Skip to content
Tutorials Center
My learning

Topics

Lesson 6 of 38 ยท Why Quantum Mechanics

The Photoelectric Effect

Learn what the photoelectric effect shows about light, apply Einstein's equation K = hf - phi, and simulate how stopping voltage reveals Planck's constant.

When light shines on a clean metal surface, electrons can be knocked out. This is the photoelectric effect. Its behavior is so different from what wave theory predicts that Einstein, in 1905, proposed that light itself comes in discrete packets of energy, later named photons. (He received the 1921 Nobel Prize for this work.)

The experiment

A metal plate (the emitter) sits in an evacuated tube facing a second electrode (the collector). Light hits the emitter, and a sensitive meter measures the current of ejected electrons (photoelectrons). A variable voltage between the electrodes can push the electrons back. The stopping potential Vโ‚€ is the reverse voltage at which the current drops to zero; it measures the maximum kinetic energy: K_max = e Vโ‚€.

What classical wave theory predicts, and what happens

Observation Classical wave expectation Actual result
Brighter light More energy per electron More electrons, same maximum energy
Frequency Irrelevant; just wait long enough Below a threshold frequency fโ‚€, no electrons at all
Delay Energy accumulates, so a delay Emission starts almost instantly (under 1 ns)
Higher frequency No effect on maximum energy Maximum energy rises linearly with f

A wave spread over a large area should share energy among many electrons and slowly heat them. It cannot explain a sharp cutoff in frequency, or instant emission even in dim light.

Einstein's explanation

Light of frequency f consists of photons, each with energy E = h f. One photon gives all its energy to one electron. The electron must pay an energy cost to escape the metal, the work function ฯ†. Whatever is left becomes kinetic energy:

K_max = h f - ฯ†

  • If h f < ฯ†, no electron escapes: the threshold frequency is fโ‚€ = ฯ† / h.
  • Doubling the brightness doubles the number of photons, so the number of electrons, but not each photon's energy.
  • Emission is instant because a single photon does the job.
  • A plot of K_max against f is a straight line with slope h and intercept -ฯ†. Millikan's careful 1914โ€“1916 measurements confirmed this line, though he had expected to disprove Einstein.

Typical work functions are of order 2 to 5 eV. Alkali metals like cesium and sodium have low values (roughly 2 eV), while metals like platinum are higher (roughly 5 to 6 eV). The exact values depend on the surface condition and tabulation, so treat the ones below as approximate.

Python Photoelectric calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Note how brightness never appears in the code. Intensity changes the rate of emission but not K_max.

Recovering Planck's constant from a line fit

Here we simulate a measurement: the data below are not experimental; they are generated from the equation with a small random error, to show how an experimenter extracts h from a graph of stopping potential against frequency.

Since e Vโ‚€ = h f - ฯ†, plotting Vโ‚€ against f gives a line with slope h/e and intercept -ฯ†/e.

Python Simulated stopping-potential experiment (synthetic data)

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The fitted h lands within about 1% of the true value, and the line crosses zero at the threshold frequency.

What the photoelectric effect does and does not prove

It shows that the energy exchange between light and matter is quantized in units hf. It does not by itself require that free light is made of particles; a semiclassical treatment (quantum matter, classical field) can also reproduce the standard photoelectric results. Experiments with single photons (such as anti-bunching and certain correlation measurements) give the stronger evidence for photons. This is an honest nuance often skipped in introductory courses.

Photons have energy E = hf and momentum p = h/ฮป = E/c, but zero rest mass. The Compton effect (next lesson) shows the momentum directly.

Applications

Photodiodes, solar cells (a related internal photoelectric effect), digital camera sensors, night-vision tubes and photomultipliers all rely on photons ejecting or exciting electrons.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Below the threshold frequency, increasing the light intensity will

    Each electron absorbs one photon; if hf < ฯ†, no single photon can free it, however many arrive.
  2. 2. Einstein's photoelectric equation is

    The photon energy minus the escape cost gives the kinetic energy.
  3. 3. A photon of 3.0 eV hits a metal with ฯ† = 2.0 eV. What is K_max?

    K_max = 3.0 - 2.0 = 1.0 eV, so the stopping potential is 1.0 V.
  4. 4. On a graph of stopping potential versus frequency, the slope is

    e Vโ‚€ = hf - ฯ† gives Vโ‚€ = (h/e) f - ฯ†/e.

Summary

  • Light ejects electrons only above a threshold frequency fโ‚€ = ฯ†/h.
  • K_max = hf - ฯ†; intensity changes the number of electrons, not their maximum energy.
  • The Vโ‚€-versus-f line has slope h/e.
  • It shows that light-matter energy exchange is quantized; single-photon experiments give the fuller case for photons.

Next: Compton Scattering