Skip to content
Tutorials Center
My learning

Topics

Lesson 17 of 37 ยท Retouching and Adjustments

Colour Correction: Hue, Saturation and Colour Balance

Correct colour casts and shift colour in Photoshop with Hue/Saturation, Vibrance, Color Balance, Photo Filter and Black and White, with HSL maths you can run.

Tone adjustments control how bright a picture is; colour adjustments control what colours it shows. A photo can have the right brightness and still look wrong: too blue from shade, yellow from indoor lamps, or washed out. Photoshop's colour tools let you neutralise a cast, boost or tame colours, shift one colour into another and make black-and-white conversions.

Photoshop is not available on this site, so follow the steps in your own copy. The stand-ins convert between RGB and HSL and apply the same kinds of shifts so that you can see what hue and saturation numbers mean.

Hue, saturation and lightness

Colour can be described as three properties, the HSL model used by Photoshop's Hue/Saturation dialog:

  • Hue: the colour itself, as an angle on a wheel from 0 to 360 degrees. Red is 0, yellow 60, green 120, cyan 180, blue 240, magenta 300.
  • Saturation: how intense the colour is, from grey (0%) to fully vivid (100%).
  • Lightness: from black (0%) through the pure colour (50%) to white (100%).

Understanding the wheel also tells you what opposite colours do: a blue cast is removed by adding yellow, a green cast by adding magenta. Color Balance and Curves use this relationship.

Describing colour

Hue Which colour, as an angle.
Saturation How strong or grey.
Lightness How dark or light.

Opposite colours cancel each other.

1 / 2

Hue/Saturation

Image > Adjustments > Hue/Saturation (Ctrl/Cmd + U; use an adjustment layer in practice) offers:

  • Master (all colours) or a single range from the menu: Reds, Yellows, Greens, Cyans, Blues, Magentas.
  • Hue slider (-180 to +180): rotates colours around the wheel.
  • Saturation slider (-100 to +100): -100 gives greyscale.
  • Lightness slider.
  • A Colorize checkbox turns the image to one hue (a tinted monochrome, like sepia).
  • The targeted adjustment hand: click and drag on the picture to change the colour under the cursor. Drag left or right to change saturation, and with Ctrl/Cmd held down to change hue.

Two colour bars at the bottom show the original and adjusted wheel. When you choose a single range, extra sliders appear to widen or narrow it (the fall-off). Use this to turn a red jacket green without touching skin tones, or to deepen only the blue of a sky.

Vibrance

Vibrance (Image > Adjustments > Vibrance) is a smarter saturation. It boosts muted colours more than colours that are already strong, and it protects skin tones (as an option) so people do not turn orange. The Saturation slider inside it behaves like the plain version. For a gentle, natural lift, try Vibrance first.

Color Balance

Color Balance (Ctrl/Cmd + B) has three sliders: Cyan-Red, Magenta-Green and Yellow-Blue, and lets you pick whether to adjust Shadows, Midtones or Highlights. Keep Preserve Luminosity on so brightness does not shift. Fix a blue cast in the shadows by moving Yellow-Blue towards yellow, and warm a sunset by moving highlights towards red and yellow. It is the intuitive tool for colour grading and cast removal.

Other colour tools

  • Photo Filter: a coloured lens filter (Warming 85, Cooling 80, or a custom colour) with a Density slider. Fast for warming up or cooling down.
  • Black & White: converts to greyscale with per-colour sliders (Reds, Yellows, Greens...), so you can lighten a red rose or darken a blue sky. Tick Tint for toned looks.
  • Channel Mixer: control what each output channel is built from; a classic route to black and white or custom colour effects.
  • Selective Color: adjust the CMYK balance of specific colour families (Reds, Whites, Neutrals...). Good for refining skin tones and print colours.
  • Replace Color: select a colour and shift it in one dialog.
  • Match Color: make one image's colours resemble another.
  • Curves in the RGB channels: neutralise a cast by clicking the grey eyedropper on something that should be neutral grey (a card or a grey wall), or by adjusting the individual red, green and blue curves.
  • Camera Raw (as a filter) has White Balance (temperature and tint), Vibrance, HSL / Color Mixer and Color Grading panels.

To remove a colour cast quickly: add a Curves layer, click the middle (grey) eyedropper, then click something that should be neutral. If the result looks worse, undo and pick a different spot.

What these sliders do mathematically

This stand-in converts RGB to HSL and back, which is the maths a Hue/Saturation adjustment is built on. It is a simplified sketch, not Photoshop's own implementation (Photoshop adds range fall-offs and colour management).

JS Stand-in: RGB to HSL and back

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Adding 120 degrees to a red hue gives green, adding 240 gives blue, and taking saturation to 0 leaves a neutral grey of the same lightness. That is what the Hue and Saturation sliders do for every pixel in the chosen range.

Neutralising a cast

A colour cast means the three channel averages differ although the scene should be neutral. A common auto-correction, called the grey world method, scales each channel so their averages match. Photoshop's Auto Color is more sophisticated, but the idea of balancing channels is the same. This stand-in applies it to a few samples of a bluish scene.

JS Stand-in: grey-world white balance

Press Run (or Ctrl + Enter) to see the console output here.

No output.

The blue average is much higher than red before the fix, so the gains lower blue and raise red until the three averages agree. Real photos can have genuine colour (a green meadow), so the grey-world assumption fails there, which is why a manual eyedropper on a known neutral is often better.

Practical workflow

  1. Fix tone first (Levels or Curves), then colour.
  2. Correct any cast (grey eyedropper or Color Balance), then tune vibrance.
  3. Use range-specific Hue/Saturation for local colour fixes, and masks on the adjustment layers for area fixes.
  4. Compare with the original often (toggle the eye on the adjustment layers) and stop before skin turns orange.
  5. Use View > Proof Colors if the final output is print.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. On the colour wheel, which colour cancels a blue cast?

    Yellow is opposite blue; adding it to a blue-cast area neutralises it.
  2. 2. How does Vibrance differ from Saturation?

    Vibrance is a smarter, gentler saturation boost.
  3. 3. What does the Colorize checkbox in Hue/Saturation do?

    Colorize applies one hue to the whole image, for a tinted monochrome look.
  4. 4. Which sequence is usually best?

    Tone changes affect how colour looks, so set tone first and then judge colour.

Summary

  • HSL describes colour: hue (angle), saturation (intensity), lightness.
  • Hue/Saturation, Vibrance and Color Balance are the main colour tools; Photo Filter, Black & White and Selective Color cover special jobs.
  • Opposite colours cancel: yellow fixes blue, magenta fixes green.
  • A neutral eyedropper in Curves is a fast cast remover.
  • Do tone first, colour second, and use adjustment layers.

Next: Adjustment Layers and Non-Destructive Editing