Skip to content
Tutorials Center
My learning

Topics

Lesson 9 of 39 · Matter and Measurement

Unit Conversions and Density

Use conversion factors and dimensional analysis to change units without mistakes, then apply them to density, mass and volume problems with worked examples.

Chemistry problems are full of unit changes: grams to kilograms, milliliters to liters, centimeters to meters. A reliable method, called dimensional analysis (or the factor-label method), lets you do them without guessing whether to multiply or divide. You will also use it to solve density problems, which are among the most common first calculations.

Conversion factors

A conversion factor is a fraction that equals 1 because the top and bottom describe the same amount in different units. For example 1 m = 100 cm, so:

(100 cm / 1 m) = 1 and (1 m / 100 cm) = 1

Multiplying by 1 does not change the quantity, only its units. Choose the form of the factor that cancels the unit you want to get rid of.

Example: convert 2.5 m to cm.

2.5 m × (100 cm / 1 m) = 250 cm

The unit m cancels (it is on top and bottom), and cm stays. If you had accidentally written 1 m / 100 cm, the units would not cancel, and the problem would warn you.

Dimensional analysis

Start Write the given with its unit.
Multiply By a factor equal to 1.
1 / 2

Chains of factors

You can link several factors. Convert 3.0 km/h into m/s:

3.0 km/h × (1000 m / 1 km) × (1 h / 3600 s) = 0.83 m/s

(3.0 × 1000 / 3600 = 0.8333..., which is 0.83 to 2 sig figs.)

Python Factor-label calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Squared and cubed units

When a unit is squared or cubed, so is its conversion factor. Since 1 m = 100 cm, 1 m³ = (100 cm)³ = 1,000,000 cm³, which is 10⁶ cm³. A common mistake is converting m³ to cm³ with a factor of 100. Always cube the whole factor.

  • 1 dm³ = 1 L = 1000 mL = 1000 cm³
  • 1 m³ = 1000 L

Density

Density is mass per unit volume. It tells you how tightly matter is packed.

density = mass / volume (symbol: ρ, "rho")

Common units are g/cm³ (same as g/mL) for solids and liquids, and g/L or kg/m³ for gases.

Substance Density near room temperature
Hydrogen gas (about 20 °C, 1 atm) 0.084 g/L
Ethanol 0.789 g/mL
Water 0.998 g/mL (20 °C); about 1.000 near 4 °C
Ice about 0.92 g/cm³
Aluminum 2.70 g/cm³
Iron 7.87 g/cm³
Copper 8.96 g/cm³
Lead 11.34 g/cm³
Mercury 13.53 g/mL
Gold 19.3 g/cm³

Because density is an intensive property, it can help identify a material. Objects with a density lower than the liquid they are in float. That is why ice (0.92) floats on liquid water (about 1.00), which matters for life in frozen lakes.

Rearrange the formula as needed: mass = density × volume and volume = mass / density. A triangle with mass on top, and density and volume on the bottom can help you remember.

Worked examples

Find density. A metal cube has mass 54.0 g and each side is 2.00 cm. Volume = 2.00³ = 8.00 cm³. Density = 54.0 / 8.00 = 6.75 g/cm³.

Find mass. What is the mass of 250 mL of ethanol? mass = 0.789 g/mL × 250 mL = 197 g (about 2 × 10² g if 250 has only two significant figures).

Find volume. What volume does 100 g of aluminum occupy? volume = 100 g / 2.70 g/cm³ = 37.0 cm³ (using three sig figs for the data, 100. g).

Python Density toolbox and a float-or-sink test

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your answers

After any calculation, check three things: the units are right, the number has a sensible size, and it has the right number of significant figures. A density of 0.002 g/cm³ for a metal would be a red flag.

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Convert 4.2 km to meters.

    1 km = 1000 m, so 4.2 × 1000 = 4200 m.
  2. 2. A sample has mass 90.0 g and volume 10.0 cm³. What is its density?

    Density = 90.0 / 10.0 = 9.00 g/cm³.
  3. 3. How many cm³ are in 1 m³?

    (100 cm)³ = 10⁶ cm³. The factor must be cubed.
  4. 4. Ice floats on liquid water because

    Ice is about 0.92 g/cm³, less than water, so it floats.

Summary

  • A conversion factor equals 1; choose its form so the unwanted unit cancels.
  • Chain factors for multi-step conversions and cube the factor for cubic units.
  • density = mass / volume; it is an intensive property that helps identify materials.
  • Rearrange for mass = density × volume and volume = mass / density.
  • Always check units, size and significant figures.

Next: Early Atomic Theory: From Democritus to Dalton