Skip to content
Tutorials Center
My learning

Topics

Lesson 6 of 37 ยท Interface and Documents

Creating, Opening and Setting Up Documents

Create a new Photoshop document with the right size, resolution, colour mode and background, open and place existing files, and use artboards for multiple sizes.

Every project starts with a document, and the choices you make in the first dialog (size, resolution, colour mode, background) are hard to change later without side effects. Spend thirty seconds there and you avoid blurry exports and wrong-sized canvases. This lesson covers making new documents, opening and placing existing files, and using artboards.

Photoshop is not available on this site, so the steps describe your own copy. The stand-in code validates and converts document settings in the same way you would check them by eye.

The New Document dialog

Use File > New (Ctrl/Cmd + N). The dialog has preset tabs along the top, Recent, Saved, Photo, Print, Art & Illustration, Web, Mobile, Film & Video, and a settings panel on the right.

The important settings:

  • Width and Height with a unit (pixels, inches, centimetres, millimetres, points, picas). Choose the unit that matches the output: pixels for screens, inches or millimetres for print.
  • Orientation (portrait or landscape) and Artboards (checkbox, see below).
  • Resolution in pixels per inch. 72 is fine for screen work. Use 300 for print, as discussed in Pixels, Resolution and Image Size.
  • Color Mode and bit depth (RGB, 8 bit is the usual starting point for design; 16 bit for photographic editing).
  • Background Contents: White, Black, Background Color or Transparent. Transparent creates a document with no background layer, handy for logos and compositing.
  • Colour Profile and Pixel Aspect Ratio under Advanced Options. Keep sRGB and Square Pixels unless you have a reason not to.

You can save your favourite combination as a preset with the small save icon beside the preset name, and it appears under the Saved tab.

Before you click Create

Size Pixels for screens, inches for print.
Resolution 72 for screens, 300 for print.
Colour mode RGB 8-bit unless you know better.
Background White, colour or transparent.

Tick every box before you start painting.

1 / 2

Typical starting sizes

Job Common size
Web banner / hero 1920 x 1080 px
Social square post 1080 x 1080 px
Social story / vertical video 1080 x 1920 px
A4 print 210 x 297 mm at 300 PPI (2480 x 3508 px)
US Letter print 8.5 x 11 in at 300 PPI (2550 x 3300 px)
Business card 3.5 x 2 in plus bleed

Platforms change their recommended sizes over time, so check the current specification before you commit to a layout.

Checking the arithmetic

This stand-in converts a print size to pixels, estimates the memory of the empty document, and flags suspicious settings, which is exactly what a careful look at the New Document dialog does. It is plain JavaScript, not Photoshop.

JS Stand-in: document setup checker

Press Run (or Ctrl + Enter) to see the console output here.

No output.

The A4 result is 2480 x 3508 pixels, matching the table. The 24 x 36 inch CMYK 16-bit "mistake" would need almost 600 MB of memory for every full-size layer, which is why the checker complains. Catching that before you create the document saves a crash later.

Opening existing files

  • File > Open (Ctrl/Cmd + O) opens a file from disk. You can also drag files onto the Photoshop window, or double-click them in your file manager if Photoshop is the default.
  • File > Open Recent lists recently used files.
  • Raw files open first in Camera Raw, where you adjust exposure and colour, then press Open to continue in Photoshop (as a Smart Object if you hold Shift).
  • Files with an embedded colour profile that differs from your working space trigger a profile mismatch dialog. The safe default is to Use the embedded profile (instead of the working space). Choose Convert only if you know you want that.
  • File > Open as Smart Object keeps the original file linked inside the new document so you can scale it non-destructively.

Place Embedded and Place Linked

To add another image into an open document use File > Place Embedded (the file is copied inside your PSD and becomes a Smart Object) or File > Place Linked (the PSD keeps a reference to the external file, so edits to the original update everywhere, and the document stays smaller). A placed image appears with a transform box; press Enter to commit. We explore Smart Objects in Smart Objects and Layer Groups.

With Place Linked, moving or renaming the original file breaks the link. Keep linked files in a project folder next to the PSD.

Artboards

An artboard is a canvas inside the canvas. A single PSD can hold many artboards, such as a Facebook cover, an Instagram post and a website header, each with its own size and layers, which you can export in one go. Tick Artboards in the New Document dialog, or create them later with the Artboard tool (nested with the Move tool) or by selecting layers and choosing Layer > New > Artboard from Layers. Each artboard shows in the Layers panel as a group-like folder. Resize it from the options bar or the Properties panel. Remember that all artboards share the document's resolution and colour mode.

Document information and changes later

  • Image > Canvas Size changes the working area (more room or cropping), see Transforming, Cropping and Canvas Size.
  • Image > Image Size resamples the content.
  • Image > Mode changes colour mode and bit depth.
  • File > File Info stores title, author, copyright and keywords as metadata that exports can carry along.
  • File > Revert discards all changes since the last save.

Good habits

  1. Decide the output first (web, print, social), then choose size and resolution.
  2. Start large enough: shrinking later is safe, enlarging is not.
  3. Name layers and save early, then save a new version with Save As at milestones.
  4. Turn on Edit > Preferences > File Handling > Automatically Save Recovery Information (the default is ten minutes) so a crash costs little.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Which background setting gives a document with no background layer, handy for compositing?

    Transparent starts without a filled background layer.
  2. 2. How many pixels wide is an A4 page (210 mm) at 300 PPI?

    210 mm / 25.4 = 8.27 inches; times 300 PPI gives about 2480 pixels.
  3. 3. What is the difference between Place Embedded and Place Linked?

    Embedded files live inside the PSD, linked ones stay outside and update when the original changes.
  4. 4. What is an artboard?

    Artboards let one PSD contain several sized layouts that you can export together.

Summary

  • Choose size, resolution, colour mode and background carefully in File > New; save favourites as presets.
  • Use pixels for screens and physical units with 300 PPI for print.
  • Open files with File > Open; raw files go through Camera Raw; mind profile mismatch prompts.
  • Place Embedded copies a file inside the PSD; Place Linked references it.
  • Artboards let one document hold many sized designs.

Next: Zoom, Pan, Rulers and Guides