Skip to content
Tutorials Center
My learning

Topics

Lesson 2 of 39 · Getting Started

Atomic Units and Constants

Learn Hartree atomic units, convert to SI with CODATA constants, and see why the fine-structure constant sets the scale of atomic physics.

SI units are inconvenient for atoms. The Bohr radius is about 5.3 × 10⁻¹¹ m and the energy of hydrogen's ground state is about -2.2 × 10⁻¹⁸ J. Writing powers of ten in every line of a derivation hides the structure of the equations and invites mistakes.

Atomic physicists therefore use Hartree atomic units, in which the natural constants of atomic physics are set equal to 1. Every equation becomes shorter, and numerical programs work with numbers close to 1, which is also better for floating-point accuracy. This lesson shows you how to move between atomic units and SI, and why the fine-structure constant matters.

Definition

In Hartree atomic units the following four quantities all equal 1:

Quantity Symbol Value in atomic units
Reduced Planck constant ħ 1
Electron mass mₑ 1
Elementary charge e 1
Coulomb constant 1/(4πε₀) 1

From these four you can build a unit for every other quantity.

Quantity Atomic unit Expression Approximate SI value
Length Bohr radius a₀ 4πε₀ħ² / (mₑe²) 5.29 × 10⁻¹¹ m
Energy Hartree Eₕ mₑe⁴ / ((4πε₀)²ħ²) 4.36 × 10⁻¹⁸ J = 27.2 eV
Time ħ/Eₕ 2.42 × 10⁻¹⁷ s
Velocity a₀Eₕ/ħ = αc 2.19 × 10⁶ m/s
Electric field Eₕ/(e a₀) 5.14 × 10¹¹ V/m

Be careful about the word "atomic units". Some authors use Rydberg atomic units, where ħ = 2mₑ = e²/2 = 1. This track always uses Hartree units. The two energy units differ by a factor of two: 1 Eₕ = 2 Ry.

The Hamiltonians you already know

In SI units the hydrogen Hamiltonian is H = p²/(2mₑ) − e²/(4πε₀ r). In atomic units it is simply:

Text
H = −½ ∇² − 1/r

The ground-state energy is exactly −½ Eₕ, which is −13.6 eV. The n-th level is −1/(2n²). For a hydrogen-like ion with nuclear charge Z, the Hamiltonian is −½∇² − Z/r and the energies are −Z²/(2n²).

The harmonic oscillator H = p²/2m + ½mω²x² becomes −½ d²/dx² + ½x² when m = ω = ħ = 1. That is a dimensionless choice, convenient for oscillators, though it is not the same as atomic units; make sure you know which convention a source is using.

Converting with CODATA constants

Never type constants from memory in a program. The scipy.constants module holds the CODATA recommended values and can convert for you. The units are defined by constants that depend on the CODATA release, so very small differences between versions of a library are normal.

Python Atomic units expressed in SI

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The ratio v/c printed above is the fine-structure constant α ≈ 1/137.036. The electron in the hydrogen ground state moves at about α c, roughly 0.7 percent of light speed. That is why non-relativistic quantum mechanics works so well for light atoms and why relativistic corrections, studied in Chapter 3, are small.

The fine-structure constant as a scale ruler

Many atomic scales are powers of α times simple units:

  • Bohr radius: a₀ = ħ/(mₑ c α)
  • Binding energy: Eₕ = α² mₑ c²
  • Fine-structure splitting: of order α² × Eₕ
  • Lamb shift and hyperfine structure: smaller still

So α² ≈ 5.3 × 10⁻⁵ is the typical size of relativistic corrections to atomic energies. This is why perturbation theory with relativistic terms works: the expansion parameter really is small.

Practical conversion helpers

When you write numerical code, work in atomic units internally and convert only for printing. The helper below converts energies, lengths and times from atomic units to common practical units.

Python Converting results out of atomic units

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The Lyman-alpha line is in the ultraviolet near 121.5 nm (a tiny correction occurs because the real proton is not infinitely heavy, which this simple conversion ignores).

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. In Hartree atomic units, what is the ground-state energy of hydrogen?

    The energy levels are -1/(2n²), so n = 1 gives -1/2 Hartree, which is about -13.6 eV.
  2. 2. Which constants are set to 1 in Hartree atomic units?

    Hartree units fix the four constants of non-relativistic atomic physics; c then equals 1/α, about 137.
  3. 3. What is the speed of light in atomic units?

    The atomic unit of velocity is αc, so c = 1/α ≈ 137.036 atomic units.
  4. 4. Why is it good practice to program in atomic units and convert only at the end?

    Working with numbers of order 1 reduces rounding trouble and prevents unit-conversion mistakes in the middle of a calculation.

Summary

  • Hartree atomic units set ħ = mₑ = e = 1/(4πε₀) = 1; the hydrogen Hamiltonian is −½∇² − 1/r.
  • Length unit a₀, energy unit Eₕ = 27.2 eV, velocity unit αc, and c ≈ 137 in these units.
  • Relativistic corrections are of relative order α², which is why they can be treated as perturbations.
  • Use scipy.constants for CODATA values and convert units only at the input and output of a program.

Next: Matrix Methods for Hamiltonians