Skip to content
Tutorials Center
My learning

Topics

Lesson 20 of 37 · Weathering, Erosion and Soil

Erosion and Deposition

See how water, wind, ice and gravity pick up, carry and drop sediment, how grain size sets what moves, and what landforms deposition builds.

Once weathering has loosened rock, something has to carry the pieces away. Erosion is the removal and transport of weathered material (sediment) by water, wind, ice or gravity. Deposition is where that material finally stops and settles. Together they carve valleys and build deltas, beaches, dunes and plains. Erosion and deposition are two halves of one journey, so a place that loses sediment in one spot always gains it somewhere else.

This lesson follows sediment from the source to the sink. You need the idea of weathering from the previous lesson.

The four agents of erosion

Agent How it moves sediment Typical landforms
Running water Carries material dissolved, suspended, or rolling along the bed River valleys, canyons, floodplains, deltas
Wind Lifts fine grains; sand hops along the ground Dunes, deflation hollows, loess plains
Glacial ice Plucks and scrapes rock; carries blocks of any size U-shaped valleys, moraines, fjords
Gravity Pulls material downslope (mass wasting) Landslides, talus slopes, creep

Water is the most powerful agent overall. Even a small stream, working over thousands of years, can cut a deep valley.

How rivers carry sediment

A river moves its load in three ways:

  • Dissolved load: ions from chemical weathering, invisible in the water.
  • Suspended load: fine silt and clay carried within the flow. This is why rivers can look brown after rain.
  • Bed load: sand, gravel and cobbles that roll, slide or bounce along the bottom. Only fast floods move the biggest pieces.

Faster, deeper water carries more and larger sediment. When the flow slows, the biggest particles drop first. This sorting is how you can read a deposit: well-sorted sand points to steady, selective flow; a jumble of sizes points to a sudden, powerful event.

Grain sizes

Geologists classify sediment by diameter (the Wentworth scale, rounded here):

Name Diameter
Clay below about 0.004 mm
Silt about 0.004 to 0.06 mm
Sand 0.06 to 2 mm
Gravel (pebbles, cobbles, boulders) above 2 mm

(Soil scientists use slightly different limits, which you meet in the soil lessons.)

Settling speed: why small grains stay afloat

For tiny spherical particles in slowly moving water, Stokes' law gives the settling speed:

v = (2/9) × (ρ_particle − ρ_fluid) × g × r² / μ

Here r is the radius (m), g = 9.81 m/s², ρ is density (kg/m³) and μ is the fluid's viscosity (about 0.001 Pa·s for water near 20 °C). Because of the r² term, doubling the radius makes a grain settle four times faster. The law only works for small Reynolds numbers, so treat it as valid for clay, silt and very fine sand, not for pebbles.

Python Stokes' law: how fast do grains settle?

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The result is striking: a 2 µm clay particle needs about three days to sink one meter in still water, which is why muddy water takes so long to clear and why clay is carried all the way to the ocean.

Wind and ice

Wind can only move small grains. Sand hops along the surface in a bouncing motion called saltation and builds dunes. Dust-sized silt can be lifted high and carried for thousands of kilometers; thick deposits of wind-blown silt are called loess.

Glaciers are slow, but they move everything. A glacier's deposit, called till, is unsorted: clay, sand and boulders mixed together. Meltwater streams from the glacier then sort part of it into layered outwash. Ridges of till left at the glacier's edge are moraines.

Gravity: mass wasting

Gravity acts even without a moving fluid. Rockfalls, landslides, mudflows and the slow downhill movement called creep are all mass wasting. Water makes it worse: it adds weight and reduces friction between grains, which is why many landslides follow heavy rain. The steepest stable slope of loose, dry grains is called the angle of repose (roughly 30° to 35° for dry sand).

Where sediment ends up: deposition landforms

  • Delta: where a river enters a lake or sea, slows down and drops its load.
  • Alluvial fan: a cone of sediment where a mountain stream spills onto flat land.
  • Floodplain: flat land beside a river, built by sediment left during floods.
  • Beach and sandbar: waves and currents sort and deposit sand.
  • Dune: hills of wind-blown sand.
  • Moraine and outwash plain: glacial deposits.

Over millions of years, deposited sediment is buried and turned into sedimentary rock, which you read about in the rocks and minerals chapter.

Python Soil loss: how thick a layer is removed?

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

flowchart LR
    A["Weathering<br/>(loosens rock)"] --> B["Erosion<br/>(picks up)"]
    B --> C["Transport<br/>(water, wind, ice, gravity)"]
    C --> D["Deposition<br/>(settles)"]
    D --> E["Burial and rock formation"]

The sediment journey from source to sink.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What is the difference between weathering and erosion?

    Weathering happens in place. Erosion removes and carries the pieces away.
  2. 2. A river slows down as it enters the sea. What happens to its load?

    Slower water cannot carry as much, so sediment settles out and builds a delta.
  3. 3. According to Stokes' law, if a grain's radius doubles (same material), its settling speed becomes

    Speed is proportional to r², so doubling r gives 2² = 4 times the speed.
  4. 4. Which deposit is unsorted, with boulders mixed with clay?

    Ice carries everything together and drops it unsorted, forming till.

Summary

  • Erosion transports sediment; deposition drops it where the energy of the water, wind or ice falls.
  • Rivers carry dissolved, suspended and bed loads; faster flow moves bigger grains.
  • Small grains settle very slowly (Stokes' law: speed depends on r²).
  • Wind forms dunes and loess; glaciers leave unsorted till and moraines; gravity drives mass wasting.
  • Deltas, fans, floodplains, beaches and dunes are built by deposition.

Next: Soil Formation and Horizons