Skip to content
Tutorials Center
My learning

Topics

Lesson 31 of 37 Β· Polymers and Biomolecules

Addition Polymers

Learn how alkene monomers join into addition polymers such as polyethene, PVC and polystyrene, how to draw repeat units, and how to calculate chain length from molar mass.

A polymer is a very large molecule built from many small repeating units called monomers. The word comes from the Greek for "many parts". Plastic bags, drink bottles, non-stick pans, foam cups and water pipes are all made of polymers. The simplest family to understand is that of addition polymers, formed when alkene monomers join in a long chain with nothing lost.

Addition polymerization

Each monomer has a C=C double bond. In polymerization, one of the two bonds in each double bond opens up, and the freed electrons form new single bonds to neighboring monomers. No atoms are lost, so the polymer has the same empirical formula as the monomer. Chain lengths run from hundreds to hundreds of thousands of units.

Ethene polymerizes like this:

Text
n CH2=CH2  β†’  –(CH2–CH2)n–

The n is the degree of polymerization, the number of repeat units in a chain. The bracketed unit with the open bonds is the repeat unit. It has the same atoms as the monomer, but the double bond has become a single bond.

Drawing the repeat unit

  1. Draw the monomer with the C=C in the middle and the other groups above and below.
  2. Open the double bond into a single bond and show a long bond sticking out on each side.
  3. Put brackets around it and write n.

For a monomer CH2=CHX (X is a substituent), the repeat unit is –(CH2–CHX)n–.

Monomer Polymer Substituent X
ethene CH2=CH2 poly(ethene), polythene H
propene CH2=CHCH3 poly(propene) CH3
chloroethene CH2=CHCl poly(chloroethene), PVC Cl
phenylethene (styrene) CH2=CHC6H5 poly(phenylethene), polystyrene C6H5
tetrafluoroethene CF2=CF2 PTFE, Teflon (all four are F)

The name of the polymer is poly( + the monomer name + ). IUPAC names put the monomer in brackets; common names use trade or short names, such as PVC or PTFE.

flowchart LR
  M["Many monomers<br/>CH2=CHCl"] -->|"initiator, pressure"| P["Polymer chain<br/>–(CH2–CHCl)n–"]

The double bond opens and monomers link end to end.

Python Repeat unit and molar mass

Press Run (or Ctrl + Enter) to see the result here.

Program input Β· what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Properties and uses

Addition polymers are mostly non-polar, saturated chains held together by dispersion forces between molecules, so they are flexible, water-resistant and electrical insulators. The properties depend on the groups attached and how the chains pack.

  • Poly(ethene): made as low-density (LDPE; branched chains that pack loosely, used for films and bags) and high-density (HDPE; mostly unbranched chains that pack closely, so it is stiffer and stronger, used in bottles and crates).
  • Poly(propene): stiff, resists fatigue; ropes, crates, car parts, food containers.
  • PVC: chlorine makes the chains polar so they attract more strongly. The raw polymer is rigid (pipes, window frames); with added plasticizers it is flexible (cables, flooring).
  • Polystyrene: a clear hard solid, or a light foam when gas is blown through it (insulation, packaging).
  • PTFE: the C–F bonds are very strong and the surface has very low friction, hence non-stick coatings. It resists most chemicals.

Chain length and molar mass

Real samples contain chains of different lengths, so a polymer has an average molar mass. If you know it, you can estimate n:

n = (average molar mass of polymer) / (molar mass of the repeat unit)

For PVC, the repeat unit C2H3Cl has a molar mass of about 62.5 g/mol. A sample with an average molar mass of 125,000 g/mol has n β‰ˆ 2,000.

Python Degree of polymerization

Press Run (or Ctrl + Enter) to see the result here.

Program input Β· what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Environmental issues

Addition polymers are very resistant to attack by microorganisms: C–C bonds in a long saturated chain are strong and non-polar, so these plastics are not biodegradable. They persist in landfill and in oceans, where they break into tiny fragments (microplastics). Options for handling waste:

  • Recycling: sort, melt and re-mold thermoplastics. This saves resources but is hard when plastics are mixed.
  • Incineration with energy recovery: burns polymers to release heat, but chlorine-containing plastics such as PVC produce hydrogen chloride, which has to be removed from the exhaust gases.
  • Feedstock recycling: heat the polymer to break it back into small molecules for new chemicals.
  • Using less and designing for reuse.

Plastic materials are made from crude oil or natural gas, so addition polymers are a use of non-renewable feedstock. Biobased alternatives exist, but they are not all biodegradable and not all compostable.

Check your understanding

Quick check Β· 4 questions

of 4 answered You scored / 4 Β· perfect!

  1. 1. What is the repeat unit of poly(propene)?

    Propene is CH2=CHCH3; opening the double bond gives the repeat unit CH2–CH(CH3).
  2. 2. Which monomer makes PVC?

    PVC is poly(chloroethene), made from CH2=CHCl.
  3. 3. Why are addition polymers generally not biodegradable?

    Strong, non-polar carbon chains are not easily broken down by enzymes or water.
  4. 4. A polymer sample has an average M of 56,000 g/mol and a repeat unit of 28 g/mol. What is n?

    56,000 Γ· 28 = 2,000 repeat units.

Summary

  • Addition polymers form when alkene monomers open their C=C bonds and link, with no atoms lost.
  • The repeat unit has the monomer's atoms with a single bond in place of the double bond.
  • Properties depend on side groups and chain packing: LDPE vs HDPE, rigid vs flexible PVC, non-stick PTFE.
  • n = average polymer molar mass divided by the repeat-unit molar mass.
  • Addition polymers resist biodegradation; recycling and reduced use help.

Next: Condensation Polymers