Skip to content
Tutorials Center
My learning

Topics

Lesson 10 of 38 · The Unit Circle and Radians

Radians

Understand radians as the angle that cuts an arc equal to the radius, convert between radians and degrees, and learn the common angles in terms of pi.

Degrees are convenient for everyday life, but mathematicians and programmers prefer another unit for angles: the radian. Almost every programming language, and all of calculus, uses radians. The reason is that radians connect an angle directly to a length along a circle, which makes many formulas simpler.

The definition

Take a circle of radius r. Lay a piece of string of length r along the edge of the circle. The angle at the center that the string spans is one radian.

In general, the angle in radians is the arc length divided by the radius:

θ = s / r

where s is the arc length. This works for any size of circle, because both s and r grow together. A radian is a pure ratio of two lengths, so it has no real "unit" attached to it.

Why 2π?

The circumference of a circle is 2πr. So the full turn, whose arc is the whole circumference, has angle

θ = 2πr / r = 2π radians.

That gives the key link:

360° = 2π radians, or equivalently 180° = π radians.

Since π ≈ 3.14159, one radian is about 180/π ≈ 57.3°.

Converting

  • Degrees to radians: multiply by π/180.
  • Radians to degrees: multiply by 180/π.

Examples.

  • 90° = 90 × π/180 = π/2 rad
  • 60° = π/3 rad
  • 45° = π/4 rad
  • 30° = π/6 rad
  • 2 rad = 2 × 180/π ≈ 114.6°
Python Degrees and radians converter

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Common angles

Degrees Radians
0° 0
30° π/6
45° π/4
60° π/3
90° π/2
120° 2π/3
135° 3π/4
150° 5π/6
180° π
270° 3π/2
360° 2π

A useful pattern: π/6 is 30°, so 5π/6 is five of those steps, which is 150°. To convert a multiple of π to degrees, replace π with 180°: 7π/4 → 7 × 180°/4 = 315°.

Radian mode on calculators and code

Most calculators have a DEG/RAD mode switch. If you type sin(30) in radian mode, you get the sine of 30 radians (about −0.988), not 0.5. Be sure the mode matches your input. In Python, math.sin always uses radians.

Python The mode mistake

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Why radians are natural

When the angle is in radians, the arc length formula is just s = rθ, and the area of a sector is A = ½ r² θ (lesson 5 of this chapter). In calculus, the derivative of sin x is cos x only when x is in radians. In degrees you would need an annoying extra factor of π/180. Also, for tiny angles, sin θ ≈ θ only when θ is in radians.

Python Small angle approximation

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The error shrinks quickly as the angle gets smaller.

Radian values are usually left as multiples of π (π/3) for exactness, or written as decimals (about 1.047) when you need a number.

Worked example

A wheel turns through 3.5 radians. How many degrees, and how many full turns?

  • Degrees: 3.5 × 180/π ≈ 200.5°.
  • Turns: 3.5 / (2π) ≈ 0.557 of a turn.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. How many radians are in a half turn?

    A full turn is 2π radians, so a half turn is π radians.
  2. 2. Convert 240 degrees to radians.

    240 × π/180 = 4π/3.
  3. 3. How large is 1 radian, approximately?

    180/π is about 57.3.
  4. 4. On a circle of radius 5 cm, an arc of length 10 cm subtends what angle?

    θ = s/r = 10/5 = 2 radians.

Summary

  • One radian is the angle whose arc equals the radius; θ = s / r.
  • 180° = π rad and 360° = 2π rad; one radian ≈ 57.3°.
  • Degrees to radians: multiply by π/180; radians to degrees: multiply by 180/π.
  • Computers and calculus use radians; check your calculator mode.

Next: The Unit Circle