Skip to content
Tutorials Center
My learning

Topics

Lesson 21 of 37 · Alcohols, Halides and Ethers

Reactions of Alcohols

Learn how primary, secondary and tertiary alcohols behave when oxidized, dehydrated, burned or converted to haloalkanes and esters, with reagents and worked examples.

The –OH group makes alcohols versatile: they can be burned, oxidized, dehydrated to alkenes, turned into haloalkanes, and joined to acids to make esters. Which products you get depends strongly on whether the alcohol is primary, secondary or tertiary.

Combustion

Like other organic fuels, alcohols burn in plenty of oxygen to give carbon dioxide and water. For ethanol:

Text
C2H5OH + 3 O2 → 2 CO2 + 3 H2O

Check the balance: carbon 2 = 2, hydrogen 6 = 6, oxygen 1 + 6 = 7 = 4 + 3. Ethanol is used as a biofuel and blended with petrol.

Oxidation

The usual laboratory oxidizing agent is acidified potassium dichromate(VI), K2Cr2O7 with dilute H2SO4. Orange Cr2O7²⁻ is reduced to green Cr³⁺, so you can see the reaction happen. Writing [O] for oxygen supplied by the oxidant:

Alcohol type Result with acidified dichromate Product type
Primary Aldehyde first, then carboxylic acid RCHO, then RCOOH
Secondary Ketone RCOR'
Tertiary No reaction (stays orange) none

For ethanol: CH3CH2OH + [O] → CH3CHO + H2O, then CH3CHO + [O] → CH3COOH.

The reason is structural. Oxidation removes the hydrogen from the –OH and a hydrogen from the carbon bearing it. A tertiary alcohol has no hydrogen on that carbon, so oxidation cannot proceed without breaking carbon–carbon bonds.

To stop at the aldehyde, heat the mixture and distill the aldehyde off as it forms, because it boils at a lower temperature than the alcohol (it cannot hydrogen-bond to itself). To reach the acid, use excess oxidant and heat under reflux, so the vapors condense and return to the flask until oxidation is complete.

Python Predict the oxidation product

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Dehydration to alkenes

Heating an alcohol with an acid catalyst such as concentrated sulfuric acid or phosphoric acid removes water from adjacent carbons and forms a double bond: an elimination reaction.

Text
CH3CH2OH → CH2=CH2 + H2O      (conc. H2SO4 or H3PO4, about 170 °C for sulfuric acid)

Dehydration of ethanol is a route to ethene, which is used to make polymers. Industrially ethene mostly comes from cracking, but bio-ethanol dehydration is an alternative from renewable sources. If you heat with a lower temperature and excess ethanol you can instead form an ether (see ethers and thiols).

Conversion to haloalkanes

The –OH group can be replaced by a halogen, reversing the hydrolysis you saw in haloalkanes:

  • Bromoalkane: heat with sodium bromide and concentrated sulfuric acid (this makes HBr in the flask), or use phosphorus tribromide, PBr3.
  • Chloroalkane: use phosphorus(V) chloride, PCl5, which gives steamy white fumes of hydrogen chloride, or thionyl chloride, SOCl2.
Text
CH3CH2OH + PCl5 → CH3CH2Cl + POCl3 + HCl

The fumes of HCl appearing with PCl5 are a classic test for an –OH group.

Esterification

An alcohol reacts with a carboxylic acid, with a few drops of concentrated sulfuric acid as catalyst, to give an ester and water. The reaction is reversible:

Text
CH3COOH + CH3CH2OH ⇌ CH3COOCH2CH3 + H2O

The product is ethyl ethanoate, a fruity-smelling ester. The full story is in esters and esterification.

Reaction with sodium

Alcohols react slowly with sodium metal, releasing hydrogen and forming an alkoxide:

Text
2 CH3CH2OH + 2 Na → 2 CH3CH2ONa + H2

This is much calmer than the reaction of sodium with water, because the O–H bond in alcohols is slightly harder to break.

Counting products by mass

Python Mass of ethene from ethanol

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Use the dichromate color change as evidence: orange to green means the alcohol was primary or secondary; staying orange points to a tertiary alcohol.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What is the final organic product when propan-1-ol is heated under reflux with excess acidified dichromate?

    A primary alcohol is oxidized to an aldehyde and then, under reflux with excess oxidant, to a carboxylic acid.
  2. 2. Which alcohol is NOT oxidized by acidified dichromate?

    A tertiary alcohol has no hydrogen on the carbon bearing the OH group.
  3. 3. What are the products of heating ethanol with concentrated sulfuric acid at about 170 °C?

    Dehydration removes H and OH from adjacent carbons to form a C=C double bond and water.
  4. 4. Which observation indicates an OH group when PCl5 is added?

    PCl5 swaps the OH for Cl and produces HCl gas, which fumes in moist air.

Summary

  • Alcohols burn to carbon dioxide and water.
  • Primary alcohols oxidize to aldehydes then acids, secondary to ketones, tertiary resist.
  • Acid-catalyzed dehydration gives alkenes; PCl5, PBr3 or SOCl2 give haloalkanes.
  • Alcohols and carboxylic acids form esters; sodium gives alkoxides and hydrogen.

Next: Ethers and Thiols