Skip to content
Tutorials Center
My learning

Topics

Lesson 4 of 37 ยท Getting Started

Your First Scene

Build your first Blender scene step by step: add objects, move them with G R S, set a camera, light the scene, render with F12 and save the image.

In this lesson you will build a simple scene (a ball resting on a floor), light it, and render your first image. Do not worry about quality; the aim is to touch every stage of the pipeline once. Follow along in Blender with the default startup scene open.

Step 1: start clean

Open Blender with the General template. In the 3D viewport, press A to select everything and X (then Delete) to remove the cube, light and camera. You can also leave the camera and light; we will add our own to practise.

Step 2: add objects

With the mouse over the viewport, press Shift+A to open the Add menu. Choose Mesh > UV Sphere. A sphere appears at the 3D cursor, and a small Adjust Last Operation panel appears in the bottom-left; open it to change radius or segments right away.

Add a plane for the floor: Shift+A > Mesh > Plane. Then press S, type 8 and press Enter to scale it to eight times its size.

Step 3: move, rotate and scale with G, R, S

The three key transform tools are the same for every object:

Key Action Example
G Grab (move) G, Z, 1, Enter moves up by 1
R Rotate R, Z, 45, Enter turns 45 degrees
S Scale S, 2, Enter doubles the size

Press the key, optionally press X, Y or Z to constrain to an axis, optionally type a number, then Enter to confirm or Esc / right-click to cancel. Move the sphere up by its radius (1 m by default) so it rests on the plane: select it, press G, Z, 1, Enter.

Python Stand-in: place a sphere on a floor

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Step 4: smooth the sphere

A UV sphere looks faceted until you smooth it. With the sphere selected, choose Object > Shade Auto Smooth (or Shade Smooth, depending on the version). The faces are unchanged; only how light is calculated across them changes.

Step 5: the camera

The camera defines the final image. If you deleted it, add one with Shift+A > Camera. Then:

  1. Press Numpad 0 to look through it (or View > Cameras > Active Camera).
  2. In the viewport, press Ctrl+Alt+Numpad 0 to snap the camera to your current view. This is the fastest way to frame a shot: orbit the viewport until the composition looks good, then use that shortcut.
  3. To adjust it from the camera view, tick Lock Camera to View in the Sidebar (N, View tab) and orbit.

Step 6: add a light

Add a light with Shift+A > Light > Area (or Sun). Move it above and to one side. In the Properties editor > Object Data (light) tab, set Power and Size. A larger area light gives softer shadows. Without a light, the render would be dark.

flowchart LR
  A["Add sphere and plane"] --> B["Position with G R S"]
  B --> C["Add camera"]
  C --> D["Add light"]
  D --> E["F12 render"]
  E --> F["Save image"]

The minimal route from nothing to a picture.

Step 7: render

Press F12 or use Render > Render Image. A render window opens. The default engine is EEVEE (fast, real-time) or Cycles (a path tracer that is slower but more physically accurate); choose in Properties > Render. When finished, use Image > Save As (Shift+Alt+S) to save a PNG. Closing the window does not save the image.

Press F11 to bring the render window back. F12 renders the current frame; Ctrl+F12 renders an animation.

Rendering does not save automatically. If you close the render window before using Image > Save As, the image is gone and you must render again.

Step 8: save your project

Press Ctrl+S, choose a folder and name, such as first_scene_v01.blend. A .blend file contains the whole scene. Save often.

Python Stand-in: estimate render time

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The numbers are invented, but the relationship is real: doubling the width and height means four times the pixels, so about four times the render time.

Common first-scene problems

  • Black render: no light, or the light faces away. Add or aim a light.
  • Nothing in the image: the camera is not looking at the objects. Check the camera view.
  • Sphere under the floor: it is centred at Z = 0, half of it below the plane. Move it up by its radius.
  • Sphere looks blocky: apply Shade Smooth.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Which shortcut opens the Add menu in the viewport?

    Shift+A opens the Add menu for meshes, lights, cameras and more.
  2. 2. What does pressing G, then Z, then typing 2 and Enter do?

    G grabs (moves), Z constrains to the Z axis and the typed number is the distance.
  3. 3. How do you render the current frame?

    F12 renders an image; Ctrl+F12 renders an animation.
  4. 4. Why should you use Image > Save As after a render?

    A render lives in memory until you save the image.

Summary

  • Add objects with Shift+A; transform with G, R and S plus an axis and a number.
  • A camera frames the shot (Ctrl+Alt+Numpad 0 snaps it to your view) and a light makes it visible.
  • F12 renders an image; save it with Image > Save As.
  • Ctrl+S saves the .blend project; save new versions often.

Next: A Tour of the Blender Interface