Skip to content
Tutorials Center
My learning

Topics

Lesson 19 of 37 ยท Circles

Parts of a Circle and Key Terms

Learn the vocabulary of circles: center, radius, diameter, chord, arc, sector, segment, tangent and secant, with a plot and a point-position checker.

A circle is one of the simplest shapes and one of the richest. Almost every curved object you meet, from a coin to a wheel to a planet's orbit (roughly), is described with a handful of words. In this lesson you learn those words precisely, because every later circle lesson depends on them.

A circle is the set of all points in a plane that are the same distance from a fixed point. That fixed point is the center, and the fixed distance is the radius. Notice what the definition says: the circle is only the curve. The flat region inside it is called the disk (many textbooks say "circle" for both; we will say "the area of a circle" when we mean the disk).

The main parts

Here are the terms you must know. Read them with the picture in your head, then check them in the plot below.

Term Meaning
Center The fixed point in the middle. Usually named O.
Radius (plural: radii) A segment from the center to any point on the circle. Its length is r.
Chord A segment whose two endpoints are both on the circle.
Diameter A chord that passes through the center. Its length is d = 2r.
Arc A piece of the circle itself (the curve).
Semicircle An arc that is exactly half the circle (cut by a diameter).
Sector The region between two radii and the arc they cut off (a "pizza slice").
Segment The region between a chord and its arc (a "cap").
Secant A full line that cuts the circle at two points.
Tangent A line that touches the circle at exactly one point.
Concentric circles Circles that share the same center but have different radii.

Two facts follow straight from the definition. First, all radii of one circle are equal. Second, the diameter is the longest possible chord, and it equals twice the radius: d = 2r.

"Radius" means two things: the segment itself and its length. Context tells you which one is meant. The same is true of "diameter" and "chord".

Minor and major arcs

Any two points on a circle split it into two arcs. The shorter one is the minor arc; the longer one is the major arc. If the two points are the ends of a diameter, both arcs are semicircles. We name an arc by its endpoints, arc AB, and use a third point (arc ACB) when we need to say which of the two arcs we mean.

The size of an arc can be measured in two ways. As an angle, the arc's measure equals the central angle that cuts it off (a full circle is 360ยฐ). As a length, it is a distance along the curve. We study arc length in the next lesson; for now, remember that the angle measure of an arc and its length are different things.

flowchart TD
    A["Circle"] --> B["Boundary curve"]
    A --> C["Inside region"]
    B --> D["Arc"]
    B --> E["Tangent touches once"]
    B --> F["Secant cuts twice"]
    C --> G["Sector: two radii and an arc"]
    C --> H["Segment: a chord and an arc"]

How the main terms relate: some belong to the curve, some to the region inside it.

Position of a point

Because a circle is defined by distance, you can test where any point P lies by comparing its distance d from the center with the radius r:

  • If d < r, the point is inside the circle.
  • If d = r, the point is on the circle.
  • If d > r, the point is outside the circle.

The distance between two points (x1, y1) and (x2, y2) is โˆš((x2 - x1)ยฒ + (y2 - y1)ยฒ). The program below applies this idea. It is a small checker that uses the definition directly.

Python Is the point inside, on or outside the circle?

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The point (5, 7) is exactly 5 units from (2, 3) because 3ยฒ + 4ยฒ = 25. That is the classic 3-4-5 right triangle at work, and it is why that point lands on the circle.

Seeing the parts

The next program draws a circle and marks a radius, a diameter, a chord, a tangent and a secant. Change the angles to move the lines around and watch which ones stay tangent or secant.

Python Draw a circle and its parts

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Common mistakes

  • Mixing up chord and secant. A chord is a segment inside the circle; a secant is a whole line that extends beyond it.
  • Calling every line through the circle a tangent. A tangent touches at exactly one point and never enters the inside.
  • Forgetting that the diameter is a chord. It is the special chord through the center.
  • Using diameter where the radius belongs. Every formula in the next lessons uses r. If a problem gives d, halve it first.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. A circle has a diameter of 18 cm. What is its radius?

    The radius is half the diameter, so 18 รท 2 = 9 cm.
  2. 2. Which line touches a circle at exactly one point?

    A tangent touches at one point only. A secant cuts the circle twice, and a chord and a diameter are segments with both endpoints on the circle.
  3. 3. A circle has center (0, 0) and radius 5. Where is the point (4, 4)?

    The distance is โˆš(4ยฒ + 4ยฒ) = โˆš32 โ‰ˆ 5.66. That is greater than the radius 5, so the point is outside.
  4. 4. What is the region bounded by a chord and the arc it cuts off called?

    A segment lies between a chord and its arc. A sector lies between two radii and an arc.

Summary

  • A circle is all points at a fixed distance (the radius) from a center.
  • The diameter is the longest chord and equals 2r.
  • A chord has both endpoints on the circle; a secant is a line through two points of the circle; a tangent touches at one point.
  • A sector is bounded by two radii and an arc; a segment by a chord and an arc.
  • Compare the distance from the center with r to decide whether a point is inside, on or outside.

Next: Circumference, Pi and Arc Length