Skip to content
Tutorials Center
My learning

Topics

Lesson 34 of 39 · States of Matter and Mixtures

Changes of State and Heating Curves

Understand melting, boiling, condensing, freezing and sublimation, why temperature stays flat during a change of state, and calculate the heat needed.

Add heat to ice and it warms, melts, warms as liquid water, boils and finally becomes steam. The path has flat stretches, where heat flows in but the temperature does not change. This lesson explains those flat stretches and shows you how to calculate the heat for each step.

The names of the changes

Change From to Energy
Melting solid to liquid absorbed
Freezing liquid to solid released
Boiling (evaporation) liquid to gas absorbed
Condensation gas to liquid released
Sublimation solid to gas absorbed
Deposition gas to solid released

Evaporation happens at the surface of a liquid at any temperature, when a fast particle escapes. Boiling happens throughout the liquid at the boiling point, when the vapor pressure equals the surrounding pressure. At sea-level pressure water boils at 100 °C; on a mountain, where pressure is lower, it boils at a lower temperature.

Why the temperature stays flat

During melting or boiling, added energy goes into pulling particles apart (overcoming intermolecular forces), which raises potential energy, not average kinetic energy. Since temperature measures average kinetic energy, it stays constant until the change is complete.

flowchart LR
    A["Ice<br/>warming"] --> B["Melting<br/>flat at 0 °C"]
    B --> C["Water<br/>warming"]
    C --> D["Boiling<br/>flat at 100 °C"]
    D --> E["Steam<br/>warming"]

The five stages of heating water at 1 atm.

Heat calculations

Two formulas cover everything:

  • Temperature change: q = m × c × ΔT
  • Change of state: q = m × L

Here L is the latent heat. For water: specific heat of ice about 2.09 J/(g·K), liquid 4.18 J/(g·K), steam about 2.01 J/(g·K); latent heat of fusion 334 J/g; latent heat of vaporization 2260 J/g (at 100 °C).

Worked example

How much heat turns 50 g of ice at -10 °C into liquid water at 20 °C?

  1. Warm the ice to 0 °C: 50 × 2.09 × 10 = 1045 J
  2. Melt it: 50 × 334 = 16,700 J
  3. Warm the water to 20 °C: 50 × 4.18 × 20 = 4180 J

Total: 1045 + 16,700 + 4180 = 21,925 J, or about 21.9 kJ. Notice that melting takes far more heat than the warming steps. Vaporization takes even more: 2260 J/g is about 6.8 times the heat of fusion.

This is why steam burns are so severe and why sweat cools you: evaporating a gram of water removes about 2.3 kJ from the skin.

Python Total heat for a multi-step change

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Python Plot a heating curve

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Both programs use rounded textbook values for the constants, and they treat the heating as ideal: no heat is lost to the surroundings.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Why does the temperature stay constant while ice melts?

    During a change of state the added energy increases potential energy while kinetic energy stays the same.
  2. 2. How much heat is needed to melt 10 g of ice at 0 °C? (L = 334 J/g)

    q = m × L = 10 × 334 = 3340 J.
  3. 3. Which change releases energy?

    Condensation forms attractions between particles, so energy is released.
  4. 4. Why does water boil at a lower temperature on a high mountain?

    Boiling occurs when vapor pressure equals the surrounding pressure, which is lower at altitude.

Summary

  • Changes of state: melting, freezing, boiling, condensation, sublimation, deposition.
  • Heating curves are flat during a change of state, because energy goes into potential energy.
  • Use q = m c ΔT for warming and q = m L for changes of state.
  • Water: L_fus = 334 J/g, L_vap = 2260 J/g, c = 4.18 J/(g·K).

Next: Mixtures, Separation and Solutions