Skip to content
Tutorials Center
My learning

Topics

Lesson 36 of 38 · The Hydrogen Atom

Hydrogen Spectral Series: Lyman, Balmer, Paschen

Use the quantized energies of hydrogen to explain its spectral lines: the Rydberg formula, the Lyman, Balmer and Paschen series, series limits and selection rules.

Long before quantum mechanics existed, spectroscopists had noticed that hot hydrogen gas emits light only at specific wavelengths, with a neat pattern that no classical theory could explain. In 1885 the Swiss teacher Johann Balmer found a simple formula for the visible lines; in 1888 Johannes Rydberg generalized it. In 1913 Niels Bohr explained the pattern with a model of quantized orbits, and in 1926 Schrödinger's equation gave the same energies from a complete theory.

This lesson turns the energy levels E_n = −13.6 eV/n² into predicted wavelengths. You will learn the names of the series, what happens at the series limit and which transitions are allowed.

From energy levels to wavelengths

When an electron drops from a level n_i to a lower level n_f, the atom emits a photon carrying the energy difference:

Text
h f = E_{n_i} − E_{n_f} = 13.6 eV × ( 1/n_f² − 1/n_i² )

Since f = c/λ, in terms of the wavenumber 1/λ this is the Rydberg formula:

Text
1/λ = R_H ( 1/n_f² − 1/n_i² ),     n_i > n_f

The Rydberg constant for hydrogen is R_H ≈ 1.09678 × 10⁷ m⁻¹. For an infinitely heavy nucleus it would be R_∞ = 1.0973731568 × 10⁷ m⁻¹; for hydrogen the reduced mass multiplies it by 0.999456. Equivalently R_∞ = m_e e⁴ / (8 ε₀² h³ c), and hcR_∞ = 13.6057 eV.

Absorption is the reverse: an atom in level n_f can absorb exactly the same photon energies and be lifted to n_i. That produces dark lines in a continuous spectrum (the Fraunhofer lines in sunlight include the hydrogen lines).

The named series

Each choice of the final level defines a series, named after its discoverer:

Final level n_f Name Region
1 Lyman ultraviolet
2 Balmer visible and near ultraviolet
3 Paschen infrared
4 Brackett infrared
5 Pfund far infrared

Within a series the lines are labeled with Greek letters in order: Lyman-α (2 → 1), Lyman-β (3 → 1), ... and Balmer-α, also called Hα (3 → 2), Hβ (4 → 2), Hγ (5 → 2), Hδ (6 → 2).

As n_i → ∞ the lines crowd closer together and converge to the series limit, 1/λ = R_H/n_f². Beyond the limit, the electron is free, and any extra photon energy appears as the electron's kinetic energy, giving a continuous spectrum. The limit of the Lyman series, about 91 nm, corresponds to ionization from the ground state: the energy needed to remove the electron is 13.6 eV.

The Balmer series is the one visible to the eye because its lines run from about 656 nm (red, Hα) through 486 nm (blue-green, Hβ) to 434 nm (violet, Hγ) and 410 nm (violet, Hδ), converging at about 365 nm in the near ultraviolet. The values listed here are close to the measured wavelengths of the lines in air. (Values in vacuum are slightly longer: for Hα about 656.47 nm in vacuum against 656.28 nm in air, because the refractive index of air is slightly above 1. Many tables quote air wavelengths.)

Selection rules

Not every pair n_i → n_f can produce a photon in one step. For the ordinary (electric dipole) emission the rules are

Text
Δl = ±1,      Δm = 0, ±1

The photon carries angular momentum ħ, and parity must change, so the orbital quantum number of the electron must change by exactly one. Examples: 3p → 2s (that is Hα, one of its components), 2p → 1s (Lyman-α) and 3d → 2p are allowed; 2s → 1s is forbidden as a single-photon transition (Δl = 0), and the 2s state is metastable, with a lifetime of the order of a tenth of a second, compared with about a nanosecond for 2p. Real hydrogen lines are also split into closely spaced components by fine structure (the corrections you met in the previous lessons), so a modern spectrograph resolves what looks like one line into several. We ignore that here.

A very important distinction: the energies depend only on n (in the simple theory), but which transitions occur is governed by l. Both facts together determine the spectrum.

Computing the series

The first editor computes the wavelengths from the Rydberg formula, using R_H built from the CODATA constants and the reduced mass. It prints the Balmer, Lyman and Paschen lines and series limits, and cross-checks one line using the energy formula E = hc/λ.

Python Wavelengths of hydrogen series

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The first line of the Balmer row, at about 656.5 nm, is the red Hα line. The series limits (91.2 nm, 364.7 nm, 820.6 nm, ...) show the pattern n_f²/R_H.

Drawing the spectrum

The second editor draws the Balmer lines as colored vertical lines over a wavelength axis, using an approximate wavelength-to-color mapping (an illustration; real colors depend on the display and eye). It also marks the series limit where the lines pile up.

Python The Balmer series as a spectrum

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Why this was important

Classical physics predicts that an electron orbiting a nucleus continuously radiates, spirals inward and gives a continuous spectrum. The observation of sharp lines at exactly the wavelengths given by 13.6 eV (1/n_f² − 1/n_i²) was one of the strongest hints of quantization. The same technique is used in astronomy: the hydrogen lines identify hydrogen in stars and, through the shift of the wavelengths, give velocities and the redshifts of distant galaxies (the Doppler shift of the lines is measured against the laboratory values).

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Which transition produces the Balmer-α (Hα) line?

    Balmer lines end on n = 2. The first one, Hα, starts from n = 3, giving about 656 nm (red).
  2. 2. In the Rydberg formula 1/λ = R(1/n_f² − 1/n_i²), what happens as n_i → ∞ within a series?

    The line positions approach 1/λ = R/n_f², the energy needed to ionize from level n_f.
  3. 3. Which one-photon (electric dipole) transition is forbidden?

    The dipole selection rule is Δl = ±1. For 2s → 1s, Δl = 0.
  4. 4. The Lyman series limit corresponds to which energy?

    Photons at the limit carry 13.6 eV, exactly enough to free the electron from n = 1. (10.2 eV is the Lyman-α photon.)

Summary

  • A transition n_i → n_f emits a photon with 1/λ = R_H (1/n_f² − 1/n_i²), with R_H ≈ 1.0968 × 10⁷ m⁻¹.
  • The series are Lyman (n_f = 1, ultraviolet), Balmer (2, visible), Paschen (3, infrared), Brackett (4) and Pfund (5).
  • Lines converge to a series limit; the Lyman limit corresponds to the 13.6 eV ionization energy.
  • Electric-dipole transitions require Δl = ±1; 2s → 1s is forbidden for one photon.
  • Fine structure splits each line into closely spaced components.

Next: Hydrogen Orbitals and Quantum Numbers