Skip to content
Tutorials Center
My learning

Topics

Lesson 32 of 38 · Applications and Vectors

Bearings, Elevation and Depression

Use three-figure bearings, angles of elevation and depression with right triangles and the sine and cosine rules to solve navigation and height problems.

Trigonometry started as a tool for measuring things you cannot reach: the height of a tower, the distance to a ship, the width of a river. This lesson covers the standard language for those problems: bearings for direction on a map and angles of elevation and depression for looking up and down.

Bearings

A bearing is a direction given as an angle measured clockwise from north, written with three figures. North is 000°, east is 090°, south is 180°, west is 270°. A bearing of 045° points north-east.

The back bearing (the direction of the return journey) differs by 180°: if you sail on 060°, the way back is 240°. Add 180° if the bearing is below 180°, subtract 180° otherwise.

Bearings are measured from the north line at the starting point of each leg. That is why a diagram with a north arrow at each point is essential.

Converting a bearing to components

For a movement of distance d on bearing β:

Text
east  component = d sin β
north component = d cos β

(This is the reverse of the usual math convention, because bearings start from north and go clockwise.)

Example. A ship sails 12 km on bearing 060°, then 9 km on bearing 150°. How far is it from the start, and on what bearing?

  • Leg 1: east = 12 sin 60° ≈ 10.392, north = 12 cos 60° = 6.
  • Leg 2: east = 9 sin 150° = 4.5, north = 9 cos 150° ≈ −7.794.
  • Total: east ≈ 14.892, north ≈ −1.794.
  • Distance: √(14.892² + 1.794²) = 15.0 km. (The two legs are at right angles, because 150° − 60° = 90°, so this is a 9-12-15 right triangle.)
  • Bearing from the start: the point is east and slightly south, so the angle is just past 90°.
Python Dead reckoning: add up legs of a journey

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The function uses atan2(east, north) instead of atan2(y, x). That swap is what converts a math angle (measured counterclockwise from east) to a bearing (measured clockwise from north).

Bearings with non-right triangles

When the legs do not meet at 90°, use the cosine rule. Example. From port, ship A sails 20 km on bearing 040° and ship B sails 30 km on bearing 110°. The angle between their paths at the port is 110° − 40° = 70°. The distance between the ships is

Text
d² = 20² + 30² − 2(20)(30) cos 70° = 400 + 900 − 1200(0.3420) = 889.6
d ≈ 29.8 km
Python Distance and bearing between two ships

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Angles of elevation and depression

  • The angle of elevation is the angle above the horizontal, measured when you look up at an object.
  • The angle of depression is the angle below the horizontal, measured when you look down.

Both are measured from a horizontal line at the observer's eye. By alternate angles, the angle of depression from point P to point Q equals the angle of elevation from Q to P.

flowchart LR
    O["Observer"] -- "horizontal" --- H["Horizontal line"]
    O -- "angle of elevation" --> T["Top of tower"]

The angle between the horizontal and the line of sight is the angle of elevation.

One angle

From a point 50 m from the base of a tower, the angle of elevation of the top is 32°. The tower's height is 50 tan 32° ≈ 31.2 m. If the observer's eyes are 1.6 m above the ground, add 1.6 m: the tower is about 32.8 m.

Two angles from different distances

A harder, very common problem: you cannot reach the base of the building. You measure an angle of elevation of 30° at one point, move 40 m closer, and measure 45°. How tall is the building (above eye level)?

Let the height be h and the distance from the nearer point be x. Then h = x tan 45° = x and h = (x + 40) tan 30°. So x = (x + 40)(0.5774), which gives x(1 − 0.5774) = 23.09, and x ≈ 54.64 m. The height is about 54.6 m.

Python Height from two elevation angles

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What is the back bearing of 245°?

    Subtract 180° from bearings above 180°: 245° − 180° = 65°, written 065°.
  2. 2. A drone flies 100 m on bearing 090°. How far east of its start is it?

    East component = d sin β = 100 sin 90° = 100 m, and north component = 100 cos 90° = 0.
  3. 3. From a cliff top you look down at a boat with an angle of depression of 20°. What angle of elevation does the boat see to the cliff top?

    Alternate angles between parallel horizontal lines are equal, so the angle of elevation is also 20°.
  4. 4. A mast casts a 30 m shadow when the sun's elevation is 40°. What is its height (to the nearest metre)?

    Height = 30 tan 40° ≈ 30 × 0.8391 ≈ 25.2 m.

Summary

  • Bearings are three-figure angles clockwise from north; back bearing differs by 180°.
  • East component is d sin β, north component is d cos β.
  • Use atan2(east, north) to turn components back into a bearing.
  • Angles of elevation and depression are measured from the horizontal and are equal for the two ends of one line of sight.
  • Combine right-triangle ratios with the sine and cosine rules for harder problems.

Next: Vectors and Components