Skip to content
Tutorials Center
My learning

Topics

Lesson 15 of 36 ยท Colour and Gradients

Colour Modes: RGB and CMYK

Understand RGB, CMYK, grayscale and HSB colour in Illustrator, why screen and print colours differ, how to set the document mode and use the Color panel.

Colour in Illustrator is not one thing. The same orange can be described by light (RGB), by ink (CMYK) or by hue, saturation and brightness (HSB). Choosing the right model for the job prevents dull prints and surprise colour shifts.

RGB: light

RGB (red, green, blue) is an additive model: screens start black and add light. Each channel runs from 0 to 255 (or 0 to 100%). Full red, green and blue make white. RGB has a wide gamut, including very vivid colours. Use it for websites, apps, video and anything viewed on a screen.

Web colours are written in hex, such as #e8590c, which is simply the three channels in base 16.

CMYK: ink

CMYK (cyan, magenta, yellow, key/black) is a subtractive model: paper starts white and ink absorbs light. Values are percentages from 0 to 100. It has a smaller gamut than RGB, so neon greens, electric blues and saturated oranges look duller. Use CMYK for most commercial printing.

Convert a vivid RGB design to CMYK and some colours will shift, sometimes a lot. Always judge print colours in CMYK mode, and ideally against a printed swatch book such as a Pantone or ink-sample guide.

Other models

  • Grayscale: a single black channel, 0 to 100%.
  • HSB: hue (0 to 360 degrees), saturation and brightness. Handy for choosing related colours.
  • Web Safe RGB and Spot colours (Pantone and other ink libraries) exist for special cases.

Setting the mode

  • File > Document Color Mode > RGB Color / CMYK Color changes the whole document.
  • The Color panel (Window > Color, F6) offers a mode via its panel menu (Grayscale, RGB, HSB, CMYK, Web Safe RGB). This changes the sliders only, not the document mode.
  • A warning triangle near a swatch or slider means "out of gamut" for the print profile. Click the small colour swatch beside it to snap to the nearest printable colour.

Hex, RGB and HSB

Moving between these is arithmetic, and you can run it right here.

JS Stand-in: hex to RGB to HSB

Press Run (or Ctrl + Enter) to see the console output here.

No output.

A naive RGB to CMYK conversion

The simplest formula shows the idea (black is "what is left over"). Real conversions use ICC colour profiles, which is why Illustrator's CMYK numbers differ from this textbook result.

JS Stand-in: naive RGB to CMYK

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Note how the pure RGB black becomes 100% K only. In real print, a rich black adds some CMY ink, but text should stay plain 100% K.

Colour profiles and management

A colour profile (ICC profile) describes how numbers map to real colours on a device. Illustrator uses Edit > Color Settings to choose working spaces: usually sRGB for web and a regional CMYK profile such as U.S. Web Coated (SWOP) or Coated FOGRA39. Ask your printer which to use. Edit > Assign Profile and Convert to Profile change documents between profiles.

Practical rules

  1. Decide the output first: screen means RGB, print means CMYK.
  2. Do not convert back and forth; each round trip loses vividness.
  3. Use 100% K for small black text and thin lines.
  4. Avoid total ink above about 300% in CMYK, as many presses reject it.
  5. Use spot colours (Pantone) for brand colours that must match exactly or for special inks.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Which colour model is additive?

    RGB adds light; screens start black and mix red, green and blue light.
  2. 2. Why can bright RGB colours dull when converted to CMYK?

    Ink cannot reproduce some of the very saturated colours a screen can show.
  3. 3. What does the K in CMYK stand for?

    K is the key plate, which prints black.
  4. 4. What is the range of each RGB channel in 8-bit colour?

    8-bit channels have 256 levels, 0 to 255.

Summary

  • RGB is for screens (additive, wide gamut); CMYK is for print (subtractive, smaller gamut).
  • Set the document colour mode to match your final output.
  • Hex is RGB in base 16; HSB is easier for picking related colours.
  • ICC profiles, not simple formulas, drive real conversions; keep text in 100% K.

Next: Swatches and Global Colours