Skip to content
Tutorials Center
My learning

Topics

Lesson 31 of 36 ยท Export and Workflows

CMYK, Print Color, Bleed and Packaging

Prepare Illustrator files for print: CMYK versus RGB, spot colors, bleed and crop marks, overprint, File > Package, with runnable Python stand-ins for color and bleed math.

Screens mix light (RGB), printers mix ink (CMYK: cyan, magenta, yellow and key/black). The same artwork must be prepared differently for each. This lesson covers the print-side settings in Illustrator that prevent surprises when files go to a printer.

Illustrator does not run on this site. The Python code is a set of stand-ins: a naive color converter and a bleed calculator. They are not color-managed.

Set the right color mode

  • Choose File > New with a Print profile (color mode CMYK), or switch an existing file with File > Document Color Mode > CMYK Color.
  • The Color Mode of the document decides how new colors are defined. Colors from RGB swatches are converted using your color settings (Edit > Color Settings) and profiles such as U.S. Web Coated SWOP, FOGRA39 or Coated GRACoL. Ask your printer which profile to use.
  • Bright RGB colors (neon green, electric blue) are often out of gamut; a small warning triangle in the Color panel shows it and offers the closest printable color.

Stand-in: naive RGB to CMYK

The textbook formula below ignores ICC profiles, so it differs from Illustrator's conversion. It illustrates the idea only.

Python Stand-in: naive RGB to CMYK

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Notice that pure RGB black becomes only K=100 here. In real workflows a deep black for large areas often uses a rich black with some cyan, magenta and yellow added, while small text should stay 100 K only to avoid misregistration.

Total ink coverage

Each ink is a percentage; adding them gives total ink coverage (also called TAC). Presses limit it, commonly to about 300 percent on coated paper and lower for newsprint. Check the limit with your printer.

Python Stand-in: total ink coverage check

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Spot colors

A spot color is a pre-mixed ink such as a Pantone color, printed as its own plate. Use them for exact brand colors, metallics or one- and two-color jobs. In Illustrator, open Swatch Libraries > Color Books > PANTONE+ Solid Coated. Spot colors appear in the Swatches panel with a dot in the corner. If a job is four-color process, convert spots to CMYK with Edit > Edit Colors > Convert to CMYK or in the Swatch Options (Color Type: Process).

Bleed, trim and safety

Printers print on large sheets and cut them down (trim). To avoid thin white edges, artwork that touches the edge must extend beyond it: the bleed, usually 3 mm (0.125 in). Keep text and logos inside a safety margin at least 3 to 5 mm inside the trim.

In Illustrator:

  • Set the bleed when creating the document (Bleed fields in the New Document dialog) or later in File > Document Setup.
  • A red guide line appears outside the artboard; extend backgrounds to it.
  • Add crop marks (Effect > Crop Marks, or in File > Print > Marks and Bleed; PDF output uses the Marks and Bleeds panel).

Stand-in: sheet size with bleed

Python Stand-in: size with bleed and safe area

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

For a 90 x 55 mm business card, the file with bleed is 96 x 61 mm.

Overprint and black

  • Overprint prints one ink over another instead of knocking it out. Black text normally overprints so that small registration errors do not leave a white halo. Check with View > Overprint Preview (Alt/Option+Shift+Ctrl/Cmd+Y). Set it in the Attributes panel.
  • Do not overprint white by accident: it disappears.

Fonts and images

  • Place images at 300 ppi at final size; links should be in CMYK (or let the printer's workflow convert).
  • Embed or outline all fonts, or package them.

Package and export a PDF

File > Package gathers the .ai file, linked images and fonts (where the license allows) into a folder, and writes a report. Alternatively choose File > Save As > Adobe PDF and pick the PDF/X-4 preset (or the preset your printer supplies), add trim marks and bleed, and verify with Window > Document Info or Acrobat's Preflight.

Before sending:

  1. Remove unused swatches and layers.
  2. Check Window > Separations Preview for unexpected plates.
  3. Convert text to outlines or package fonts, as discussed in type outlines.
  4. Check the contrast of text in the color version lesson.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. What is bleed?

    Bleed is the extra area, usually 3 mm, that is trimmed away.
  2. 2. Which describes a spot color?

    Spot inks are special inks used for exact color or special effects.
  3. 3. Why use 100 K only for small text?

    One plate avoids registration problems.
  4. 4. What does File > Package do?

    It gathers everything a printer needs.

Summary

  • Use CMYK for print and know the printer's profile and ink limit.
  • Spot colors are separate inks; process colors are CMYK mixes.
  • Add 3 mm bleed, trim marks and a safety margin.
  • Package or export to PDF/X with fonts handled.
  • The Python snippets are naive stand-ins, not color-managed conversions.

Next: Asset Export and Naming