Skip to content
Tutorials Center
My learning

Topics

Lesson 18 of 37 · Similarity and Transformations

Dilations and Symmetry

Learn dilations with a center and scale factor, how they create similar figures, and how to count line and rotational symmetries of shapes, with code.

The last transformation in this chapter, the dilation, is the one that makes figures bigger or smaller. It is the transformation behind zooming a photo and behind every similar figure you studied earlier. The second half of the lesson is about symmetry: when a shape looks unchanged after a transformation.

Dilations

A dilation needs a center C and a scale factor k. Every point P is sent to the point P′ on the ray from C through P, with CP′ = k · CP.

  • k > 1: the image is larger (enlargement).
  • 0 < k < 1: the image is smaller (reduction).
  • k = 1: nothing changes.
  • k < 0: the image is on the opposite side of the center, so the figure is also turned upside down (rotated 180°). For example k = -2 doubles the size and rotates by 180°.

If the center is the origin, the rule is simple: (x, y) → (kx, ky). For a center (h, v) use (x, y) → (h + k(x - h), v + k(y - v)).

Worked example. Triangle with vertices (1, 1), (4, 1), (1, 3), dilation about the origin with k = 2 gives (2, 2), (8, 2), (2, 6). The sides double: 3 → 6, 2 → 4, and the third side √13 → 2√13.

What a dilation keeps and changes

  • Angles stay equal.
  • Lengths are multiplied by |k|; areas by k².
  • Each line maps to a parallel line (or to itself if it passes through the center).
  • The image is similar to the pre-image, but not congruent unless k = ±1.

This is how we define similarity in a transformation-based course: two figures are similar if one can be mapped onto the other by a dilation followed by rigid motions.

Python Dilate a triangle

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

For k = 0.5 the side ratios are 0.5 and the area ratio is 0.25. For k = -1 the side ratios are 1 (lengths are multiplied by |k|), so a dilation by -1 is a rigid motion, namely a 180° rotation about the center. Notice that the shoelace formula used for the area is just a way of computing the area of any polygon from its coordinates. You will study it properly in the coordinate geometry chapter.

Line symmetry

A figure has line symmetry (reflection symmetry) if a line divides it into two halves that are mirror images. That line is a line of symmetry. Folding along it makes the halves match exactly.

  • An isosceles triangle has 1 line of symmetry; an equilateral triangle has 3.
  • A rectangle (not a square) has 2; a square has 4; a rhombus (not a square) has 2; a kite has 1.
  • A regular n-gon has n lines of symmetry.
  • A circle has infinitely many.
  • A scalene triangle and a general parallelogram have none.

Rotational symmetry

A figure has rotational symmetry if it looks the same after being turned by some angle less than 360° about its center. The order of the symmetry is the number of times it matches itself during one full turn (counting the full turn). The smallest such angle is 360° / order.

Figure Order of rotational symmetry
Equilateral triangle 3
Square 4
Rectangle (not a square) 2
Parallelogram (not a rhombus or rectangle) 2
Regular n-gon n
Isosceles (not equilateral) triangle 1 (no rotational symmetry)

A shape with order 1 has no rotational symmetry. A shape with point symmetry (order 2) looks the same upside down.

flowchart TD
    S["Regular n-gon"] --> L["n lines of symmetry"]
    S --> R["Rotational symmetry of order n"]
    R --> A["Smallest turn = 360° / n"]

Regular polygons have as many lines of symmetry as rotational order.

Counting symmetries in code

We can test rotational symmetry numerically: rotate the vertices about the center by 360/m degrees and check the set of points is unchanged.

Python Find the order of rotational symmetry

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The function only tries turns of 360/m degrees for m up to 12 and uses the vertex set (the corners), which is enough for these polygons. The center is the average of the vertices, the centroid of the points.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A dilation about the origin with scale factor 3 sends (2, -1) to:

    Multiply both coordinates by 3: (6, -3).
  2. 2. By what factor does a dilation with scale factor 5 multiply area?

    Areas scale by k², which is 25.
  3. 3. How many lines of symmetry does a rectangle that is not a square have?

    It has one vertical and one horizontal line of symmetry. Its diagonals are not lines of symmetry.
  4. 4. What is the order of rotational symmetry of a regular pentagon?

    A regular n-gon has rotational symmetry of order n, with smallest turn 360° / 5 = 72°.

Summary

  • A dilation with center C and scale factor k sends P to P′ on ray CP with CP′ = k·CP; (x, y) → (kx, ky) about the origin.
  • Dilations keep angles, multiply lengths by |k| and areas by k²; the image is similar to the pre-image.
  • Line symmetry: a mirror line splits the shape into matching halves; a regular n-gon has n lines.
  • Rotational symmetry: the shape matches itself after a turn of 360°/order; a regular n-gon has order n.
  • Rigid motions and dilations together describe congruence and similarity.

Next: Parts of a Circle and Key Terms