Skip to content
Tutorials Center
My learning

Topics

Lesson 35 of 38 · Applications and Vectors

Harmonic Motion and Waves

Model springs, tides and sound with y = A sin(ωt + φ) + D, find amplitude, period and frequency, and see beats appear from adding two waves.

Many things in nature repeat in a smooth cycle: a mass bouncing on a spring, a pendulum swinging through a small angle, the tide rising and falling, a guitar string vibrating, the alternating current in a wall socket. The simplest model for all of them is a sine or cosine function. This is simple harmonic motion.

The general model

Text
y(t) = A sin(ω t + φ) + D
Symbol Name Meaning
A amplitude maximum displacement from the middle line (always positive)
ω angular frequency (rad/s) how fast the phase advances
φ phase shift (radians) where in the cycle you start at t = 0
D vertical shift the height of the middle line

From these:

Text
period      T = 2π / ω      (time for one full cycle)
frequency   f = 1 / T = ω / (2π)    (cycles per second, in hertz)

The maximum value is D + A and the minimum is D − A. A cosine function is the same wave shifted: cos x = sin(x + π/2).

Example: a tide. Suppose water depth in a harbor follows d(t) = 5 + 2 cos(2π t / 12.4) metres, with t in hours. This is a model, not a forecast: a typical twice-daily tide repeats roughly every 12.4 hours. The amplitude is 2 m, the middle depth is 5 m, the period is 12.4 h, high tide is 7 m and low tide is 3 m. At t = 0 the water is at high tide because cos 0 = 1.

Reading a wave

Given a description, write the equation:

  • A spring bobs between 12 cm and 28 cm above the floor every 2 s, starting at its lowest point.
  • Middle line D = (12 + 28)/2 = 20; amplitude A = (28 − 12)/2 = 8.
  • Period 2 s, so ω = 2π/2 = π.
  • Starting at the minimum: use −cos: y(t) = 20 − 8 cos(π t).
Python Amplitude, period and frequency from a model

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Sound: pitch and loudness

A pure musical tone is a sine wave of pressure. Its frequency sets the pitch, and its amplitude sets the loudness. The note A above middle C is conventionally tuned to 440 Hz, so its period is 1/440 ≈ 0.00227 s, about 2.27 milliseconds.

Adding waves: beats

What happens if two nearly equal tones sound at once? Use the sum-to-product identity from the identities chapter:

Text
sin a + sin b = 2 sin((a + b)/2) cos((a − b)/2)

Take a = 2π f₁ t and b = 2π f₂ t. The sum becomes

Text
2 cos(π (f₁ − f₂) t) · sin(π (f₁ + f₂) t)

This is a fast wave at the average frequency (f₁ + f₂)/2 whose loudness is multiplied by a slow wave at (f₁ − f₂)/2. Your ear hears the loudness swell and fade |f₁ − f₂| times per second (the loudness is the absolute value of the slow factor, which peaks twice per slow cycle). These are beats. Piano tuners use them: two strings at 440 Hz and 444 Hz beat 4 times a second, and a tuner adjusts until the beating slows to nothing.

Python Beats from two close frequencies

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

In half a second the envelope reaches its maximum (the loudest moments) 2 times, so you hear 4 beats per second over a full second.

Fitting a model to data

If you measure a repeating quantity, you can pick D = (max + min)/2 and A = (max − min)/2, get ω from the period, then adjust φ using a known point.

Python Build a sine model from measurements

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. In y = 3 sin(4t) + 10, what is the period?

    T = 2π/ω = 2π/4 = π/2.
  2. 2. A wave swings between 2 and 12. What are the amplitude and the middle line?

    A = (12 − 2)/2 = 5 and D = (12 + 2)/2 = 7.
  3. 3. Two pure tones of 500 Hz and 503 Hz sound together. How many beats per second are heard?

    The beat rate is the difference of the frequencies, 3 Hz.
  4. 4. Which is the frequency of a wave with period 0.005 s?

    f = 1/T = 1/0.005 = 200 Hz.

Summary

  • Harmonic motion is modeled by y = A sin(ωt + φ) + D.
  • Amplitude A, period T = 2π/ω, frequency f = 1/T, middle line D.
  • Use maximum and minimum to get A = (max − min)/2 and D = (max + min)/2.
  • Adding two close frequencies produces beats at |f₁ − f₂| per second, explained by the sum-to-product identity.
  • A cosine is a sine shifted by π/2.

Next: Practice: Identities and Equations