Skip to content
Tutorials Center
My learning

Topics

Lesson 25 of 37 ยท Fiscal and Monetary Policy

The Fiscal Multiplier

Derive the spending and tax multipliers from the marginal propensity to consume, add taxes and imports, and see why real multipliers are smaller than textbook ones.

When the government spends an extra 100 million, national income rises by more than 100 million. The builder who is paid spends part of her income, which becomes income for a shopkeeper, who spends part of it, and so on. The total change in income relative to the first change in spending is the multiplier.

This lesson derives the multiplier, applies it to spending and taxes, and shows why real-world multipliers are smaller than the simple formula suggests.

The marginal propensity to consume

The marginal propensity to consume (MPC) is the fraction of an extra unit of income that households spend. The marginal propensity to save (MPS) is the fraction saved, so MPC + MPS = 1 when there are no taxes or imports. If MPC = 0.8, then out of every extra 100 earned, 80 is spent and 20 is saved.

The round-by-round story

Suppose government purchases rise by 100 and MPC = 0.8.

Round New spending Cumulative change in income
1 100.0 100.0
2 80.0 180.0
3 64.0 244.0
4 51.2 295.2

Each round is 0.8 times the last. The total is a geometric series:

100 ร— (1 + 0.8 + 0.8ยฒ + ...) = 100 / (1 - 0.8) = 500

So the simple spending multiplier is

multiplier = 1 / (1 - MPC) = 1 / MPS

With MPC = 0.8 the multiplier is 5, and 100 of extra spending raises equilibrium income by 500.

Python Multiplier round by round

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The tax multiplier

A tax cut does not add directly to spending. It raises disposable income, and households spend only a fraction MPC of it. The first-round effect of a tax change ฮ”T is -MPC ร— ฮ”T, so

tax multiplier = -MPC / (1 - MPC)

With MPC = 0.8, the tax multiplier is -0.8 / 0.2 = -4. A tax cut of 100 raises income by 400, which is less than the 500 from a spending rise of 100. A tax rise of 100 reduces income by 400.

The balanced budget multiplier

What if the government raises spending by 100 and taxes by 100 at the same time? The effect on income is 5 ร— 100 - 4 ร— 100 = +100. The balanced budget multiplier equals 1 (in this simple model): the budget stays balanced and income still rises by the amount of spending, because spending is counted in full while the tax lowers private spending only by the MPC share.

Python Spending, tax and balanced budget multipliers

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

A more realistic multiplier

Real economies leak part of each round of income out of the spending chain:

  • Taxes: if income tax is a share t of income, households keep only (1 - t) of each extra unit, and they spend MPC of that.
  • Imports: a share m of extra income is spent on imported goods, which creates income abroad, not at home.

The multiplier becomes

multiplier = 1 / (1 - MPC ร— (1 - t) + m)

Example: MPC = 0.8, t = 0.25, m = 0.1. Then MPC ร— (1 - t) = 0.6, and the denominator is 1 - 0.6 + 0.1 = 0.5. The multiplier is 2, far below the textbook 5.

Python Multiplier with taxes and imports

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

A small, open economy with high taxes and large imports (many European countries, for instance) has a smaller multiplier than a large, closed one.

Why real multipliers are smaller still

Several things reduce the effect even further:

  • Crowding out: government borrowing can push up interest rates, reducing private investment. Crowding out is weaker when the economy has spare capacity or when the central bank keeps rates low.
  • Rising prices: if the economy is near full employment, extra demand lifts prices instead of output, so real income rises less.
  • Expectations: if households expect higher taxes later to pay for the spending, they may save more now.
  • Time lags: spending arrives months after the downturn begins.

Empirical estimates of fiscal multipliers differ widely across countries and periods; they tend to be larger in deep recessions and when interest rates cannot fall further, and smaller in boom times. Treat the formulas in this lesson as models that teach the mechanism, not as precise forecasts.

Using the multiplier: closing a gap

Suppose an economy is 300 below its full-employment output (a recessionary gap) and the multiplier is 2. The government needs extra spending of 300 / 2 = 150. With a tax cut instead, it would need a larger package because the tax multiplier is smaller in size than the spending multiplier.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. MPC = 0.9. What is the simple spending multiplier?

    1 / (1 - 0.9) = 1 / 0.1 = 10.
  2. 2. With MPC = 0.75, what is the tax multiplier?

    -MPC / (1 - MPC) = -0.75 / 0.25 = -3.
  3. 3. Government spending and taxes both rise by 50 in the simple model. By how much does income change?

    The balanced budget multiplier is 1, so income rises by 50.
  4. 4. Why does a higher import share reduce the multiplier?

    Spending on imported goods creates income abroad, so less income circulates at home in each round.

Summary

  • The multiplier shows how a change in spending leads to a larger change in income, because one person's spending is another's income.
  • Simple spending multiplier: 1 / (1 - MPC); tax multiplier: -MPC / (1 - MPC); balanced budget multiplier: 1.
  • With income tax rate t and import share m: 1 / (1 - MPC(1 - t) + m).
  • Crowding out, price rises, expectations and lags make real multipliers smaller and uncertain.
  • Multipliers help estimate how large a stimulus must be to close an output gap.

Next: Budget Deficits and Public Debt