Skip to content
Tutorials Center
My learning

Topics

Lesson 23 of 39 ยท The Periodic Table

Metals, Nonmetals and Element Families

Compare metals, nonmetals and metalloids, then meet the alkali metals, halogens and noble gases and see why each family behaves the way it does.

Most elements are metals. If you draw a staircase line from boron down to astatine on the periodic table, the elements to the left (apart from hydrogen) are metals, and those to the right are nonmetals. Elements that touch the line have mixed properties and are called metalloids.

This lesson compares the three classes, then looks at three famous families whose behavior follows directly from their outer electrons.

Properties of metals and nonmetals

Property Metals Nonmetals
Appearance Shiny (lustrous) Dull when solid
Conduct electricity Yes Usually no (graphite is an exception)
Conduct heat Well Poorly
Malleable and ductile Yes No, solids are brittle
State at room temperature Solid (except mercury) Gases, one liquid (bromine), solids
Typical ions Positive (cations) Negative (anions)
Oxides Usually basic Usually acidic

These are generalizations with exceptions. Mercury is a liquid metal near room temperature; diamond and graphite are both carbon, a nonmetal, yet graphite conducts electricity.

Why the difference?

Metal atoms have few valence electrons and low ionization energies, so they lose electrons easily and form positive ions. Nonmetal atoms have high electronegativity and tend to gain or share electrons. The trends from the previous two lessons predict this: the metallic character increases down a group and decreases across a period.

Metalloids

The metalloids are generally listed as boron, silicon, germanium, arsenic, antimony and tellurium. Lists vary a little between books (some add polonium or astatine). They look metallic but are brittle, and they are semiconductors: their electrical conductivity is between that of metals and insulators, and it rises as they warm up. That property makes silicon the base material of electronic chips.

Three classes

Metals Lose electrons, conduct
Nonmetals Gain or share electrons
Metalloids Semiconductors like Si
1 / 2

The alkali metals (group 1)

Lithium, sodium, potassium, rubidium, caesium (cesium in US spelling) and francium each have one valence electron. They are soft, with low melting points, and they lose that electron very easily to form Mโบ ions.

Reactivity increases down the group, because the outer electron is farther from the nucleus and easier to remove. They react with water to give a metal hydroxide and hydrogen gas:

2Na + 2Hโ‚‚O โ†’ 2NaOH + Hโ‚‚

Lithium reacts fairly gently, sodium vigorously, and potassium so violently that the hydrogen can ignite. Because of this, alkali metals are stored under oil and handled only by trained people.

The halogens (group 17)

Fluorine, chlorine, bromine, iodine and astatine have seven valence electrons and need only one more to fill the shell. They form diatomic molecules (Fโ‚‚, Clโ‚‚, Brโ‚‚, Iโ‚‚) and Xโป ions (halides).

Reactivity decreases down the group, the opposite of the alkali metals, because it is harder for a large atom to pull in an electron. Appearance at room temperature runs from a pale yellow gas (fluorine) and a green-yellow gas (chlorine) to a red-brown liquid (bromine) and a shiny dark solid (iodine).

A more reactive halogen displaces a less reactive one from its salt:

Clโ‚‚ + 2KBr โ†’ 2KCl + Brโ‚‚

The noble gases (group 18)

Helium, neon, argon, krypton, xenon and radon have full outer shells (2 for helium, 8 for the others). With full shells, they have very high ionization energies and almost no tendency to gain electrons, so they are chemically unreactive. Heavier ones, such as xenon, can form a few compounds, but under special conditions.

Python Predict the halogen displacement

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Python Group 1 properties: the trend in first ionization energy

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Which is a typical property of nonmetal solids?

    Nonmetal solids shatter when hit and generally do not conduct electricity well; graphite is a notable exception.
  2. 2. How does the reactivity of the alkali metals change down the group?

    The outer electron is farther from the nucleus and is lost more easily as the atoms get larger.
  3. 3. Why are the noble gases unreactive?

    A full outer shell means they do not need to gain, lose or share electrons.
  4. 4. Which reaction occurs?

    Chlorine is more reactive than bromine, so it displaces bromide ions from solution.

Summary

  • Metals sit left of the staircase line, nonmetals right, and metalloids along it.
  • Metals tend to form cations; nonmetals tend to form anions or share electrons.
  • Alkali metals (group 1) become more reactive down the group.
  • Halogens (group 17) become less reactive down the group; a more reactive halogen displaces a less reactive one.
  • Noble gases (group 18) have full shells and are unreactive.

Next: Ions and Ionic Bonds