Skip to content
Tutorials Center
My learning

Topics

Lesson 11 of 37 ยท Layers and Selections

Blend Modes and Opacity

Understand Photoshop blend modes by group, see the maths behind Multiply, Screen and Overlay, and learn practical recipes for shadows, glows and texture.

A blend mode decides how a layer's colours combine with the colours beneath it. With Normal, the top layer simply covers the ones below (fading with opacity). With the other modes, each pixel's value is mixed with the pixel underneath by a formula, which can darken, lighten, add contrast or invert. Blend modes turn a flat photo into a glowing sunset, a shadow into a believable shadow and a paper texture into a printed look, all without painting a stroke.

Photoshop is not available on this site, so you will apply these in your own copy. The stand-ins below implement the main formulas, simplified to a single grey channel with values from 0 (black) to 1 (white), so you can see the maths.

Where to find blend modes

The blend mode menu sits at the top left of the Layers panel (the default reads Normal). Painting tools and many commands have their own Mode menu in the options bar, using the same list. With the Move tool selected, Shift + + and Shift + - cycle through modes, which is a quick way to try them all. The same tools and layers also respond to the Opacity slider, which fades the effect of the mode.

The mode groups

The list is divided by lines into groups, and knowing the groups is more useful than memorising each mode.

  • Normal group: Normal and Dissolve (random pixel dithering at partial opacity).
  • Darken group: Darken, Multiply, Color Burn, Linear Burn, Darker Color. Results are always as dark or darker than the base. White has no effect.
  • Lighten group: Lighten, Screen, Color Dodge, Linear Dodge (Add), Lighter Color. Results are as light or lighter. Black has no effect.
  • Contrast group: Overlay, Soft Light, Hard Light, Vivid Light, Linear Light, Pin Light, Hard Mix. They darken darks and lighten lights, raising contrast. 50% grey has no effect in the most common ones.
  • Comparative group: Difference, Exclusion, Subtract, Divide. They compare the layer with the base: Difference is useful to align two similar images.
  • Component group: Hue, Saturation, Color, Luminosity. They take one aspect (hue, saturation, brightness) from the top layer and keep the rest of the base.

Four families

Darken Multiply. White disappears.
Lighten Screen. Black disappears.
Contrast Overlay and Soft Light.
Component Color and Luminosity.

Pick a family first, then a mode.

1 / 2

The formulas

Let b be the base value and t the top (blend) layer value, both between 0 and 1.

  • Multiply: b * t. Anything times white (1) stays the same, anything times black is black. Like stacking two slides on a light box.
  • Screen: 1 - (1 - b) * (1 - t). The opposite of Multiply: like projecting two slides on one screen. Black leaves things unchanged.
  • Overlay: if the base is dark (b < 0.5): 2 * b * t; otherwise 1 - 2 * (1 - b) * (1 - t). It multiplies the darks and screens the lights, so contrast increases and the top layer's brightness decides how strongly.
  • Soft Light: a gentler version of Overlay. Photoshop's exact formula is more complex; one widely used approximation is shown below.
  • Difference: |b - t|. Identical pixels give black.

The stand-in prints these formulas for a few pairs.

JS Stand-in: blend formulas

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Look at the rows with top = 0.5: Multiply halves the base, Screen brightens it, and Overlay and Soft Light return the base unchanged (0.2, 0.5, 0.8 stay as they are). That is the "50% grey is neutral" property used by dodge-and-burn layers.

Practical recipes

  1. Realistic shadows and darkening: put a new layer above, paint with a soft black or dark brush at low opacity, and set the mode to Multiply. Photos of paper or printed textures also sit nicely in Multiply, since white paper vanishes.
  2. Glows, light leaks and lens flares: use a black-background flare image in Screen, which makes black transparent.
  3. Contrast and punch: duplicate the photo (Ctrl/Cmd + J) and set the copy to Soft Light or Overlay, then lower opacity. A desaturated copy gives contrast without changing colour intensity.
  4. Dodge and burn without damage: create a layer filled with 50% grey in Soft Light (or Overlay), then paint with white to lighten and black to darken at low opacity. The grey itself is neutral. (A 50% grey layer is made via Layer > New > Layer with the mode and "Fill with Soft-Light-neutral color".)
  5. Recolouring: paint colour on a new layer set to Color, which applies the hue and saturation of your paint to the luminosity of the photo beneath. Useful for changing the colour of a shirt or hair.
  6. Sharpen only brightness: a high-pass layer in Overlay or Soft Light, or set a sharpening layer to Luminosity to avoid colour fringes.
  7. Align two shots: set the top layer to Difference; where they match you see black.

You can also use Blend If sliders in Layer Style > Blending Options to hide the darkest or lightest tones of a layer, useful for dropping a flare onto an image without a mask.

Opacity and blend modes together

Opacity scales the whole effect: the final value is a mix between the base and the blend result. At 0% you see only the base. The stand-in below shows the mixing step.

JS Stand-in: opacity of a blend

Press Run (or Ctrl + Enter) to see the console output here.

No output.

With top = 0.3 over base = 0.6, Multiply darkens to 0.18 and Screen lightens to 0.72 at 100%. At 0% both return the base 0.6. Photoshop applies the same idea to every colour channel (and, in the Color, Hue, Saturation and Luminosity modes, to the colour components).

Tips for working with blend modes

  • Try several modes quickly with Shift + + and Shift + -, then choose by eye. Do not agonise over the names.
  • Blend modes affect everything below a layer unless you clip it. Clipping (Alt/Option-click the line between two layers, or Ctrl/Cmd + Alt/Option + G) confines a layer's effect to the layer directly beneath it.
  • Layers inside a group blend within the group first (when the group is set to its default, Pass Through, they blend with everything beneath). Set a group to Normal to isolate its contents.
  • A mode on a painting tool (like a brush in Color mode) changes the pixels permanently, while a layer in that mode is non-destructive. Prefer layers.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Which blend mode makes white areas of the top layer disappear?

    Multiply gives b * 1 = b, so white has no effect and everything else darkens.
  2. 2. Which value is neutral (no change) for Overlay and Soft Light?

    A top value of 0.5 leaves the base unchanged in those modes.
  3. 3. A flare image on a black background should keep only its bright parts. Which mode?

    Screen leaves the base unchanged where the top layer is black.
  4. 4. Which mode applies the hue and saturation of the top layer to the brightness of the base?

    Color keeps the base luminosity and replaces hue and saturation.

Summary

  • Blend modes combine a layer with what lies beneath it; the modes fall into darken, lighten, contrast, comparative and component groups.
  • Multiply = b * t, Screen = 1 - (1 - b)(1 - t); Overlay multiplies darks and screens lights.
  • 50% grey is neutral in Overlay and Soft Light, enabling non-destructive dodge and burn.
  • Opacity blends between the base and the mode's result.
  • Use layers (not tool modes) so everything stays editable.

Next: Transforming, Cropping and Canvas Size