Skip to content
Tutorials Center
My learning

Topics

Lesson 4 of 37 ยท Getting Started

Topographic Maps and Contour Lines

Learn to read contour lines, find slope and gradient, and draw an elevation profile from a topographic map, with plots you can run and change.

A topographic map shows the shape of the land using contour lines. Hikers, engineers and geologists use these maps to see hills, valleys, steep slopes and gentle plains at a glance. In this lesson you will learn the rules of contour lines, calculate gradients, and draw a profile of a hill.

What a contour line is

A contour line joins points of equal elevation (height above mean sea level). Imagine slicing a hill with horizontal planes at regular heights. Each slice's outline, seen from above, is a contour line.

The vertical gap between neighboring contour lines is the contour interval, for example 10 m. Every fifth line is usually drawn thicker and labeled with its elevation. These are index contours.

Rules for reading contours

  1. A contour line never splits and never crosses another one (except in a rare overhanging cliff).
  2. Contour lines close on themselves, though the loop may continue off the map edge.
  3. Close together = steep. Wide spacing = gentle slope.
  4. Evenly spaced lines = uniform slope.
  5. Concentric closed loops mean a hill or a pit. Pits (depressions) have small tick marks (hachures) pointing downhill.
  6. Contour lines form a V shape when they cross a stream. The V points upstream, toward higher ground.
  7. Between two lines of the same elevation, the ground may rise or fall: check the neighboring numbers.
flowchart LR
  A["Lines close together"] --> B["Steep slope"]
  C["Lines far apart"] --> D["Gentle slope"]
  E["Closed concentric loops"] --> F["Hill top inside"]
  G["V pointing uphill"] --> H["Stream valley"]

Quick guide to the main contour patterns.

Gradient and slope

The gradient (slope) between two points is the vertical change divided by the horizontal distance, both in the same unit.

gradient = (elevation change) / (horizontal distance)

You may quote it as meters per kilometer, a ratio, or a percent. Example: a rise of 200 m over 4 km is 50 m/km, which is 5% (200 / 4000 = 0.05).

Python Gradient calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Drawing an elevation profile

A profile is a side view along a line. To draw one, mark where the line crosses each contour, then plot elevation against distance. The example below uses made-up readings of a hill measured along a 2 km path. Pay attention to how the flat spots and steep parts show up.

Python Profile of a hill

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

A contour map you can make yourself

A computer can draw contours from a height function. Here a mathematical hill (a smooth bump) stands in for real terrain. Notice that the closely packed rings are where the hill is steepest.

Python Contours of a model hill

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Relief and other useful terms

  • Relief: the difference between the highest and lowest points in an area.
  • Elevation vs. depth: on sea charts, contours of depth are called isobaths.
  • Legend and scale: always check the interval, units and map scale before you read heights.
  • Magnetic declination: the angle between true north and the north your compass shows. Maps give it in the margin.

To tell uphill from downhill, look at the labeled index contours. The numbers increase toward the hilltop.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. What does it mean when contour lines are very close together?

    Close lines mean the elevation changes quickly over a short horizontal distance.
  2. 2. Which way do V-shaped contours point where they cross a stream?

    The V points upstream because the valley is cut into higher land in that direction.
  3. 3. A path rises 150 m over 3 km. What is its gradient in percent?

    150 / 3000 = 0.05, which is 5%.
  4. 4. What is the contour interval?

    It is the vertical spacing, for example 10 m, listed in the map legend.

Summary

  • Contour lines join points of equal elevation; the contour interval is the vertical spacing.
  • Close lines mean steep ground; wide spacing means gentle slopes; V shapes point upstream.
  • Gradient = rise / run and can be given as a ratio, a percent or an angle.
  • A profile plots elevation against distance along a line.

Next: Earth's Layers: Crust, Mantle and Core