Skip to content
Tutorials Center
My learning

Topics

Lesson 2 of 39 ยท Getting Started

The Scientific Method and Lab Safety

Learn how chemists test ideas with controlled experiments, record data, and stay safe in a lab with simple rules, hazard symbols and good habits.

Chemistry is an experimental science. Ideas are only accepted when they survive careful tests, and many tests happen in a laboratory where chemicals can be hazardous. This lesson covers both sides: how chemists think, and how they stay safe while doing it.

The scientific method in practice

The "scientific method" is not a rigid recipe. It is a habit of testing ideas against evidence. A typical cycle looks like this.

flowchart LR
  A["Observe"] --> B["Ask a question"]
  B --> C["Form a hypothesis"]
  C --> D["Test with an experiment"]
  D --> E["Analyze the data"]
  E --> F["Conclude and share"]
  F --> A

The cycle repeats: each conclusion raises new questions.

  • Observation: you notice that sugar dissolves faster in hot tea than in iced tea.
  • Hypothesis: a testable explanation, such as "a higher temperature makes sugar dissolve faster".
  • Experiment: a test designed to show whether the hypothesis is wrong.
  • Analysis and conclusion: compare the results with your prediction. If they disagree, change the hypothesis.

A hypothesis is a proposed explanation that can be tested. A theory is a well-supported explanation built from many tested hypotheses. A law summarizes a pattern that holds every time we measure it, such as the conservation of mass.

Designing a fair test

A fair experiment changes only one thing at a time.

  • The independent variable is the one you change on purpose (temperature of the water).
  • The dependent variable is what you measure in response (time for the sugar to dissolve).
  • Controlled variables are kept the same (mass of sugar, volume of water, stirring).
  • A control group is a run with no change, used for comparison.
Python Variables in a dissolving test

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Repeat measurements and averages

Every measurement has some random error. You repeat trials and use the mean (average). The spread of results tells you how reliable the mean is. The numbers below are invented practice values, not results from a real experiment.

Python Mean and spread of repeated trials (practice numbers)

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Accuracy and precision

These two words are different.

  • Accuracy means how close a measurement is to the true value.
  • Precision means how close repeated measurements are to each other.

A scale that always reads 2 g too high gives precise but inaccurate results. Good chemists aim for both, and they use the word error for a difference from the true value, not for a "mistake".

Lab safety rules

Most lab accidents are avoidable. These habits are standard in school and research labs everywhere.

  1. Wear safety goggles whenever chemicals, heat or glass are in use, and tie back long hair.
  2. Know your exits and equipment: where the eyewash, safety shower, fire blanket and extinguisher are.
  3. Follow your teacher's instructions and never start an unplanned experiment.
  4. Never taste, and never sniff directly. If you must smell something, waft the vapor toward you with your hand.
  5. Heat carefully. Point test tubes away from people, and use tongs or a holder for hot glassware.
  6. Add acid to water, never water to acid, because the heat released can make the liquid spatter.
  7. Label everything and read the label twice before using a bottle.
  8. Dispose of waste correctly. Do not pour chemicals down the sink unless you are told it is safe.
  9. Wash your hands after the lab and do not eat or drink in it.
  10. Report spills and injuries immediately.

If chemicals get in your eyes, go to the eyewash at once and rinse for a long time while telling an adult. If clothing catches fire, stop, drop and roll, or use the safety shower or fire blanket.

Hazard symbols

Chemical containers carry pictograms from the Globally Harmonized System (GHS), used in many countries. The most common ones are shown here.

Pictogram meaning What it warns about
Flame Flammable: catches fire easily
Corrosive Damages skin, eyes or metals
Skull and crossbones Acutely toxic: harmful in small amounts
Exclamation mark Irritant or less serious health hazard
Environment Harmful to water life
Gas cylinder Gas under pressure

Always read the safety data sheet (SDS) for a chemical before using it. It tells you the hazards, first aid and disposal.

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. In an experiment on how temperature affects dissolving, which is the independent variable?

    The independent variable is the one you deliberately change, which is temperature. Time is the dependent variable; sugar mass and beaker are controlled.
  2. 2. A scale always reads 2 g too high, but gives the same reading every time. The measurements are:

    Repeated readings agree with each other (precise), but they are off from the true value (not accurate).
  3. 3. Which is the correct way to dilute concentrated acid?

    Adding acid slowly to water keeps the heat released under control. Adding water to acid can cause dangerous spattering.
  4. 4. What does a flame pictogram on a bottle mean?

    A flame symbol warns that the chemical can catch fire.

Summary

  • The scientific method is a cycle: observe, ask, hypothesize, test, analyze, share.
  • A fair test changes one independent variable and controls the others.
  • Repeat measurements and use the mean; accuracy is closeness to the true value, precision is closeness of repeats.
  • Wear goggles, never taste chemicals, add acid to water, and report accidents at once.
  • Read hazard pictograms and safety data sheets before using a chemical.

Next: Lab Equipment and Measuring Tools