recipe for a window or drawer: select a face, I to inset, E to extrude inward (negative), and you get a recess.

Bevel (Ctrl+B)

Bevel replaces a sharp edge with a rounded or chamfered one. Real objects almost never have perfectly sharp edges; a bevel catches light and makes models look believable.

  1. In edge mode select the edges to bevel.
  2. Press Ctrl+B and move the mouse or type a width, scroll the wheel (or type) to set Segments: 1 is a flat chamfer, 3 or more is smooth.
  3. In the options panel, change Profile (0.5 is a round arc), Clamp Overlap and Harden Normals if needed.

Press Ctrl+Shift+B to bevel vertices. You can also bevel with a Bevel modifier, which is non-destructive and can be limited by angle or weight (more in the modifiers lesson).

Python Stand-in: a bevel as a curve of points

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

With one segment you get a straight cut, and with more segments the points follow a quarter circle, which is why more segments look smoother and cost more geometry.

Other essential tools

Tool Key What it does
Bridge Edge Loops Edge > Bridge Edge Loops Connects two loops with faces (tunnels, handles)
Knife K Cut new edges freely; Enter confirms
Spin Mesh > Spin Revolve a profile around an axis (vases, wheels)
Shrink/Fatten Alt+S Move vertices along their normals
Fill F Make a face from selected vertices
Grid Fill Face > Grid Fill Fill a hole with a grid of quads
Merge M Weld vertices together
Dissolve Ctrl+X or X > Dissolve Remove geometry without leaving a hole

Recipe: a simple vase with Spin

  1. In the front view (Numpad 1) add a Plane and enter Edit Mode.
  2. Delete all but a vertical edge; extrude and shape a half-profile, staying on one side of the Z axis.
  3. In top view, make sure the 3D cursor is at the origin, then use Mesh > Spin with the Z axis and 32 steps.
  4. Merge overlapping vertices at the axis with M > By Distance.
Python Stand-in: a spin builds rings from a profile

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Good habits

  • Keep geometry quads where possible; they subdivide and deform predictably.
  • Use the Spreadsheet or statistics overlay to check you did not leave doubled vertices.
  • Apply scale (Ctrl+A) before bevelling so widths are even on all axes.
  • Prefer modifiers (bevel, mirror, array) while the design is still changing.

Check your understanding

Quick check ยท 5 questions

of 5 answered You scored / 5 ยท perfect!

  1. 1. Which key extrudes selected geometry?

    E extrudes; I insets; K is the knife and F fills.
  2. 2. What does inset do to a face?

    Inset shrinks the selection into an inner face, making frames and panels.
  3. 3. How do you bevel selected edges?

    Ctrl+B bevels edges; Ctrl+Shift+B bevels vertices.
  4. 4. Why use more bevel segments?

    More segments approximate a round corner more closely.
  5. 5. Which tool builds a vase-like shape by revolving a profile?

    Mesh > Spin revolves a profile around an axis.

Summary

  • Extrude (E) creates new geometry from selected elements; inset (I) makes inner faces.
  • Bevel (Ctrl+B) rounds sharp edges; segments set the smoothness.
  • Bridge, knife, spin, grid fill, merge and dissolve complete the toolbox.
  • Keep quads, apply scale, and use modifiers for changeable parts.

Next: Loop Cuts and Edge Flow