Skip to content
Tutorials Center
My learning

Topics

Lesson 39 of 39 · Projects and Practice

Practice Set: States of Matter, Gases and Solutions

Practice gas laws, heat calculations, separation methods, molarity and dilution with worked answers, runnable checkers and a short quiz.

This final set covers chapter 8: particles and states, the gas laws, heating curves, separation and solutions. Work each problem with units written out, then check with the code. Answers are given after each part.

Useful constants: R = 8.314 J/(mol·K); water c = 4.18 J/(g·K), L_fus = 334 J/g, L_vap = 2260 J/g; NaCl M = 58.44 g/mol.

Part A: Gases

  1. A gas at 120 kPa has volume 3.0 L. It is expanded at constant temperature to 5.0 L. Find the new pressure.
  2. 4.0 L of gas at 20 °C is heated to 80 °C at constant pressure. Find the new volume.
  3. How many moles of gas are in a 10.0 L container at 250 kPa and 300 K?

Answers.

  1. P₂ = 120 × 3.0 / 5.0 = 72 kPa.
  2. T₁ = 293.15 K, T₂ = 353.15 K; V₂ = 4.0 × 353.15 / 293.15 = 4.82 L.
  3. n = PV/RT = (250 × 10.0)/(8.314 × 300) = 1.00 mol.
Python Check the gas answers

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Part B: Heat and changes of state

  1. How much heat is needed to warm 200 g of water from 25 °C to 75 °C?
  2. How much heat is needed to boil 100 g of water already at 100 °C?
  3. Why does a burn from steam at 100 °C usually hurt more than one from water at 100 °C?

Answers.

  1. q = 200 × 4.18 × 50 = 41,800 J.
  2. q = 100 × 2260 = 226,000 J.
  3. Steam also releases its latent heat (2260 J/g) as it condenses on skin, on top of the heat from cooling.
Python Check the heat answers

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Part C: Mixtures and solutions

  1. Which technique separates sand, salt and iron filings? Suggest an order.
  2. What mass of NaCl is needed for 500 mL of 0.200 M solution?
  3. What volume of 6.0 M stock is needed to make 300 mL of 1.5 M?
  4. 30 g of sugar is dissolved in 120 g of water. Find the mass percent of sugar.

Answers.

  1. Use a magnet for the iron; add water and filter to remove the sand; evaporate the water to recover the salt.
  2. n = 0.200 × 0.500 = 0.100 mol; m = 0.100 × 58.44 = 5.844 g.
  3. V₁ = 1.5 × 300 / 6.0 = 75 mL.
  4. 30 / (30 + 120) × 100 = 20%.
Python Check the solutions answers

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Mini-project: a heating-curve calculator

Write a function that takes the mass of water and a start and end temperature and returns the heat in kilojoules. Handle ice below 0 °C, liquid between 0 and 100 °C and steam above. Test your function on 50 g from -10 °C to 120 °C and compare with the heating-curve lesson (the total should be about 153.7 kJ).

Python Starter and a sample solution

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The sample ignores edge cases (such as starting exactly at 0 °C inside the melting stage) to stay short. Extend it to cover them as a challenge.

Quiz: mixed review

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. The pressure of a gas at constant temperature is tripled. What happens to its volume?

    By Boyle's law, P × V is constant.
  2. 2. Which temperature must be used in gas-law calculations?

    Gas laws need an absolute scale starting at zero.
  3. 3. What is the mass percent if 5 g of salt is in 95 g of water?

    Solution mass is 100 g, so the percentage is 5/100 × 100 = 5%.
  4. 4. Why does the temperature stay at 100 °C while water boils?

    The added energy changes the potential energy of the particles during the change of state.

Summary

  • Gas problems: choose the law, convert to kelvin, keep units consistent.
  • Heat problems split into warming steps (m c ΔT) and state changes (m L).
  • Plan separations from the property that differs between components.
  • Solution problems rely on n = m/M, c = n/V and c₁V₁ = c₂V₂.

Back to the track: Chemistry: Foundations