Skip to content
Tutorials Center
My learning

Topics

Lesson 12 of 38 · Wavefunctions and Probability

Wave Packets and Superposition

Build localized particles from plane waves, learn group and phase velocity, and simulate how a free Gaussian wave packet moves and spreads over time.

A plane wave e^{i(kx - ωt)} has a perfectly definite momentum ħk, but it fills all of space equally: |ψ|² is constant, and it cannot be normalized. A real particle is somewhere. To describe it, we add many plane waves with different wavenumbers so that they interfere constructively in one region and destructively elsewhere. The result is a wave packet.

This lesson explains how packets move, why they spread, and how to simulate them, before we meet the Schrödinger equation (Chapter 4), which explains the same behavior from first principles.

Superposition

Quantum mechanics obeys the superposition principle: if ψ₁ and ψ₂ are possible states, so is a ψ₁ + b ψ₂ for complex numbers a and b (normalized afterwards). It is why interference appears. Using an integral instead of a sum, a general free-particle state is

ψ(x, t) = (1/√(2π)) ∫ φ(k) e^{i(kx - ω(k) t)} dk

where φ(k) is the amplitude of the plane wave with wavenumber k. For a free particle with E = p²/(2m), p = ħk and E = ħω, the dispersion relation is

ω(k) = ħ k² / (2m)

Each component oscillates at its own rate, so the shape of the packet changes in time.

Phase velocity and group velocity

  • The phase velocity of a single component is v_phase = ω/k = ħk/(2m), which is half of the classical velocity p/m.
  • The group velocity is the speed of the packet's envelope, v_group = dω/dk = ħk/m = p/m.

The group velocity equals the classical particle velocity, as it should: the packet travels like the classical particle it represents. The phase velocity of a single plane wave carries no information and is not the speed of anything measurable.

Waves to particles

Plane wave Definite p, everywhere
Superpose many Interference localizes
Wave packet Moves at p/m
1 / 2

Spreading of a Gaussian packet

For an initial Gaussian packet with position spread σ₀ (so |ψ|² has standard deviation σ₀), the free-particle result is

σ(t) = σ₀ √(1 + (ħ t / (2 m σ₀²))²)

The spread is nearly constant for short times and grows linearly, σ ≈ ħt/(2mσ₀), for long times. A narrower packet (small σ₀) has a wide range of momenta and spreads faster.

The time scale is τ = 2 m σ₀² / ħ. For an electron with σ₀ = 1 nm this is about 1.7 × 10⁻¹⁴ s (17 femtoseconds). For a 1 mg dust speck localized to 1 µm, τ is about 2 × 10¹⁶ s, hundreds of millions of years, and its relative growth is utterly invisible over any real observation. That is why macroscopic objects do not visibly spread.

Python Time scale of spreading

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Simulating a moving packet

Each plane-wave component evolves as φ(k) → φ(k) e^{-iħk²t/(2m)}. On a grid, we get φ(k) with the fast Fourier transform (FFT), multiply by the phase factor, and transform back. Use units with ħ = m = 1, so that ω = k²/2.

Python Free packet: motion and spreading (hbar = m = 1)

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The simulated mean moves at group velocity k₀ and the width follows the formula. Because the FFT treats the box as periodic, make the grid large enough that the packet never reaches the edge.

A packet made of just two waves: beats

You can see how interference localizes with only two waves. e^{i k₁ x} + e^{i k₂ x} has |ψ|² = 2 + 2 cos((k₂ - k₁)x): periodic bumps whose spacing is 2π/(k₂ - k₁). A continuous range of k values makes a single bump instead of a repeating series.

Python Adding more plane waves narrows the bump

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

With 2 waves the pattern repeats; with 40 closely spaced waves, there is one central bump and the repeating peaks sit so far away that they fall outside the plot. A wider range of k gives a narrower bump in x: the root of the uncertainty principle.

A free packet never stops spreading, but a bound particle in a potential well does not spread forever; it settles into stationary states, which are the subject of the next chapters.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. The speed at which a wave packet's envelope moves is the

    The envelope travels at v_group = dω/dk.
  2. 2. For a free particle ω(k) = ħk²/(2m). The group velocity is

    dω/dk = ħk/m = p/m, the classical velocity.
  3. 3. A narrower initial packet (smaller σ₀) spreads

    A narrow packet contains a broad range of momenta, so its components separate faster; τ = 2mσ₀²/ħ is shorter.
  4. 4. Why do macroscopic objects not visibly spread?

    τ = 2mσ₀²/ħ is enormous when the mass is large.

Summary

  • Localized particles are superpositions of plane waves (wave packets).
  • Free dispersion ω = ħk²/(2m): group velocity ħk/m (classical), phase velocity half that.
  • A Gaussian packet spreads as σ(t) = σ₀ √(1 + (ħt/(2mσ₀²))²).
  • FFT simulation: multiply φ(k) by e^{-iħk²t/(2m)}.

Next: Momentum Space and the Fourier Transform