Skip to content
Tutorials Center
My learning

Topics

Lesson 2 of 38 · Getting Started

Angles and Degrees

Learn what an angle is, how degrees, minutes and seconds work, how to name and classify angles, and how to convert between decimal degrees and DMS.

An angle measures how far you turn. Imagine standing still and spinning around. A small turn is a small angle; a full spin brings you back to where you started. Trigonometry is all about angles, so we need a clear way to name, measure, and compare them.

In this lesson you will learn the parts of an angle, how degrees are defined, how to classify angles, and how to switch between decimal degrees and degrees-minutes-seconds. Radians, the other main unit, get their own lesson in chapter 3.

Parts of an angle

An angle is formed by two rays that share a starting point.

  • The shared point is the vertex.
  • The two rays are the sides (or arms).
  • In trigonometry we often call one side the initial side (where the turn starts) and the other the terminal side (where it ends).

We name an angle with three letters, such as ∠ABC, where B is the vertex. Or we use a Greek letter like θ (theta), α (alpha), or β (beta).

Degrees

A full turn is divided into 360 equal parts, and each part is one degree, written 1°. Why 360? The number comes from ancient Babylonian astronomy and has lots of divisors (2, 3, 4, 5, 6, 8, 9, 10, 12 and more), which makes common fractions of a turn come out as whole numbers.

Turn Degrees
Full turn 360°
Half turn 180°
Quarter turn 90°
One-eighth turn 45°

By convention, a positive angle turns counterclockwise and a negative angle turns clockwise. Angles larger than 360° are allowed: 450° is a full turn plus 90°.

Classifying angles

Name Size
Acute between 0° and 90°
Right exactly 90°
Obtuse between 90° and 180°
Straight exactly 180°
Reflex between 180° and 360°

Two special pairs appear often:

  • Complementary angles add up to 90°.
  • Supplementary angles add up to 180°.

So the complement of 35° is 55°, and the supplement of 35° is 145°.

flowchart LR
    A["0° to 90°<br/>acute"] --> B["90°<br/>right"]
    B --> C["90° to 180°<br/>obtuse"]
    C --> D["180°<br/>straight"]
    D --> E["180° to 360°<br/>reflex"]

Angle types in order of size.

Minutes and seconds

For precision, a degree can be split further: 1° = 60 minutes (60′) and 1′ = 60 seconds (60″). This is the same idea as hours, minutes, and seconds of time. An angle such as 23° 27′ 30″ is written in DMS form. The same angle in decimal degrees is:

23 + 27/60 + 30/3600 = 23.4583…°

To go the other way, take the whole degrees, multiply the fractional part by 60 to get minutes, and repeat for seconds.

Python Decimal degrees and DMS converter

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Many modern tools use decimal degrees, but DMS is still common in maps, navigation, and astronomy.

Coterminal angles

Two angles are coterminal if they end at the same side after turning. You can add or subtract any whole number of full turns (360°) without changing where the terminal side points. So 30°, 390°, and −330° are all coterminal.

To bring any angle into the range 0° to 360°, use the remainder after division by 360. Python's % operator already returns a result between 0 and 360 for a positive modulus, even for negative angles.

Python Normalize an angle

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Worked example

Problem. A clock shows 4:00. What is the angle between the hour hand and the minute hand?

Solution. The clock face is a full turn of 360° divided into 12 hours, so each hour mark is 360° ÷ 12 = 30° apart. At 4:00 the minute hand points at 12 and the hour hand at 4, which is 4 marks away: 4 × 30° = 120°. The angle is 120°, an obtuse angle.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. How many degrees are in a half turn?

    A full turn is 360 degrees, so a half turn is 180 degrees.
  2. 2. What is the complement of 62 degrees?

    Complementary angles sum to 90, and 90 - 62 = 28.
  3. 3. Which angle is coterminal with 45 degrees?

    Adding one full turn gives 45 + 360 = 405 degrees.
  4. 4. Convert 12 degrees 30 minutes to decimal degrees.

    30 minutes is 30/60 = 0.5 of a degree.

Summary

  • An angle has a vertex and two sides; counterclockwise turns are positive.
  • A full turn is 360°; a right angle is 90° and a straight angle is 180°.
  • Complementary angles sum to 90°, supplementary angles to 180°.
  • 1° = 60′ and 1′ = 60″; DMS and decimal degrees are interchangeable.
  • Coterminal angles differ by whole turns of 360°.

Next: Triangles and the Pythagorean Theorem