Skip to content
Tutorials Center
My learning

Topics

Lesson 22 of 37 ยท Money and Banking

The Money Multiplier

Follow a deposit through the banking system, calculate the simple and the realistic money multiplier, and learn why real-world multipliers are smaller.

When you deposit cash at a bank, the bank does not leave it in a vault. It keeps a fraction and lends the rest. The borrower spends the loan, the seller deposits it at a bank, and that bank lends most of it out again. One deposit turns into a chain of deposits. This is why economists say the banking system creates money.

This lesson builds the money multiplier step by step: first the textbook version, then a more realistic one.

The reserve ratio

The reserve ratio r is the fraction of deposits a bank keeps as reserves instead of lending. It may be set by law (a required reserve ratio) or chosen by the bank. Reserves are cash in the vault plus the bank's balance at the central bank.

If r = 0.10 (10 percent), a bank holding a deposit of 1,000 keeps 100 and can lend 900.

Following the deposit

Start with a new deposit of 1,000 and r = 0.10, and assume that every loan is spent and re-deposited in full.

Round New deposit Kept as reserve Lent out
1 1,000.00 100.00 900.00
2 900.00 90.00 810.00
3 810.00 81.00 729.00
4 729.00 72.90 656.10

Each round is 90 percent of the previous one. The total of all deposits is a geometric series:

1000 + 900 + 810 + ... = 1000 / (1 - 0.9) = 1000 / 0.10 = 10,000

So 1,000 of new reserves supports up to 10,000 of deposits. Of that, 1,000 was the original deposit and 9,000 is newly created money.

Python Round-by-round deposit expansion

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The simple formula

The simple money multiplier is

multiplier = 1 / r

and the maximum change in deposits is

change in deposits = (1 / r) ร— change in reserves

Reserve ratio r Multiplier 1/r 1,000 of reserves supports
0.05 20 20,000
0.10 10 10,000
0.20 5 5,000
0.25 4 4,000

A higher reserve ratio means banks lend less and the multiplier shrinks. The process also runs in reverse: if reserves fall by 1,000, deposits can contract by up to 10,000 when r = 0.10.

A more realistic multiplier

The simple formula overstates what happens, because it assumes two things that are not true:

  1. People hold no cash. In reality, part of each payment is kept as notes and coins, a currency drain. Let c be the ratio of currency held by the public to deposits.
  2. Banks lend every available cent. In reality, banks often keep excess reserves above the minimum. We fold these into r, so r becomes the total reserves-to-deposits ratio.

The money supply is M = currency + deposits. The monetary base B is currency plus reserves. Then

M = ((1 + c) / (c + r)) ร— B

With c = 0 this simplifies to 1 / r. With c = 0.2 and r = 0.1, the multiplier is 1.2 / 0.3 = 4, much less than 10.

Python Money multiplier calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Look at the rows. Currency drain cuts the multiplier sharply, and excess reserves (a higher r) cut it further. In a financial crisis, banks hoard reserves and people hold more cash, so the multiplier can fall a lot even when the monetary base rises.

What the textbook model leaves out

Modern central banks usually do not control the money supply by changing the amount of reserves directly. Many countries have very low or even zero reserve requirements. The United States, for example, set its requirement to zero in 2020, and some other countries have no reserve requirement at all. In practice banks make loans when they find a profitable borrower, creating the deposit at the moment of lending, and then look for the reserves they need. Central banks mainly steer lending by setting interest rates, a topic for the central bank lesson and for monetary policy.

The multiplier is still worth learning. It shows two true ideas: lending creates deposits, and a bank's lending is limited by how much risk and cost it can accept, and by rules about capital and liquidity.

When you solve an exam question on the money multiplier, check whether it mentions cash held by the public. If it does not, use 1 / r. If it does, use (1 + c) / (c + r).

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. The reserve ratio is 0.20. What is the simple money multiplier?

    Multiplier = 1 / r = 1 / 0.20 = 5.
  2. 2. A bank gets a new deposit of 2,000 and r = 0.25. What is the maximum total increase in deposits across the whole banking system?

    Multiplier = 1 / 0.25 = 4, so deposits can rise by up to 4 ร— 2,000 = 8,000. Of that, 6,000 is newly created money.
  3. 3. Why is the real-world multiplier usually smaller than 1 / r?

    Currency drain and excess reserves mean less of each loan comes back as new deposits, so the chain is shorter.
  4. 4. With c = 0.25 and r = 0.25, what is (1 + c) / (c + r)?

    (1 + 0.25) / (0.25 + 0.25) = 1.25 / 0.5 = 2.5.

Summary

  • Banks keep a fraction r of deposits as reserves and lend the rest; loans return to the system as new deposits.
  • Simple multiplier: 1 / r. New reserves of R support up to R / r in deposits.
  • Realistic multiplier: (1 + c) / (c + r), with c the currency-to-deposit ratio and r total reserves to deposits.
  • Cash holding and excess reserves make the real multiplier smaller and less stable.
  • Many central banks today steer lending through interest rates rather than strict reserve control.

Next: Central Banks and the Money Supply