Skip to content
Tutorials Center
My learning

Topics

Lesson 31 of 37 ยท Automation and Export

Print, Color Management and Soft Proofing

Prepare Photoshop files for print: resolution, bleed, RGB vs CMYK, ICC profiles, soft proofing, the Print dialog and PDF export, with simple calculators.

Screens glow; paper reflects. The same file can look very different in each, and printing adds new concerns: resolution, bleed, ink and paper. This lesson explains how to set up and export files for print and how Photoshop keeps colors predictable.

Resolution for print

Print quality depends on pixels per inch (ppi) at the final size. Typical targets:

  • 300 ppi for magazines, brochures and photos viewed up close.
  • 150-200 ppi for large posters viewed from a distance.
  • 72-100 ppi can be enough for billboards seen from far away.

The number of pixels you need is inches x ppi. A 6 x 4 inch print at 300 ppi needs 1800 x 1200 pixels. If your image is smaller, you can resample up (Image > Image Size, Resample: Preserve Details 2.0 uses AI-based upscaling in recent versions), but real detail cannot be invented.

Python Stand-in: pixels needed for a print size

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Bleed, trim and safe area

Printers cut sheets after printing, and the cut is never perfect. To avoid thin white edges, extend the background beyond the trim line by the bleed, usually 3 mm (0.125 inch) on each side. Keep important text and logos inside a safe area, typically 3-5 mm inside the trim.

In Photoshop, create the document at the trim size plus bleed on every side, for example an A5 flyer (148 x 210 mm) needs 154 x 216 mm. Add guides at the trim and safe positions (View > New Guide Layout helps). Export with crop marks only if your printer asks for them.

Color modes and profiles

  • RGB is how screens mix light. Most cameras and monitors use it.
  • CMYK (cyan, magenta, yellow, black/key) is how presses mix ink. It has a smaller gamut: very saturated greens, blues and oranges cannot be printed.
  • A color profile (ICC) describes how numbers map to real colors for a device or standard. Common ones: sRGB (web), Adobe RGB (1998) (wide gamut), ProPhoto RGB (very wide), U.S. Web Coated (SWOP) v2 and Coated FOGRA39/FOGRA51 (CMYK presses).

Ask the printer which CMYK profile they use. Many photo labs, and some online printers, want RGB (usually sRGB) and convert for you.

Converting the right way

  • Edit > Assign Profile only changes the label; the numbers stay the same and the colors change. Use it to fix a missing or wrong tag.
  • Edit > Convert to Profile changes the numbers so that the color looks as similar as possible in the new profile. This is what you use to go from RGB to CMYK.
  • Image > Mode > CMYK Color does a conversion using the working profile defined in Edit > Color Settings.

Do your editing in RGB, where all filters and adjustments are available and the gamut is larger, then convert to CMYK once at the end on a copy.

Python Stand-in: a NAIVE RGB to CMYK formula

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

This formula is useful for understanding the idea (K takes the darkness, CMY the color), but it ignores the paper, the ink and the gamut. Always use Photoshop's profile conversion for real work.

Soft proofing

A soft proof shows on screen how the file will look when printed:

  1. View > Proof Setup > Custom and choose the printer/paper profile (for example Coated FOGRA39).
  2. Tick Simulate Paper Color and Simulate Black Ink to see the dull whites and weak blacks of paper (they look duller on purpose).
  3. Toggle with Ctrl+Y and compare.
  4. View > Gamut Warning (Ctrl+Shift+Y) paints out-of-gamut colors gray.

If colors shift, fix them with Hue/Saturation or Selective Color adjustment layers on top of the image. Use a Proof Setup working only for viewing; keep the file's own profile unchanged.

Printing from Photoshop

File > Print (Ctrl+P) shows a preview and these settings:

  • Printer and its settings (paper size, quality).
  • Color Management: choose Photoshop Manages Colors and select the printer/paper profile and a Rendering Intent: Relative Colorimetric (with Black Point Compensation) for most photos; Perceptual for very saturated images.
  • Position and Size: fit to media or a custom scale.
  • Printing Marks and bleed for commercial output.

When the printer driver also manages colors, you get a double conversion and wrong colors. Turn color management off in one place only.

Exporting PDF for a print shop

File > Save As > Photoshop PDF and choose a preset like High Quality Print or Press Quality (or PDF/X-1a / PDF/X-4, standards print shops like). Check:

  • Compression: ZIP or JPEG at maximum quality, no downsampling.
  • Output: the color conversion and profile requested by the printer.
  • Marks and bleeds: crop marks if requested and Use document bleed settings.

Simple photo books and lab orders may want a flattened TIFF or high-quality JPEG in sRGB instead. Always ask.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. How many pixels wide must a 10-inch-wide print be at 300 ppi?

    10 inches x 300 ppi = 3000 pixels.
  2. 2. What is bleed?

    Bleed (usually 3 mm) lets the cut be slightly off without leaving white edges.
  3. 3. Which command changes numbers so colors look similar in a new profile?

    Convert to Profile recalculates values for the destination profile. Assign Profile only relabels the existing numbers.
  4. 4. What is the purpose of soft proofing?

    Soft proofing simulates the paper and ink profile so you can fix problem colors before printing.

Summary

  • Plan pixels from final print size and ppi; add bleed and keep text in the safe area.
  • Edit in RGB, then convert to the printer's CMYK profile once, on a copy.
  • Soft proof and use the gamut warning before printing.
  • Let only one stage (Photoshop or the printer driver) manage color.

Next: Non-Destructive Workflows