Skip to content
Tutorials Center
My learning

Topics

Lesson 30 of 36 · Surfaces and the Fundamental Group

Surfaces and Manifolds

Define manifolds and surfaces by local charts, build the sphere from two stereographic charts, and test whether a polygon gluing word is orientable.

A surface is a space that, up close, looks like a piece of the plane. The Earth is round, yet a small map of your town is nearly flat. The torus and the Möbius band behave the same way. Topologists make this precise with the idea of a manifold: a space that is locally the same as ℝⁿ. Surfaces are the case n = 2.

This lesson defines manifolds, constructs the sphere from charts, and introduces boundary words for polygons so you can read off basic properties of a surface.

Manifolds

A topological n-manifold is a space M such that

  1. Locally Euclidean: every point has an open neighborhood homeomorphic to an open subset of ℝⁿ;
  2. Hausdorff: distinct points have disjoint neighborhoods;
  3. Second countable: the topology has a countable basis.

The last two conditions exclude pathologies such as the line with two origins (locally Euclidean but not Hausdorff). A surface is a 2-manifold. Each homeomorphism φ: U → φ(U) ⊆ ℝⁿ is a chart; a family of charts covering M is an atlas.

Examples:

  • ℝⁿ itself (one chart).
  • The circle S¹ (a 1-manifold) and the sphere S² = {(x, y, z) : x² + y² + z² = 1}.
  • The torus S¹ × S¹: a product of manifolds is a manifold.
  • The Möbius band, Klein bottle and real projective plane (the first is a surface with boundary).
  • A cube's surface is a sphere in disguise: homeomorphic to S².
  • A cone with its apex is not a manifold at the apex (but is one away from it).

"Manifold with boundary" allows neighborhoods that look like a half-plane {y ≥ 0}. The disk, cylinder and Möbius band are surfaces with boundary. Closed surfaces are compact with no boundary.

Charts for the sphere

No single chart covers the whole sphere, since S² is compact and an open subset of ℝ² homeomorphic to it would have to be compact too, which an open subset of the plane cannot be. Two charts suffice: stereographic projection from the north pole N = (0, 0, 1) and from the south pole S = (0, 0, −1).

Projecting from N sends (x, y, z) with z ≠ 1 to (x/(1 − z), y/(1 − z)). Projecting from S sends z ≠ −1 to (x/(1 + z), y/(1 + z)). The overlap of the two charts is S² minus both poles, and the transition map between them is w ↦ w/|w|² (inversion in the unit circle), which is smooth and invertible.

Python Two stereographic charts and the transition map w → w/|w|²

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Each chart misses exactly one point (its pole), so the two together cover the sphere. The check confirms that whichever chart you use you describe the same point, related by w ↦ w/|w|².

Surfaces from polygons

Every closed surface can be made from a polygon whose edges are glued in pairs. Write a word: walk around the polygon and record each edge as a letter with exponent +1 or −1 depending on direction. Examples: a a⁻¹ (sphere), a b a⁻¹ b⁻¹ (torus), a a (projective plane), a b a⁻¹ b (Klein bottle).

Two quick facts you can read from a word, assuming every letter appears exactly twice:

  • If some letter appears twice with the same exponent (a ... a), the surface is non-orientable.
  • If every letter appears once with +1 and once with −1, the surface is orientable.
Python A polygon-word reader: validity and orientability

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The reader does not decide which orientable or non-orientable surface you have. For that you need the Euler characteristic, introduced in the next lesson.

Closed surfaces are compact

A closed surface can be covered by finitely many charts, because it is a quotient of a polygon (a compact set). So closed surfaces are compact, connected (the polygon is connected) and Hausdorff. Properties of the manifold such as orientability, the number of boundary circles and the Euler characteristic are homeomorphism invariants. Compactness and connectedness from the earlier chapters are the first two things you check about any surface.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What does it mean for a space to be locally Euclidean of dimension n?

    That is the first manifold axiom. The other two (Hausdorff, second countable) exclude odd spaces.
  2. 2. Why is the line with two origins not a manifold?

    The two origins cannot be separated by disjoint open sets, although every point has a neighborhood that looks like an interval.
  3. 3. How many stereographic charts are needed to cover the sphere S²?

    Each projection misses one pole. Two charts (from the north and from the south pole) cover the sphere. One chart is impossible since S² is compact.
  4. 4. The polygon word a b a b contains each letter twice with the same exponent. What does that tell you?

    A repeated letter with the same sign signals a flipped gluing, hence a non-orientable surface (the word a b a b describes the projective plane).

Summary

  • A manifold is locally Euclidean, Hausdorff and second countable; a surface is a 2-manifold.
  • Charts and atlases describe the local structure; the sphere needs two charts.
  • The transition map between stereographic charts is w ↦ w/|w|².
  • Boundary words of glued polygons describe closed surfaces; a repeated letter with equal exponents signals non-orientability.
  • Closed surfaces are compact and connected.

Next: Euler Characteristic of Surfaces