Skip to content
Tutorials Center
My learning

Topics

Lesson 21 of 38 · Particle in a Box and Barriers

The Potential Step: Reflection and Transmission

Scatter a quantum wave off a potential step: derive R and T, see partial reflection above the step and total reflection below it, and verify R + T = 1.

So far the particle was trapped. Now let it move freely and meet a change in potential. A ball rolling up a hill either makes it over or rolls back, with no in-between. A quantum wave behaves differently, like light hitting a glass surface: part of the wave is reflected and part is transmitted, even when the particle has enough energy to get across.

The potential step is the simplest example of scattering. It introduces two tools you will use again and again: matching conditions at a boundary, and the probability current, which tells you how much probability flows in each direction.

The step

Let the potential be

Text
V(x) = 0     for x < 0
V(x) = V₀    for x > 0

A particle of energy E arrives from the left, where there is no force. The time-independent Schrödinger equation gives plane waves on each side.

On the left, with wave number k₁ = √(2mE) / ħ:

Text
ψ(x) = e^{i k₁ x} + r e^{-i k₁ x}        (x < 0)

The first term is the incident wave (amplitude 1), moving right. The second is the reflected wave with unknown amplitude r, moving left.

On the right, if E > V₀, the wave number is k₂ = √(2m(E - V₀)) / ħ, and there is only a transmitted wave moving right (nothing comes in from the far right):

Text
ψ(x) = t e^{i k₂ x}                      (x > 0)

Matching conditions

ψ and ψ' are continuous at x = 0 (the potential has a finite jump):

Text
1 + r = t
k₁ (1 - r) = k₂ t

Solving these two equations:

Text
r = (k₁ - k₂) / (k₁ + k₂)
t = 2 k₁ / (k₁ + k₂)

Probability current, R and T

Amplitudes are not the whole story, because the wave on the right has a different speed. The probability current for a wave ψ is

Text
j = (ħ / m) Im( ψ* dψ/dx )

For a plane wave A e^{ikx}, this gives j = |A|² ħk / m: density times velocity, as you would expect. Define:

  • the reflection coefficient R = |r|² (reflected current / incident current),
  • the transmission coefficient T = (k₂ / k₁) |t|².

The factor k₂/k₁ is the ratio of speeds. A common mistake is to write T = |t|², which would not conserve probability. With the correct definition:

Text
R = ((k₁ - k₂) / (k₁ + k₂))²
T = 4 k₁ k₂ / (k₁ + k₂)²
R + T = 1

The sum is exactly 1: every particle is either reflected or transmitted. Check by expanding: (k₁ - k₂)² + 4k₁k₂ = (k₁ + k₂)².

Classically, a particle with E > V₀ always continues over the step (slowing down). The quantum answer has R > 0: there is a chance of reflection even though the particle has more than enough energy. This partial reflection happens because the wavelength changes abruptly, as for light at an interface. It occurs for a downward step too (V₀ < 0).

Case 1: E > V₀

Let E = 2V₀. Then k₂ / k₁ = √((E - V₀) / E) = √(1/2) ≈ 0.707, and

Text
R = ((1 - 0.707) / (1 + 0.707))² ≈ 0.029

so about 3% of the particles are reflected. When E is far above V₀, k₂ ≈ k₁ and R → 0: the step is invisible to a very energetic particle. When E is just above V₀, k₂ → 0 and R → 1.

Case 2: E < V₀

Now the region x > 0 is classically forbidden. The wave number there becomes imaginary: k₂ = iκ with κ = √(2m(V₀ - E)) / ħ. The solution is

Text
ψ(x) = t e^{-κ x}      (x > 0)

with t = 2k₁ / (k₁ + iκ). Then r = (k₁ - iκ) / (k₁ + iκ), whose magnitude is exactly 1, so R = 1 and T = 0. There is total reflection, but the wave still penetrates the region x > 0 with an exponentially decaying tail of density |t|² e^{-2κx}. No current flows into the tail: the wave function there is real up to a constant phase, so j = 0. The reflected wave has a phase shift relative to the incident wave, much as light picks up a phase on total internal reflection.

Computing R and T

The first editor is a calculator that applies the formulas for any E / V₀. It prints a table and checks that R + T = 1 at every point, including the E < V₀ region where we use complex wave numbers.

Python Reflection and transmission vs. energy

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The wave near the step

The second editor draws the probability density |ψ(x)|² on both sides for E = 2V₀ and for E = 0.5V₀. For E = 2V₀ you see ripples on the left from the interference of incident and reflected waves, and a smooth flat density on the right. For E = 0.5V₀ the ripples have full contrast (a standing wave, since |r| = 1) and the density decays in the forbidden region.

Python Probability density near a step

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A particle with E > V₀ meets a potential step. Quantum mechanics predicts

    The wavelength changes abruptly at the step, producing a reflected wave. R = ((k₁ − k₂)/(k₁ + k₂))² is nonzero unless k₁ = k₂.
  2. 2. Why does the transmission coefficient include the factor k₂/k₁?

    The current is proportional to |A|² times velocity (∝ k). Comparing currents requires the ratio of wave numbers.
  3. 3. For E < V₀ at a step of infinite width, what is the reflection coefficient R?

    k₂ is imaginary, so |r| = 1. All the probability current is reflected, even though the wavefunction leaks into the forbidden region as e^(−κx).
  4. 4. If E is very large compared with V₀, what happens to R?

    Then k₂ ≈ k₁, so r = (k₁ − k₂)/(k₁ + k₂) approaches 0.

Summary

  • At a potential step the Schrödinger equation gives plane waves on each side; matching ψ and ψ' at the step fixes r and t.
  • R = |r|² and T = (k₂/k₁)|t|² measure probability currents and always satisfy R + T = 1.
  • For E > V₀ there is still partial reflection, a wave effect with no classical analogue.
  • For E < V₀ the reflection is total (R = 1), but the wavefunction penetrates a distance of about 1/κ as an evanescent tail.

Next: Tunneling Through a Barrier