Skip to content
Tutorials Center
My learning

Topics

Lesson 36 of 37 ยท Projects and Practice

Practice: Reaction Pathways

Link organic reactions into multi-step pathways: map functional group conversions, plan syntheses of acids, esters and amines, and search routes with a short program.

Organic synthesis is like finding a route on a map. Each reaction is a road between two functional groups, labeled with the reagents you must use. Once you know the main roads, you can plan a journey from any starting compound to a target in a few steps. This practice lesson gathers the reactions from this chapter and the previous ones into a single map, then asks you to plan routes.

The map

flowchart LR
  HA["Haloalkane"] -->|"aqueous NaOH, warm"| AL["Alcohol"]
  AL -->|"conc. H2SO4, heat"| AK["Alkene"]
  AK -->|"HBr"| HA
  AL -->|"K2Cr2O7/H+, distil"| AD["Aldehyde"]
  AD -->|"K2Cr2O7/H+, reflux"| CA["Carboxylic acid"]
  AD -->|"NaBH4"| AL
  HA -->|"KCN in ethanol"| NI["Nitrile"]
  NI -->|"dilute acid, reflux"| CA
  NI -->|"LiAlH4"| AM["Amine"]
  HA -->|"excess NH3 in ethanol"| AM
  CA -->|"alcohol + H2SO4"| ES["Ester"]

A map of the functional-group conversions covered in this track. Each arrow is one step with its reagents.

Some reactions are missing from the picture to keep it readable: the reduction of ketones to secondary alcohols with NaBH4, the oxidation of secondary alcohols to ketones, the conversion of acids to acyl chlorides with SOCl2, and the reaction of acyl chlorides with ammonia to give amides.

Worked example 1: bromoethane to propanoic acid

The target has one more carbon than the starting material. The only reaction on the map that lengthens a chain is the nitrile route:

  1. CH3CH2Br + KCN โ†’ CH3CH2CN + KBr (heat under reflux in ethanol; nucleophilic substitution).
  2. CH3CH2CN + 2 H2O + Hโบ โ†’ CH3CH2COOH + NH4โบ (heat under reflux with dilute acid; hydrolysis).

Two steps. Cyanide is highly toxic: this is a route to understand, and it may be done only in properly equipped laboratories.

Worked example 2: ethanol to ethyl ethanoate

An ester needs an acid and an alcohol. The alcohol is already there; you must make the acid from it:

  1. Oxidize ethanol to ethanoic acid: heat under reflux with excess acidified dichromate.
  2. Warm ethanoic acid with more ethanol and a few drops of concentrated sulfuric acid to form the ester.

Because the ester needs the same alcohol that was used as starting material, half of the ethanol is oxidized and half kept back.

Worked example 3: ethanal to ethanamine

An amine can come from a nitrile or a haloalkane. Going from CH3CHO (2 carbons) to CH3CH2NH2 (also 2 carbons): reduce the aldehyde to ethanol (NaBH4), convert the alcohol to bromoethane (PBr3, or NaBr with sulfuric acid), then heat with excess ammonia in ethanol. Three steps.

Always check the carbon count first. A route that adds a carbon (cyanide) is different from one that keeps the skeleton the same (oxidation, reduction, substitution with OH or NH3).

Finding routes with a program

The program below stores the map as a graph and does a breadth-first search for the shortest sequence of reactions between two functional groups. It is a study aid and covers only the reactions listed in this lesson; it does not know about yields, side reactions or carbon counts.

Python Shortest synthesis route

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

On this map the search needs four steps from an aldehyde to an amine (via the alcohol, alkene and haloalkane). The table has no direct alcohol-to-haloalkane road, although one exists in real chemistry (PBr3 or PCl5). Try adding ("alcohol", "haloalkane", "PBr3") and run it again: the route shrinks to three steps.

Python Yield of a two-step route

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Long routes lose material at each step, which is why chemists try to use as few steps as possible.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Which reagent pair lengthens a carbon chain by one carbon, starting from a haloalkane?

    The cyanide carbon becomes the new carboxyl carbon after hydrolysis of the nitrile.
  2. 2. What is the final product of heating ethanol under reflux with excess acidified dichromate?

    Reflux with excess oxidant takes a primary alcohol all the way to the carboxylic acid.
  3. 3. Which step makes an ester from ethanoic acid?

    Acid-catalyzed esterification joins the acid and the alcohol, releasing water.
  4. 4. A three-step route has step yields of 90%, 80% and 50%. What is the overall yield?

    0.90 ร— 0.80 ร— 0.50 = 0.36, or 36%.

Summary

  • Treat reactions as roads on a map: each has a starting group, an ending group and reagents.
  • Check carbon count first; the nitrile route is the way to add one carbon.
  • Oxidation conditions decide aldehyde (distil) versus acid (reflux).
  • Overall yield is the product of the step yields, so short routes are better.

Next: Project: Molar Mass and Formula Calculator