Skip to content
Tutorials Center
My learning

Topics

Lesson 5 of 37 ยท Points, Lines and Angles

Points, Lines, Planes and Segments

Learn the undefined terms of geometry, how to name lines, rays and segments, collinear and coplanar points, midpoints and the segment addition postulate.

Every structure in geometry rests on three ideas: point, line and plane. They are called undefined terms because we cannot define them using simpler words without going in circles. Instead we describe them and agree on rules (postulates) about how they behave. From there we build segments, rays, angles and everything else.

Points, lines and planes

  • A point marks a location. We draw a dot and name it with a capital letter, like A.
  • A line is straight and extends forever in both directions. We name it by two points on it, such as line AB (written with a double-headed arrow over the letters), or by a lowercase letter, โ„“.
  • A plane is a flat surface extending forever. We draw it as a parallelogram and name it by a capital script letter, such as plane P, or by three points not on one line, such as plane ABC.

Two postulates we will use constantly:

  1. Through any two distinct points there is exactly one line.
  2. Through any three points that are not on one line there is exactly one plane.

The first explains why a table with three legs never wobbles on a flat floor but a table with four legs can: three points (not in a line) define a plane, but a fourth point need not be on it.

Collinear and coplanar

  • Points are collinear if they all lie on the same line.
  • Points are coplanar if they all lie in the same plane.

Any two points are collinear, and any three points are coplanar. Interesting questions start with three points (are they collinear?) and four points in space (are they coplanar?).

Two lines in a plane either intersect in exactly one point or are parallel (they never meet). Two planes that meet do so along a line.

Segments and rays

Lines go on forever, but we usually work with pieces of them.

Figure Description Notation
Line Infinite in both directions line AB
Ray Starts at one point and goes on forever in one direction ray AB (starts at A, passes through B)
Line segment Two endpoints and everything between segment AB

The order of letters matters for a ray: ray AB starts at A, ray BA starts at B and they point in opposite directions. For a segment it does not matter: AB and BA are the same segment. The length of a segment is the distance between its endpoints.

Two rays with the same endpoint, pointing in opposite directions, are called opposite rays. Together they form a line.

Midpoint and the segment addition postulate

The midpoint of a segment is the point that divides it into two equal parts. If M is the midpoint of AB, then AM = MB, and each is half of AB.

Segment addition postulate. If point B lies on segment AC between A and C, then AB + BC = AC.

Worked example. Points A, B, C are in that order on a line. AB = 2x + 3, BC = 5x - 4 and AC = 41. Find x and the lengths.

  1. Segment addition: (2x + 3) + (5x - 4) = 41.
  2. Combine like terms: 7x - 1 = 41, so 7x = 42 and x = 6.
  3. AB = 2(6) + 3 = 15 and BC = 5(6) - 4 = 26. Check: 15 + 26 = 41. โœ“

The code below solves any problem of this type by treating each length as a linear expression aยทx + b. It uses fractions, so an answer that is not a whole number is still exact (try AC = 40).

Python Segment addition solver

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Are three points collinear?

With coordinates, there is a neat test. Three points A, B, C are collinear exactly when the triangle they form has zero area. The area comes from the cross product: (B - A) ร— (C - A) = (Bx - Ax)(Cy - Ay) - (By - Ay)(Cx - Ax). If this is 0, the points are on one line.

Python Collinearity test

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The last case has all three points on the vertical line x = 2, so they are collinear even though no slope exists. The cross-product test handles vertical lines without trouble, which is why it is better than comparing slopes.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. How many lines pass through two distinct points?

    Two distinct points determine exactly one line, which is the first postulate of this lesson.
  2. 2. Which is different from the others?

    AB and BA name the same segment, but ray AB starts at A and goes on forever through B.
  3. 3. B is between A and C on a line. AB = 9 and BC = 14. What is AC?

    By segment addition, AC = AB + BC = 9 + 14 = 23.
  4. 4. M is the midpoint of AB and AB = 17 cm. What is AM?

    A midpoint splits a segment into two equal halves: 17 รท 2 = 8.5 cm.

Summary

  • Point, line and plane are undefined terms; two points fix a line and three non-collinear points fix a plane.
  • Collinear means on one line; coplanar means in one plane.
  • A line is infinite both ways, a ray has one endpoint, a segment has two.
  • Segment addition: if B is between A and C, then AB + BC = AC.
  • A midpoint creates two equal halves; a cross-product test shows whether three points are collinear.

Next: Angles and Their Measure