Skip to content
Tutorials Center
My learning

Topics

Lesson 15 of 37 · Similarity and Transformations

Similar Figures and Scale Factors

Learn what makes two shapes similar, how to find the scale factor, why perimeters scale by k and areas by k squared, and how maps and models use scale.

A photo and its enlargement, a map and the land it shows, a toy car and a real car: each pair has the same shape but a different size. In geometry such figures are similar. Similarity lets you measure things you cannot reach, like the height of a tree or the width of a river, and it explains how scale drawings and models work.

Similar figures

Two figures are similar (written ~) if:

  1. all corresponding angles are equal, and
  2. all corresponding sides are in the same ratio.

That ratio is the scale factor k. If every length in figure B is k times the matching length in figure A, then the scale factor from A to B is k.

  • k > 1: B is an enlargement of A.
  • 0 < k < 1: B is a reduction of A.
  • k = 1: the figures are congruent.

Both conditions matter for polygons with more than three sides. A square and a long rectangle have equal angles (all 90°) but unequal side ratios, so they are not similar. A square and a rhombus have equal side ratios but different angles, so they are not similar either. (Triangles are special: you will see in the next lesson that checking one condition often suffices.)

Worked example. Rectangle A is 4 cm by 6 cm. Rectangle B is 10 cm by 15 cm. Side ratios: 10/4 = 2.5 and 15/6 = 2.5. They match, and all angles are 90°, so the rectangles are similar with k = 2.5.

Python Are two polygons similar?

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The function reports (True, k) when all the side ratios agree. A square and a non-square rhombus would pass the sides test but fail the angle test, which is why the function comment warns you to also check angles for shapes with four or more sides.

Scale factor, perimeter and area

If two figures are similar with scale factor k:

  • Lengths (sides, heights, perimeters, diagonals) are multiplied by k.
  • Areas are multiplied by k².
  • Volumes (for solids) are multiplied by k³.

Why does area scale by k²? Take a rectangle a × b with area ab. Scaling both sides by k gives ka × kb = k²ab. Any shape can be built from tiny rectangles, so the same factor holds for every shape.

Worked example. Triangle A has perimeter 12 cm and area 6 cm². Triangle B is similar with k = 3. Its perimeter is 3 × 12 = 36 cm and its area is 3² × 6 = 54 cm².

This explains the earlier claim in Chapter 1: doubling both sides of a rectangle (k = 2) doubles the perimeter but multiplies the area by 4.

Reverse problem. Two similar figures have areas 18 cm² and 50 cm². Their areas ratio is 50/18 = 25/9, so k = √(25/9) = 5/3. The lengths are in the ratio 5 : 3.

Python Lengths, areas and volumes under scaling

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Scale drawings and maps

A scale such as 1 : 50 000 on a map means 1 unit on the map is 50 000 of the same unit in real life. So 1 cm on the map represents 50 000 cm = 500 m.

  • Real length = map length × scale denominator (for a 1 : n scale).
  • Map length = real length ÷ n.

Worked example. On a 1 : 25 000 map two towns are 8.4 cm apart. Real distance = 8.4 × 25 000 = 210 000 cm = 2.1 km.

Areas on maps scale by the square of the scale: on a 1 : 100 plan, 1 cm² represents 100² = 10 000 cm² = 1 m².

Python A scale calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

When working with areas and volumes, convert the scale factor first: area factor = k², volume factor = k³. A common mistake is to multiply the area by k instead of k².

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Rectangle A is 3 cm by 5 cm and rectangle B is 9 cm by 20 cm. Are they similar?

    The side ratios are 3 and 4, which differ, so the rectangles are not similar.
  2. 2. Two similar figures have scale factor 4. By what factor does the area change?

    Areas scale by k² = 16.
  3. 3. On a 1 : 50 000 map, 3 cm represents how many kilometers?

    3 × 50 000 = 150 000 cm = 1500 m = 1.5 km.
  4. 4. A similar figure has an area 4 times as large. What is the scale factor for lengths?

    Area factor k² = 4, so k = 2.

Summary

  • Similar figures have equal corresponding angles and sides in a constant ratio, the scale factor k.
  • Lengths scale by k, areas by k², volumes by k³.
  • Rectangles with different side ratios are not similar, even though their angles match.
  • A map scale 1 : n turns map lengths into real lengths by multiplying by n; area scales by n².

Next: Similar Triangles: AA, SAS and SSS