Skip to content
Tutorials Center
My learning

Topics

Lesson 15 of 37 ยท Aggregate Demand and Supply

The Spending Multiplier

Learn how an initial change in spending leads to a larger change in national income, how to calculate the multiplier from MPC or leakages, and its limits.

If a firm spends 100 million on a new factory, national income rises by more than 100 million. Why? Because the people who earn that 100 million will spend part of it, creating income for others, who spend part again. This chain reaction is called the multiplier effect.

The idea in rounds

Suppose households spend 80% of any extra income and save 20%. An injection of 100 creates income of 100 for builders. They spend 80, which becomes income for shopkeepers. The shopkeepers spend 64. And so on:

100 + 80 + 64 + 51.2 + ...

This is a geometric series with first term 100 and common ratio 0.8. Its sum is 100 / (1 โˆ’ 0.8) = 500. The total rise in income is 5 times the original injection.

Marginal propensities

  • Marginal propensity to consume (MPC): the fraction of an extra unit of income that is spent on consumption.
  • Marginal propensity to save (MPS): the fraction that is saved. Without taxes or imports, MPC + MPS = 1.

Formulas:

multiplier k = 1 / (1 โˆ’ MPC) = 1 / MPS

change in income = k ร— change in autonomous spending

With MPC = 0.8, MPS = 0.2 and k = 5. With MPC = 0.5, k = 2.

A more realistic multiplier

Income also leaks into taxes and imports. Let MPT be the fraction of extra income that goes in tax and MPM the fraction spent on imports. Then:

k = 1 / (MPS + MPT + MPM)

where each is a share of extra income. For example MPS = 0.15, MPT = 0.20 and MPM = 0.15 gives k = 1 / 0.5 = 2. The larger the leakages, the smaller the multiplier. Small open economies, where imports are a large share of spending, usually have smaller multipliers.

Bigger leakages, smaller multiplier

Saving Income not spent
Taxes Income to government
Imports Spending abroad
1 / 2

Calculating the multiplier

Python Multiplier from MPC and from leakages

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Watching the rounds add up

The simulation below adds up the rounds of spending and compares them with the formula.

JS Multiplier rounds versus the formula

Press Run (or Ctrl + Enter) to see the console output here.

No output.

The multiplier works both ways

A fall in spending has a negative multiplier effect. If investment falls by 20 and k = 5, income falls by 100. That is why a small drop in firms' confidence can cause a large downturn, and why governments may try to offset it.

Limits of the simple multiplier

  • Time lags. The rounds take time.
  • Spare capacity is needed. If the economy is already at full employment, extra spending raises prices instead of output.
  • Crowding out. Government borrowing may push up interest rates and reduce private investment.
  • Inflation and interest-rate responses. A central bank may raise rates and weaken the effect.
  • Expectations. If households expect higher taxes later, they may save more.
  • Leakages vary and are hard to measure, so real multipliers are uncertain, and economists disagree about their size.

Do not treat the formula as a precise forecast. It is a model of the mechanism. Real-world estimates of fiscal multipliers vary widely across countries and economic conditions.

The multiplier explains why the AD curve shifts by more than the initial change in spending. In the earlier lesson on shifts in aggregate demand our calculators ignored it. If an increase in government spending of 20 shifts AD right, the horizontal shift is k ร— 20, subject to the limits above. The effect on output also depends on whether the economy has spare capacity.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. MPC = 0.75. What is the multiplier?

    k = 1 / (1 - 0.75) = 1 / 0.25 = 4.
  2. 2. Investment rises by 30 and k = 3. Income rises by about...

    Change in income = k ร— change in spending = 3 ร— 30 = 90.
  3. 3. Which makes the multiplier smaller?

    More leakage to imports means less re-spending at home.
  4. 4. With MPS = 0.1, MPT = 0.2 and MPM = 0.2, k is...

    k = 1 / (0.1 + 0.2 + 0.2) = 1 / 0.5 = 2.

Summary

  • An initial change in spending is magnified through rounds of re-spending.
  • k = 1 / (1 โˆ’ MPC) = 1 / MPS in the simplest case; k = 1 / (MPS + MPT + MPM) with taxes and imports.
  • Bigger leakages mean a smaller multiplier.
  • It works in both directions, but real-world size is uncertain and limited by capacity, crowding out and expectations.

Next: Measuring Inflation with the CPI